NTI TRX Series Manual de usuario
Connectivity
Quick Start Guide
TRX series
TRX
TRX
Residential Condensing Gas Boiler
2
Thank you for your purchase.
You just installed an NTI boiler
designed and built to provide
a new experience in domestic
heating and hot water comfort.
Connect the product and, with
agreement from the boiler’s
owner, activate the remote
assistance service to manage
issues remotely and be notified of
errors in real time.
Connecting the boiler is quick
and easy in 4 easy steps:
1: Owner Account
Creation
2: Connect the Boiler
to the Internet
3: Get the Boiler
WiFi Serial Number
4: Contractor
Remote Connectivity
- Before the beginning of
the following procedure
check that the Internet
router where the boiler
is installed is working
correctly.
- Keep the SSID and
password of owner’s Wi-
Fi network handy.
They will be used during
conguration.
WARNING
3
1. Enter the website and create
your final user account
2. Confirm your email. All other
steps will be performed by
the Contractor
1. Owner Account Creation
www.nti.remotethermo.com
4
2. Connect the Boiler to the Internet
1. Enter connectivity menu by
pressing MENU and OK.
a) Turn ON “WIFI” :
Scroll to Wi-Fi (using the
right + and - buttons)
and press OK, then select
“ON”. Confirm by pressing
OK.
b) Open Access Point:
Scroll to “AP”, then press
OK.
“AP” will begin flashing
indicating that the Access
Point is open.
2. Connect your computer or
smartphone to the network
“Remote GW Thermo”
(unsecured)
3. Open the browser and go to
192.168.1.1
4. Choose the local Wi-Fi and
enter the password
5. The boiler is now
connecting to Internet!
Check the Wi-Fi Icon on the
display:
· If you only see the Wi-Fi
symbol on steady, it
means that the product is
online.
· If you see the Wi-Fi
symbol blinking fast, the
product is still trying to
connect, just wait few
minutes and it should
change to being on
steady.
· If you see the Wi-Fi
symbol blinking slow,
it means that the
procedure has failed.
Please, try again and
check that the Wi-Fi
password is correct.
AUTO
5
3. Connect the Boiler to the Internet
1. Enter connectivity (I-NET)
menu: press MENU (“I-NET”
will appear), then press OK.
Scroll to “SN” (using the right
+ and - buttons), then press
OK.
2. The display will show you its
12 characters serial number.
Take note of it.
3. Ask the customer for their
email they used to create
the user account.
4. You can now register
the product and start
monitoring remotely!
6
Step 4
Contractor Remote Connectivity
1. Log in to the platform www.nti.remotethermo.com with your
Contractor account. If you don’t already have an account, please
go to http://www.ntiboilers.com/remotecontractor to request
an account.
2. To register a new product, click on “New Product Registration”.
3. Enter the location of the product by entering the address or
dragging and dropping the pin in the map
4. Enter the WiFi serial number from Step 3 and confirm agreement.
7
Step 4
Contractor Remote Connectivity
5. Fill in the available data and then go to “User Data”. Enter the
Owner’s information (email address is required).
420011057700
NTI Boilers Inc.
30 Stonegate Drive Saint John,
NB E2H 0A4 Canada
Technical Assistance: 1-800-688-2575
Website: www.ntiboilers.com
Fax: 1-506-432-1135
Visit us online
Otros manuales para TRX Series
1
Otros manuales de Caldera de NTI
NTI
NTI VM110 Manual de usuario
NTI
NTI C85-340 Manual de usuario
NTI
NTI FTVN Series Manual de usuario
NTI
NTI Trinity Ti 150 Manual de servicio
NTI
NTI Trinity TFT Series Manual de usuario
NTI
NTI GF150 Manual de usuario
NTI
NTI WF200 Manual de usuario
NTI
NTI Trinity Ti 100 Manual de usuario
NTI
NTI FTG 2000 Manual de usuario
NTI
NTI FTG 600 Manual de usuario
NTI
NTI TRX150 Manual de usuario
NTI
NTI GF 200 Manual de usuario
NTI
NTI Matrix Manual de usuario
NTI
NTI Trinity TX51 Manual de usuario
NTI
NTI Tft60 - 399 Manual de usuario
NTI
NTI TRINITY Ts80 Manual de usuario
NTI
NTI TFTN Manual de usuario
NTI
NTI Trinirt TX series Manual de usuario
NTI
NTI FTG 2000 Manual de usuario
NTI
NTI FTG 600 Manual de usuario
