
Zero waste water tank requires a correct use and maintenance in order to grant a correct and regular operation. Following, please note
some fundamental rules to be followed in the event of operation problems:
Make sure that the tank is regularly discharged to prevent overpressure. The tank has been studied and manufactured to support
a maximum pressure of 0,2 bar.
The tank must be installed allowing inspection and the maintenance of the accessories, pipe connections, pumps etc.
Make sure that the tank is empty and clean at the end of the season and before wintering. WARNING! Be sure that the gasket
is clean and intact before installing the sender. Nuts must be hand-screwed by using a wrench at a driving torque <
2Nm, so as to avoid irretrievable damages to the tank.
Use and Maintenance
www.nuovarade.com
3