Nuvoton ISD93 Series Manual de usuario

ISD93xx Evaluation Board User Manual

Publication Release Date: Apr. 20, 2016

- 1 - Revision V1.2

ISD93xx Evaluation Board

User Manual

ISD93xx Evaluation Board User Manual

Release Date: Apr. 20, 2016

- 2 - Revision v1.2

The information described in this document is the exclusive intellectual property of

Nuvoton Technology Corporation and shall not be reproduced without permission from Nuvoton.

Nuvoton is providing this document only for reference purposes of ISD ChipCorder microcontroller

based system design. Nuvoton assumes no responsibility for errors or omissions.

All data and specifications are subject to change without notice.

For additional information or questions, please contact: Nuvoton Technology Corporation.

ISD93xx Evaluation Board User Manual

Release Date: Apr. 20, 2016

- 3 - Revision v1.2

1 Introduction

The ISD93xx evaluation board –picture shown below, is a small but rather functionally

complete and flexible board. It consists of two parts, of which if broken either one can run

independently.

Left part –the ISD93xx demo board

Right part –the ISD_Nulink JTAG interface board, which is a Nuc123 application

system

With a USB cable, the evaluation board provides the user a complete hardware

environment for the ISD93xx project development. Under Keil the user can burn the

project program code into the in-system flash and do debugging; also the user can use

ICP tool provided by Nuvoton to burn the ISD93xx configuration bytes, in-system

application ROM, in-system data flash, and the external SPI flash on the ISD93xx demo

board.

In the later stage of a project development, the ISD93xx demo board might be required to

run in standalone mode. In this case, the user can simply break the evaluation board, and

let the left part –the ISD93xx demo board run alone. After the evaluation board is broken

into two pieces, and if the user needs to re-program or debug the system, then user may

either reconnect the two boards back together again via JP9 and JP12, or use Nu_Link

JTAG dongle to provide control interface, see picture below.

ISD93xx Evaluation Board User Manual

Publication Release Date: Apr. 20, 2016

- 4 - Revision V1.2

2 Jumper and Button

ISD93xx Evaluation Board User Manual

Publication Release Date: Apr. 20, 2016

- 5 - Revision V1.2

Jumper setting and button operation are described below:

Part Number

Description

Default

L: ISD93xx demo board

JP1

Soldering pad for RGB LED blue color

Not soldered

JP2

Soldering pad for RGB LED red color

Not soldered

JP3

Soldering pad for RGB LED green color

Not soldered

JP4

Soldering pad for power indicator red LED

Not soldered

Nu_Link dongle connector

Not populated

GPIO expansion port.

Not populated

GPIO expansion port connector. Used to

connect ISD9300 Touch Board.

Power supply

J12

Speaker connector

J13

Soldering pad for VCCD connection

Soldered on bottom

side

Wakeup Button

wakeup device from deep power down

Reset Button

Device reset button

JP12

connector to JTAG interface board

R: Nu_Link JTAG board

Mini USB Type B connector

JP9

Connector to ISD93xx demo board

JP10

Nu_Link dongle connector for Nu_Link

JTAG interface board.

Not populated

JPR

VCC selection for whole system: 5V or

3.3V

Jumper connects pin1

& 2. VCC is 3.3V.

*Note: Remove

jumper when power is

provided from J6 of

ISD93 demo board

ISD93xx Evaluation Board User Manual

Release Date: Apr. 20, 2016

- 6 - Revision v1.2

3 Demo Code

The ISD9300 series evaluation board comes with demo functions ready, which means

the ISD93xx device on board are shipped with default demo code burned. Once the

ISD93xx Touch Board and power supply are connected –see below for the complete

demo system, the system is ready to demo the following functions:

RGB LED randomly changes color when device is idle

oDriven by three channel PWM

Simple sound effect playback

oTouch CS15 once to start loop play one of the four pre-recorded sound

effects; touch CS15 again to stop the playback.

Voice Record and Playback

oTouch CS12 + CS9 then release CS9 to start recording (CS12 is irrelevant

after recording starts)

oTouch CS9 to stop recording

oNow every touch of CS9 will playback the recorded sound effect

Playback volume adjustment

oSwipe the bottom CS0-7 row to increase (from CS7CS0, Left to right) or

decrease (from CS0 CS7, right to left) the playback volume, during

playback, or when there is no active playback.

oThe RGB LED turns green during playback. The brightness of green color

varies indicating volume change.

