NSK S-Max M65 Manual de usuario

OM-H0189E

Internal Coolant Straight Handpiece

’09.03.02 S

S-Max MS

ENGLISH

Intended to Use

The handpiece is designed only for clinical dental treatment use by qualiﬁed personnel.

CAUTION

· When operating the handpiece always consider the safety of the patient.

· Do not disassemble nor alter handpiece.

· Check for vibration, noise and overheating outside the patient's oral cavity before use. If any abnormalities are found, stop

using the handpiece immediately and contact your authorized dealer.

· Do not connect or disconnect the handpiece until the motor has completely stopped.

· Always keep bur shanks clean. Dirt or debris in a chuck could cause poor bur concentricity or low chuck retention force.

· Wear protection glass and dust mask for your health and safety.

2. Connecting / Removing the Handpiece and the Motor

(1) Connecting

Align handpiece and the motor, and insert it straight until end of the motor insertion.

(2) Removing

Hold the handpiece and the motor, and pull it out straight.

1. Features

· S-Max M65 is able to mount the Contra-Angle Bur (ISO1797-1 Type1) and Handpiece Bur.

· The patented CLEAN-HEAD system in the handpiece nose prevents invasion of saliva, blood, and other contaminants into the

handpiece.

· NSK's technology minimized vibration under cutting, and improved work accuracy.

· The handpiece is less heat generation.

· Autoclavable up to 135°C.

ENGLISH GERMAN FRENCH SPANISH ITALIAN

3. Changing Bur

(1) Handpiece Bur

Inserting the Bur

1)Turn the Bur Lock Ring in the direction of mark [O]until it clicks.

2)Insert the bur.

3)Turn the Bur Lock Ring in the direction of the mark [C]until it clicks. Make sure Black Dots align (See the picture below).

Removing the Bur

Turn the Bur Lock Ring in the direction of mark [O]until it clicks and remove the bur.

Fig. 1

Open

Bur lock ring

Black Dot

Align

ENGLISH GERMAN FRENCH SPANISH ITALIAN

Removing the Bur

Turn the Bur Lock Ring in the direction of mark [O]until it clicks and remove the bur.

CAUTION for Bur Usage

Remove the bur stopper

1)Turn the Bur Lock Ring in the direction of mark [O] until it clicks.

2)Insert the supplied Bur Stopper puller into the chuck. Pull out the Bur Stopper by

hooking at the slit of Bur Stopper. (Fig. 3)

(2)Contra-Angle Bur

Inserting the Bur

1)Turn the bur lock ring in the direction of mark [O]until it clicks.

2)Insert the supplied bur stopper into the chuck. (Fig. 2)

3)Insert the Contra-Angle Bur until it stopped.

4)Turn the Bur Lock Ring in the direction of the mark [C] until it clicks. Make sure

Black Dots align.

· Make sure that the bur is securely locked in the chuck before each use. Improper mounting of the bur could cause the bur

to spin out during rotation and endanger anyone in the vicinity.

· Mount bur stopper ﬁrmly into handpiece until it stopped. If insert wrong way, it may because difﬁcult to remove. It may

cause injure by loosen chuck and jump out of the bur.

· Do not use bent, damaged or sub-standard burs. And do not exceed the drive motor speed recommended the bur

manufacturers. This may cause shank bend or brake even within the recommended speed.

· Do not use short shank contra-angle bur. It may cause injure by loosen chuck and jump out of the bur.

· Do not rotate the motor when the bur lock ring is at OPEN position, or a bur is not mounted in the chuck and do not turn the

bur lock ring while the handpiece is rotating. It may cause the motor/handpiece disconnection or sudden heat generation.

· Bur and/or Bur Stopper should be inserted until it stopped. This will prevent “BUR WALK OUT”, and/or damage the ball

bearing.

Fig. 3

Bur Stopper

Bur

Fig. 2

5. Service

Exclusive part is necessary for cartridge exchange. If you need service for those handpieces, contact your dealer.

4. Maintenance

Refer to the Maintenance Guide OM-Z0135E.

This handpiece can be cleaned and disinfected with a

Thermo-Disinfector. This handpiece can be autoclavable up to Max.135°C.

Tabla de contenidos

Otros manuales de Equipo dental de NSK

NSK

NSK CARE 3 PLUS Manual de usuario

NSK

NSK iPex Manual de usuario

NSK

NSK Ti-Max X450L Manual de usuario

NSK

NSK Surgic Pro Series Manual de usuario

NSK

NSK Ti-Max Z Series Manual de usuario

NSK

NSK TiMax nano15LS Manual de usuario

NSK

NSK Ti-Max X Series Manual de usuario

NSK

NSK EX Series Manual de usuario

NSK

NSK Ti-Max A 500 Manual de usuario

NSK

NSK Pana-Max PLUS PAP-MU 5H Manual de usuario

NSK

NSK Viva Ace Manual de usuario

NSK

NSK FX204 Series Manual de usuario

NSK

NSK Presto II Manual de usuario

NSK

NSK NAC-Y Manual de usuario

NSK

NSK M500L Manual de usuario

NSK

NSK AS2000 M4 Manual de usuario

NSK

NSK DXP clave Manual de usuario

NSK

NSK Ti-max Z45L Manual de usuario

NSK

NSK FX65 Manual de usuario

NSK

NSK PER-PTL-P Manual de usuario

NSK

NSK TiMax Z10L Manual de usuario

NSK

NSK iPexII Manual de usuario

NSK

NSK S-Max PICO Manual de usuario

NSK

NSK Endo-Mate TC2 Manual de usuario

Manuales populares de Equipo dental de otras marcas

Vatech

Vatech EzRay Air VEX-P300 Manual de usuario

KaVo

KaVo GENTLEpower LUX Contra-angle 25 LP Manual de usuario

DENTSPLY

DENTSPLY SmartLite Focus Manual de usuario

LM ProPower CombiLED Manual de usuario

Owandy Radiology

Owandy Radiology RX-AC Manual de usuario

mectron

mectron Piezosurgery Manual de usuario

Belmont

Belmont CREDIA G1 Manual de usuario

Planmeca

Planmeca Sovereign Classic Manual de usuario

Bego

Bego Fornax T Manual de usuario

Renfert

Renfert SYMPRO Guía rápida

Ateco

Ateco AT-301 Manual de usuario

Nevadent

Nevadent NZPS 3 A1 Manual de usuario

Muss Dental

Muss Dental MA 50 Manual técnico

Diplomat

Diplomat Comfort Series Manual de usuario

Dentatus

Dentatus Nyström Manual de usuario

OMS

OMS DUKE EASY Manual

OMS

OMS LINEA PATAVIUM Manual

BRYANT DENTAL

BRYANT DENTAL Ignis Gesture A-494322 Manual de usuario