Nywint DT433-D4 Manual de usuario
DT-ENG-433-D4-V2
DT433-D4
2 WIRE INTERCOM SYSTEM
4.3" COLOR TFT MONITOR
Note!
• Due to newer software and chips, the functions and parameters have changed.
• Please read this manual carefully before using the product you purchase,and keep it well for future use.
• Please note that images and sketch maps in this manual may be different from the actual product.
•
• VERSION 05/01/2022
-1-
1. Parts and Functions
1 2 3 4 5 6
ON DIP
LCD Screen
Microphone Speaker
Talk/Mon Button
Unlock Button
Call Button/
Unlock 2nd Button
Setting Button
Down Button
Up Button
DIP
Bus Line
Microphone Receive voice from the user.
Speaker Send out vioce from the visitor.
LCD screen Display the visitors' image.
Setting button Press to select the setting item you want.
Down button Press to decrease the value.
Up button Press to increase the value.
Talk/Mon button Press to communicate hands free with visitor;
Press to view the outdoor condition in standby mode.
Unlock button Press to release the door
Call button/Unlock
2nd button
In standby mode, pick up handset, then press Call button to
activate the inner call;
During calling/talking state, press Unlock 2nd button to
release the second door.
DIP Setting the monitor's address.
Bus line Connect power supply.
Key functions
-2-
3. Main Menu
The Main menu is your starting point for using all the applications on your monitor.
Press Setup button, or Down button, or Up button in standby mode, the Main menu will
appear as follow:
* 1. If you want to activate Divert and Memory, DT-IPG should be connected to the system.
2. Current date and time: You can also synchronize the system time via clock server. Please refer to the
related manual for detailed instructions.
10:50 AM 02/09/2017 Sat.
Monitor
Press it to view outdoor
condition.
Door Release Intercom
Press it to enter intercom
selections.
Setting
Press it to enter setup page.
Memory
Press it to play recorded
images or videos from door
stations.
Divert
Press it to activate the
Divert function.
Current date and time.
2. Monitor Mounting
1
Mounng low cover
2 3 4
Front panel Front panel
Mounng low cover
Mounng low cover
Put the bus line plug xed to the Mounting low cover, and then use the screws to x the
Mounting low cover on the wall.
The Front panel through the left side of the two buckle hanging on the Mounting low
cover.
-3-
4. Basic Door Release Operation
1. Press Call button on outdoor station, the Monitor
rings, at the same time, the screen displays the
visitors' image.
2. Press Talk/Mon button on monitor, you
can communicate hands free with the visitor
for 90 seconds. After nishing communication,
press Talk/Mon button again to end the communication. If nobody answers the
phone, the screen will be turned off automatically after 40 seconds.
3. During talking state, Press Unlock button to open the door for the visitor.(if
two locks are connected to door camera, press Unlock 2nd button to release
the second lock )
4. When the monitor is in standby mode, press Talk/Mon button, the screen can
display the view of outside. At this time, if multi door stations are installed, you can
use / button to switch the door station or CCTV camera you want.
DS-1
00:26
5. Intercom Function
It is available to call between monitors in the same room or in the same system,or call
the Guard Monitor. Follow the steps to activate the functions:r
Calling other monitors in the same systemt intercom page in shortcut.
(1)When the monitor is in standby mode, press Setting button to enter main menu
page.*
(2)Press Call button/Unlock 2nd button to enter Intercom page.
(3)Press Call button/Unlock 2nd button again to enter Intercom Call page.
(4)Select the building number and room number you want, and then press Talk/Mon
button to call the corresponding user.
(5)Intercom calling. If the call is answered,conversation is activated.m page in shortcut.
-4-
Calling monitors in the same roomercom page in shortcut.
（1） （2） （3） （4） （5）
Close Redial
12
1
3
DecInc
*Note:
1. Press Call button/Unlock 2nd button on panel in standby mode to enter Intercom page in shortcut.
2. If the DT-IPG connected to the system, the system support 8-digit input, 4-digit building number, 4-digit
room number, each can be individually changed. If not, you can only input 2-digit room number, the range is
01~32, otherwise the system will prompt error.
3. The system will automatically displays the last dial number when enter the dial-up interface.
4. The mode of building/room number must be 4-digit(such as 5678) or 2-digit(such as 89), do not allow the
middle space(such as 12 3), otherwise the system will prompt error.