Voice Recognition (VR)

oVR is constantly running when device is idle. In this idle state, the device

only responds to the leading command which is “Fruit_Color”.

oOnce the leading command “Fruit_Color” is recognized, the RGB LED

will be turned off indicating the device is waiting for further fruit

commands: “apple”,“banana”,“blueberry”, “kiwi”,“orange”or

“peach”.

oWhen the RGB LED is off, saying the fruit command to the device will let

the RGB LED show the corresponding color for ~3 seconds; then the RGB

LED will revert back to off state. In this off state, saying “Fruit_Color”

again will make the system back into idle, indicated by RGB LED randomly

changing color.

ISD93xx Evaluation Board User Manual

Publication Release Date: Apr. 20, 2016

- 7 - Revision V1.2

4 Demo Board Schematic

ISD93xx Evaluation Board User Manual

Release Date: Apr. 20, 2016

- 8 - Revision v1.2

ISD93xx Evaluation Board User Manual

Publication Release Date: Apr. 20, 2016

- 9 - Revision V1.2

5 Revision History

Version

Date

Description

0.1

May 02, 2014

First draft

1.0

Jun 08, 2014

First release

1.1

Apr 08, 2016

RevB, Schematic update

1.2

Apr 20, 2016

Description update.

ISD93xx Evaluation Board User Manual

Release Date: Apr. 20, 2016

- 10 - Revision v1.2

Important Notice

Nuvoton products are not designed, intended, authorized or warranted for use as components

in systems or equipment intended for surgical implantation, atomic energy control

instruments, airplane or spaceship instruments, transportation instruments, traffic signal

instruments, combustion control instruments, or for other applications intended to support or

sustain life. Furthermore, Nuvoton products are not intended for applications wherein failure of

Nuvoton products could result or lead to a situation where personal injury, death or severe

property or environmental damage could occur.

Nuvoton customers using or selling these products for use in such applications do so at their

own risk and agree to fully indemnify Nuvoton for any damages resulting from such improper

use or sales.

Please note that all data and specifications are subject to change without notice. All the

trademarks of products and companies mentioned in this datasheet belong to their respective

owners.

Tabla de contenidos

Otros manuales de Placa madre de Nuvoton

Nuvoton

Nuvoton NuMicro NuMaker-IoT-M467 Manual de usuario

Nuvoton

Nuvoton NuMicro NuMaker-IIoT-NUC980G2D Manual de usuario

Nuvoton

Nuvoton NuMicro series Manual de usuario

Nuvoton

Nuvoton NuMicro series Manual de usuario

Nuvoton

Nuvoton NuMicro M252 Series Manual de usuario

Nuvoton

Nuvoton NuMaker-M029GGC Manual de usuario

Nuvoton

Nuvoton NuMaker-M071R1E Manual de usuario

Nuvoton

Nuvoton NuMaker-HMI-M467 Manual de usuario

Nuvoton

Nuvoton NuMaker Tomato Manual de usuario

Nuvoton

Nuvoton NuMaker-M471KI Manual de usuario

Nuvoton

Nuvoton NuMaker-M253LEB Manual de usuario

Nuvoton

Nuvoton NuTiny-SDK-120 Manual de usuario

Nuvoton

Nuvoton NuMicro NuMaker-HMI-MA35D1-S1 Manual de usuario

Nuvoton

Nuvoton NuMicro NuTiny-SDK-NANO100 Manual de usuario

Nuvoton

Nuvoton NuMicro series Manual de usuario

Nuvoton

Nuvoton I94100 Series Manual de usuario

Nuvoton

Nuvoton NAU8220 Manual de usuario

Nuvoton

Nuvoton NuMaker-HMI-N9H30 Manual de usuario

Nuvoton

Nuvoton ISP-ICP Manual de usuario

Nuvoton

Nuvoton NuMicro NuMaker-M0A23EC Manual de usuario

Nuvoton

Nuvoton NuMicro NuGang Manual de usuario

Nuvoton

Nuvoton NuDesign HMI-N9H26 Manual de usuario

Nuvoton

Nuvoton NAU8223 Manual de usuario

Nuvoton

Nuvoton NuMicro series Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario