NSK Viva Ace Guía del usuario

VIVA ace Quick Operation Guide

1. Installing the Holder Bar and Arm ...........................2

2. Connecting the Motor, the Scaler, and the Syringe ...3

3. Installing the Vacuum ............................................4

4. Installing the Water Bottle ......................................5

5. Connecting the Foot Control ..................................6

6. Connecting the AC Power Cord..............................6

7. Check before treatment .........................................7

8. Control Panel ........................................................8

9. Liquid Crystal Display of the Control Panel ............10

10. Motor .................................................................12

11. Motor <Endodontic treatment> ...........................13

12. Ultrasonic Scaler................................................. 14

13. Light Probe ......................................................... 15

14. Vacuum..............................................................16

15. Sync Mode

(Synchro Mode)

...................................16

16. 3way Syringe...................................................... 17

17. When the Water bottle is empty or

the Vacuum bottle is filled with liquid during use .....17

18. Storage Procedure.............................................. 18

19. Troubleshooting ..................................................22

Contents

1. Installing the Holder Bar and Arm

1Pull down the Holder Bar Lock and stretch the Holder Bar

upward. The position can be set at four points.

2Press the Holder Arm Lock and turn the holder forward.

The position can be set at four points.

Holder Bar Lock Holder Arm Lock

2. Connecting the Motor, the Scaler, and the Syringe

6&$/(5 02725

Place the Motor, the Scaler and

the Syringe on the Holder.

Connect each connector with

▲mark upside. 3

MotorScaler Syringe

Insert the syringe nozzle into

the syringe.

3. Installing the Vacuum

1After checking that the Vacuum Bottle lid is tightly closed,

place the Vacuum Bottle in the Control Unit. Insert the

Vacuum Junction Hose and the Vacuum Hose to the Vacuum

Bottle Lid until they meet the end.

2Insert the Vacuum Valve to the Vacuum Hose, then insert

the Suction Tube to the Vacuum Valve.

Vacuum Junction Hose

Suction Tube

Vacuum Valve

Vacuum Hose

4. Installing the Water Bottle

1Fill with drinking water until it reaches

below the maximum line (350 ml). Then

tightly close the Water Bottle lid.

2Insert the Water Plug to the lid until hearing a clicking sound.

Maximum line

Tighten

Water Plug (OUT)

[Blue Tube]

Water Plug (IN)

[Clear Tube]

5. Connecting the Foot Control 6. Connecting the AC Power Cord

After turning the Power Switch OFF (to O side),

insert the AC Power Cord into the inlet until it

meets the end. Then insert it to the commercial

power outlet.

Insert the FC-76S Foot Control Plug (Black) into the Connector on the right.

Insert the FC-70S Foot Control Plug (White) into the Connector on the left.

Insert each plug until it meets the end.

Plug (White) Plug (Black)

FC-70S FC-76S

▲mark

Insert each plug

with ▲mark upside.

Perform the following checks before using the product on a patient to confirm that there are no abnormalities. If abnormal

vibration, noise, or overheating is detected when using or checking, stop using the product and contact your Authorized NSK

Dealer.

□There is no abnormal deformation or damage in the appearance.

□Drinking water is supplied into the Water Bottle.

□All the accessories are properly connected.

□Turn the Power Switch ON (l side ), and confirm that the product is in

the state of stand-by as defined below.

• The compressor is activated and stops after a few seconds.

• The liquid crystal display of the control panel lights and notification

sound rings.

□Start the Vacuum and confirm that it vacuums.

□Activate the Syringe for about 5 seconds by pressing both the air

button and the water button.

□Activate the motor for about 10 seconds while applying water.

Also, confirm the points below.

• Check if there is any abnormal vibration, noise or overheating.

• Check that the handpiece supplies water properly.

• Check that the light on the motor is on.

□Activate the scaler for about 10 seconds while applying water.

Also, confirm the points below.

• Check that the tip is vibrating properly.

• Check if there is any abnormal looseness, vibration, noise, or

overheating with the tip.

• Check that the tip supplies water properly.

• Check that the light on the handpiece is on.

7. Check before treatment

8. Control Panel

Selecting the suitable mode and the gear ratio (1:1,1:5)for

general cutting and tooth surface cleaning.

Selecting the suitable mode for root canal treatment.

Selecting Light Probe Mode.

Selecting Ultrasonic Scaler.

At the same time, selecting the Treatment Mode (P, E , G ).

(P :PERIO Mode, E :ENDO Mode, G :GENERAL Mode)

Switching ON/OFF of Motor and Scaler Operation.

It stores five setting programs (speed, torque, and auto reverse

setting ) during ENDO Mode.

Setting and cancellation of auto reverse function during the

ENDO Mode.

Selecting the direction of rotation during MOTOR, ENDO Mode.

Selecting ON/OFF of lighting during MOTOR and ENDO, Light

Probe Mode.

Selecting ON/OFF of Water Pouring functions during MOTOR,

ENDO, and SCALER Mode.

Selecting the Vacuum suction power in three levels.

Selecting Linking/Unlinking of the Vacuum with Motor and

Scaler.

ON/OFF of the Vacuum function.

During the ENDO Mode Torque Setting (0.3 - 3.0 N · cm)

During the SCALER Mode Power Setting (1-10)

When selecting the Light

Probe Mode

Sound Volume Setting

(High/ Low/Silent)

During the MOTOR/ENDO Mode Speed Setting

When selecting the Light

Probe Mode Light Quantity Setting

Otros manuales para Viva Ace

Tabla de contenidos

Otros manuales de Equipo dental de NSK

NSK

NSK FX204 Series Manual de usuario

NSK

NSK ENDO-MATE DT Manual de usuario

NSK

NSK s-max pico series Manual de usuario

NSK

NSK Ti-Max X95L Manual de uso y cuidado

NSK

NSK Ti-Max X65L Manual de usuario

NSK

NSK Primado2 Manual de usuario

NSK

NSK Ti-Max X Manual de usuario

NSK

NSK DynaLED Manual de usuario

NSK

NSK Ti-Max Nano Series Manual de usuario

NSK

NSK Ti-Max X10L Manual de usuario

NSK

NSK Varios 970 Manual de usuario

NSK

NSK Prophy-Mate neo Manual de usuario

NSK

NSK FPB Series Manual de usuario

NSK

NSK Ti-Max X Series Manual de usuario

NSK

NSK VarioSurg Manual de usuario

NSK

NSK G1-E Manual de usuario

NSK

NSK FX15 Manual de usuario

NSK

NSK DXP clave Manual de usuario

NSK

NSK Pana-Max PLUS PAP-MU 5H Manual de usuario

NSK

NSK Ti-Max X450L Manual de usuario

NSK

NSK iPex Manual de usuario

NSK

NSK Ti-max Z45L Manual de usuario

NSK

NSK EX Series Manual de usuario

NSK

NSK Surgic Pro2 Manual de usuario

Manuales populares de Equipo dental de otras marcas

Vatech

Vatech EzRay Air VEX-P300 Manual de usuario

KaVo

KaVo GENTLEpower LUX Contra-angle 25 LP Manual de usuario

DENTSPLY

DENTSPLY SmartLite Focus Manual de usuario

LM ProPower CombiLED Manual de usuario

Owandy Radiology

Owandy Radiology RX-AC Manual de usuario

mectron

mectron Piezosurgery Manual de usuario

Belmont

Belmont CREDIA G1 Manual de usuario

Planmeca

Planmeca Sovereign Classic Manual de usuario

Bego

Bego Fornax T Manual de usuario

Renfert

Renfert SYMPRO Guía rápida

Ateco

Ateco AT-301 Manual de usuario

Nevadent

Nevadent NZPS 3 A1 Manual de usuario

Muss Dental

Muss Dental MA 50 Manual técnico

Diplomat

Diplomat Comfort Series Manual de usuario

Dentatus

Dentatus Nyström Manual de usuario

OMS

OMS DUKE EASY Manual

OMS

OMS LINEA PATAVIUM Manual

BRYANT DENTAL

BRYANT DENTAL Ignis Gesture A-494322 Manual de usuario