(1)When the monitor is in standby mode, press Setting button to enter main menu
page.*
(2)Press Call button/Unlock 2nd button to enter Intercom page.
(3)Press Up button to activate Inner Call.
(4)Inner calling. all other monitors in the same room will ring at the same time,whichever
monitor answers the call, conversation is started, other monitors will stop ringing at once.
(Calling ends automatically after 30 seconds if nobody answers the call)
ct intercom page in shortcut.
（1） （2） （3） （4）
Close Redial
Calling the guard monitorntercom page in shortcut.
A Monitor can be assigned as Guard Unit Monitor.
(1)When the monitor is in standby mode, press Setting button to enter main menu
page.*
(2)Press Call button/Unlock 2nd button to enter Intercom page.
(3)Press Down button to activate Guard Unit.
-5-
(1)When the monitor is in standby mode, press Setting button to enter main menu
page.*
(2)Press Down button to enter Memory page.
(3)Press Talk/Mon button to activate Delete item, and it will show "?" on the screen.
(4)Press Talk/Mon button again to delete this image/video.
(5)Delete this image/video nally.
ct intercom page in shortcut.
（1） （2） （3） （4）
Close Redial
(4)Guard unit calling. when the Guard Unit Monitor answers the call, conversation with
the guard person is started.
6. Opening Staircase Light
Note: The staircase light should be connected on the system, and this function should be supported
by RLC. Please refer to RLC user instruction in detail.
Press Unlock button on main menu page to open the staircase light, the staircase light will be
turned o automatically after 60 seconds.
*Press Unlock button again to turn off the light.
7. Memory(No Memory without DT-IPG and SD card)
The recorded images/videos can be playback on monitor.
You can also delete the images/videos. Follow the steps:
（1） （2） （3）
159xxxx6893
123456
2/9
（4）
159xxxx6893
123456
??
2/9
（5）
159xxxx6893
123456
2/8
-6-
（1） （2） （3） （4）
(1)When the monitor is in standby mode, press Setting button to enter main menu
page.*
(2)Press Up button to enter Divert page.
(3)Follow the instructions to select the item you want.
(4)After the call mode is selected, it returns to the last menu.
8. Divert Call(DT-IPG is necessary)
The calling from door station can be diverted to your phone. please note that this function
should be supported by the unit of IPG.
Note:
* The status bar on main menu page will show " " icon.
* The time limited with the phone is 90s.
Three modes can be selected.
1. No Divert: Calls from outdoor station will not be diverted.
2. Divert, If No Answer: If nobody answers the call in 30s when receives call from door
station, diverts the call to the phone.
At this mode, the monitor will shut off the screen after diverting successfully, but you
can still use it in normal.
3. Divert, Simultaneously: When receives call from door station, diverts the call to the
phone immediately.
At this mode,the monitor will always open the screen and show image from door sta-
tion during diverted, if the monitor answers the call at this time,diverted will conclude at
once.
Follow the steps to activate this function:
-7-
（1） （2） （3） （4）
Addr : 1001
Server : 47.91.88.33
Name : 820931353332001
Pwd : 10031
How to get QR code, follow the steps:
* Press Talk/Mon button could change password.
Usage: After changing password, the QR code will change, then the previous tenant will longer log in. And
new customer can use his/her phone to scan this new QR code and log in.
9.Download Setup VDP Connect APP
1. Scan and download VDP Connect APP, or search “VDP Connect” on APP store.
IOS Android
2. Permit “VDP Connect” with internet access and camera, on monitor, in QR code page
, and keep in QR code page. on VDP Connect APP, press on middle bottom, to scan QR
code on monitor, and press “Save”.
Addr : 1001
Server : 47.91.88.33
Name : 820931353332001
Pwd : 10031
-8-
3. After login SIP account on VDP Connect APP, check on status bar, or tap on the
“Connected” area to manually register, until VDP Connect display:
-9-
Inercom call tone setting
（1） （2） （3）
09
twice
(1)When the monitor is in standby mode, press Setting button to enter main menu
page.*
(2)Press Setting button twice to enter intercom call tone setting page.
(3)Use / button to select the tone you want.
11. Basic Setup Instructions
Door station call tone setting
（1） （2） （3）
06
(1)When the monitor is in standby mode, press Setting button to enter main menu
page.*
(2)Press Setting button again to enter door station call tone setting page.
(3)Use / button to select the tone you want.
Tabla de contenidos
Otros manuales de Sistema de intercomunicación de Nywint
