R
C
U
S
E
T
U
P
V
I
E
W
L
I
V
E
T
V
VOD
MENU
GUID
XIT
TV
AUDDVDAUX
STB
MASTER POWER
DVR
LIST
R
CH
MUTE LAST
NETWORK
MY MEDIA
INPUT
TV/VIDEO
WWW
MOVESWAPPIP
SAP
PHONE
CC
123
abcdef
4
7
5
8
0
6
9
*#
jklgh
no
tuvpqrs
DEL
wxyz
VOL
DAYPG DAY
POWER
OK
INFO
TV DVD
STB
AV SETUP
SHIFT
2ABC
5JKL
8TUV
4GHI
7PQRS
CC
OK
++
--
0_
3DEF
6MNO
9WXY
VOL PG CH
GUIDE
RECALL
MENU
BACK EXIT
INFO
1_
ADB POTENZA REMOTE CONTROL
Press AUX, DVD, AUD, TV, or STB to select a device to control.
POWER turns on or off the selected component.
These keys to control playback on your DVD player or DVR.
These keys to control playback on your DVD player or DVR.
MENU displays the settings menu. INFO displays current channel
and program information.
ARROW KEYS move the cursor in the on-screen guides.
OK makes a selection or choose options on the program guide.
GUIDE displays the program guide. EXIT will exit out of the menu,
guide or any function.
PAGE +/- scrolls through menu screens and the program guide.
DAY+/- moves a day forward (or back) on your program guide.
VOL+/- raises (or lowers) the sound volume.
CH+/- select the next higher (or lower) channel or in the guide
these buttons will allow you to page up and down.
MUTE button will shut off sound on the TV.
LAST recalls the last channel and will page back one screen in
the main menu. Pushing Last again and again will let you go
back and forth between the last two channels that were viewed.
Use the NUMBER KEY PAD (0-9) to directly select channels.
CLOSED CAPTION is for turning the closed captioning on and
off. However, this does depend on the TV, channel, and
programming for availability.
TV/VIDEO INPUT switches the mode between TV or Video.
ADB SILVER REMOTE CONTROL
Press TV, DVD, or STB to select a device to control.
Use SETUP for all programming sequences.
POWER turns on or off the selected component.
Use the NUMBER KEY PAD (0-9) to directly select channels.
MUTE button will shut off sound on the TV.
VOL+/- raises (or lowers) the sound volume.
PG+/- or CH+/- select the next higher (or lower) channel or in the
guide these buttons will allow you to page up and down.
GUIDE displays the program guide. EXIT will exit out of the menu,
guide or any function.
MENU displays the settings menu. INFO displays current channel
and program information.
ARROW KEYS move the cursor in the on-screen guides.
OK makes a selection or choose options on the program guide.
BACK recalls the last channel and will page back one screen
in the main menu. Pushing Last again and again will let you go
back and forth between the last two channels that were viewed.
EXIT directly exits menus, guides, and applications.
These keys to control playback on your DVD player or DVR.
TO PROGRAM YOUR REMOTE
1. Press and release the TV button.
2. Press and hold the RCU SETUP until the TV
button blinks twice.
3. Enter in 9-9-1 and the TV button will blink
twice.
4. Aim the remote at the TV and press and
release the POWER button.
5. Press and release the CH+ over and over
slowly until the TV turns off. (Do Not press
the CH+ again or you will advance the
code).
6. Press the POWER button to turn the TV on.
(If the TV did not turn on, press CH- once
and try again.)
7. Press the RCU SETUP button to store the
code for the TV. The TV button will blink
twice. The remote is now ready to
operate the TV.
TO TROUBLESHOOT
1. Press STB button.
2. Power cycle the set-top box.
3. Make sure there are no obstructions
between the remote and set-top box.
4. Replace the remote’s batteries.
5. Replace the remote.
TO PROGRAM YOUR REMOTE
1. Make sure your TV is on.
2. Press the TV key on the remote.
3. Press and hold down SHIFT key until the
red light blinks twice.
4. Press 9-9-1. The red light will blink twice.
5. Aim the remote at your TV and press
CH+ over and over slowly until the TV turns
off.
6. Once the TV shuts off, press SHIFT key to
save the code.
TO TROUBLESHOOT
1. Press STB button.
2. Power cycle the set-top box.
3. Make sure there are no obstructions
between the remote and set-top box.
4. Replace the remote’s batteries.
5. Replace the remote.
