Nvidia Quadro K6000 Manual de usuario

NVIDIA Quadro K6000

Graphics Card

Installation instructions for HPE

WS460c Graphics Expansion Blade

and HPE servers

Overview

This document provides instructions for installing an NVIDIA Quadro

K6000 graphics card into the HPE ProLiant WS460c Gen8 Graphics

Expansion Blade.

For software installation information, see the Microsoft Windows on

ProLiant WS460c Gen8 Workstation Blade with WS460c Graphics

Expansion Blade Administrator Guide.

Kit contents

•

NVIDIA Quadro K6000 graphics card (225W)

•

PCI expansion bracket

•

Double-wide retention bracket

•

Screws

•

This document

Additional requirements

You can add more ProLiant servers for future support. For

requirements specific to each individual server, see the individual

hardware documentation.

Replacing NVIDIA Quadro 5000

and 6000 graphics cards

IMPORTANT: This procedure is for replacing NVIDIA

Quadro 5000 and 6000 graphics cards only on the Gen8

graphics expansion blade. Earlier generations do not

support this card.

Required tools for this procedure:

•

T-10/T-15 Torx screwdriver (provided inside the server)

•

HPE Insight Diagnostics software

To remove the graphics card from the graphics expansion blade:

1. Power down the WS460c Gen8 Expansion Blade.

2. Remove the WS460c Gen8 Expansion Blade.

3. Remove the WS460c Graphics Expansion Blade access panel.

4. Remove the WS460c Graphics Expansion Blade PCIe card

cage.

5. Disconnect any power cables from the graphics card,

disconnect the retaining screws, and then remove the graphics

card from the card cage.

6. Insert the NVIDIA Quadro K6000 graphics card into the card

cage.

7. Install two screws at the I/O connector panel to secure graphics

card to the card cage.

8. Install the card cage to the WS460c Gen8 Expansion Blade.

9. Install power cables to the graphics card power connector

located at the end with cooling fan.

The information contained herein is subject to change without

notice. The

only warranties for Hewlett Packard Enterprise products and services are set

forth in the express warranty statements accompanying such products and

services. Nothing herein should be construed as constituting an additional

warranty. Hewlett Pa

ckard Enterprise shall not be liable for technical or

editorial errors or omissions contained herein.

Part Number: 734583-002

November 2015

Edition: 2

10. Install access panel and reinstall the WS460c Gen8 Expansion

Blade to the enclosure.

The installation is complete. For more removal and replacement

information, see the ProLiant WS460c Gen8 Workstation Blade with

WS460c Graphics Expansion Blade Maintenance and Service

Guide.

Installing the graphics card on the

DL/ML/SL Server

Required tools for this procedure:

•

#2 Phillips screwdriver

•

T-10/T-15 Torx screwdriver (provided on back of the server)

Before installing the card, check the hardware and specification

documentation of the server to be installed and confirm that the

NVIDIA Quadro K6000 is supported. For high-level installation

instructions, follow these steps. For more specific installation

information, see the individual server documentation.

1. Use a Phillips screwdriver to remove the standard extender

from the graphics card.

2. Install the short extender on the graphics card. Tighten screws

until snug.

CAUTION: Do not over tighten screws.

3. Power down the server.

4. Follow your server specific hardware documentation to

remove, replace, or install the NVIDIA Quadro K6000 graphics

card.

5. Power up the server.

6. Download and install the latest drivers from the Hewlett

Packard Enterprise or NVIDIA website.

The installation is complete.

Otros manuales de Tarjeta de video de Nvidia

Nvidia

Nvidia QUADRO G-SYNC II Manual de usuario

Nvidia

Nvidia GeForce FX Series Manual de usuario

Nvidia

Nvidia 9600GSO - PV-T96O-SDFH-OC GeForce - SLI... Manual de usuario

Nvidia

Nvidia NVS 810 Manual de usuario

Nvidia

Nvidia GV-N430-2GI Manual de usuario

Nvidia

Nvidia nForce 590 SLI Manual de usuario

Nvidia

Nvidia Quadro 6000 Manual de usuario

Nvidia

Nvidia GeForce 6 series Manual de usuario

Nvidia

Nvidia Quadro Manual de usuario

Nvidia

Nvidia Titan RTX Manual de usuario

Nvidia

Nvidia GeForce RTX 2060 SUPER Manual de usuario

Nvidia

Nvidia 6800 - GeForce GTO PCI 256MB Graphics Card Manual de usuario

Nvidia

Nvidia VCQFX550PCIEPB - Quadro FX 550 Manual de usuario

Nvidia

Nvidia GeForce GTX 980 Manual de usuario

Nvidia

Nvidia Quadro FX 4700 X2 Instrucciones de funcionamiento y seguridad

Nvidia

Nvidia 3DForce4 MX440-8X Series Manual de usuario

Nvidia

Nvidia GRID K1 Manual de usuario

Nvidia

Nvidia GeForce RTX 3080 Manual de usuario

Nvidia

Nvidia 8400 - BFG GeForce GS Manual de instrucciones

Nvidia

Nvidia Quadro Workstation Manual de usuario

Nvidia

Nvidia MS-8808 Vanta TNT2 M64 Manual de usuario

Nvidia

Nvidia VCQFX4500X2 Manual de usuario

Nvidia

Nvidia GeForce MX420 Manual de usuario

Nvidia

Nvidia FX 1500 Instrucciones de uso

Manuales populares de Tarjeta de video de otras marcas

Gainward

Gainward GeForce GTX 690 4GB Manual de usuario

ATI Technologies

ATI Technologies RADEON 137-40225-20 Manual de usuario

MSI

MSI N220GT series Manual de usuario

ATI Technologies

ATI Technologies RADEON 7000 MAC EDITION Manual de usuario

SIIG

SIIG aurora Manual de usuario

ClearSpeed

ClearSpeed ClearSpeed Advance e720 Manual de usuario

MSI

MSI R7850 series Manual de usuario

DVS

DVS Atomix HDMI Manual de usuario

Aztech

Aztech VGS3D-AGP Manual de usuario

Advoli

Advoli TB4 Standard Manual de usuario

ELSA

ELSA ERAZOR III LT Manual de usuario

Gigabyte

Gigabyte GV-R7500L Manual de usuario

Themis

Themis TGA-7000 PMC Manual de usuario

EMS

EMS XtremeRGB-Ex1 Manual de usuario

Pioneer

Pioneer PDA-5003 Manual de usuario

QDI

QDI N2 Manual de usuario

NEC

NEC N8116-48 Manual de usuario

MSI

MSI R7770 PoweR Edition Manual de usuario