Notifier IFS-2600 Manual técnico

ECN11

1. Product Overview

IFS-2600 Termination Board (TB) is the main termination board, where connections from all other devices in the

panel and thefield are terminated. The Power Supply Interface board (PSI) is mounted directly on top of the spacers

provided in the Termination Board which is available as a separate kit (#ASY-02-021). Both these boards are

mounted on a metal work chassis, which in turn is assembled in the IFS-2600 base panel. A power supply unit (PSU)

is mountedto the chassis, which powers the panel.

Figure 1, IFS-2600 Chassis

This is the IFS-2600 CHS chassis (#MW-02-012) onto which Termination board (#PCA-01-048) will be

assembled.

2. Installation

WARNING:

Installation should be performed by competent persons in accordance with the

relevant standards as required for the installation. Honeywell Ltd accepts absolutely no liability

for the suitability, settings or connections done within an installation.

1. Attach the male end of four M3x20 M/F tapped spacers (#11164) to the four slots provided on termination

board and secure it using four M3 flanged nuts (#10313) as shown in Figure 2.

Figure 2, IFS-2600 Termination Board (NI-2025-01 PCB)

9 Columbia Way

Baulkham Hills, NSW 2153

PH 02-9894-1444 • FAX 02-9894-4193

www.notifier.com.au

Notifier IFS-2600 Termination Board (TB)

Product Installation Document

DOC

037

ECN11

/2011

Rev:

1.0

IFS-2600 Chassis

(#MW-02-012)

Studs to secure

Termination

Board

M3 Flanged Nuts (#10313)

to Male end of

Spacer (#11164)

ECN11

2. Attach the Termination board (#PCA-01-048) to the four Studs on the IFS-2600 chassis and secure it using

four Philips head sems screws (#2316) as shown in figure 3.

Figure 3, Termination Board Secured to IFS-2600 Chassis

3. Place the Power Supply Interface (PSI) board (#PCA-01-045) on the spacers (provided on the termination

board) and secure it using four Philips head sems screws (#2316) as shown in figure 4.

Note: This assembly is termed as Top Hat Assembly, which will be secured to the Base panel.

Figure 4, PSI Board attached to Termination Board

4. If the IFS-2600 Top Hat Assembly was removed from the panel, re-attach it to the top location of IFS-2600

Base panel and secure it using four M4 flanged nuts (GEN-01-008) as shown in figure 5.

Figure 5, IFS-2600 TB on Chassis installed in Base Panel

ECN11

Figure 6, Termination Board, PSI & PSU Connection Diagram

3. Components

The IFS-2600 TB kit assembly contains the following components, as outlined in Table 1.

Part No. Description Qty

2316 M3 x 8 Philips Head Sems Screws 8

10313 M3 Flanged Nuts 4

11164 M3 x 20 M/F Hexagonal Tapped Spacer 4

11877 Cable - 4 way Power PSI for IFS-2600 – 150mm (DWG0058) 1

11878 PSI-FIM Ribbon Cable10 Way – 150mm (DWG0059) 1

CA-01-005 24V Cable – PSI to PSU – 4 Way, Red+Black 550mm (DWG0304) 1

PCA-01-048 Termination Board to Suit IFS-2600, NI-2025-01 PCB 1

Table 1: Components

4. Supplemental Documentation

For

information

on... Refer to... Part No.

IFS-2600 TB IFS-2600 Installation, Programming & Operations Manual DOC-01-009

Table 2: Supplemental Documentation

Otros manuales para IFS-2600

Tabla de contenidos

Otros manuales de Alarma de incendios de Notifier

Notifier

Notifier AM2020 Manual de usuario

Notifier

Notifier 1010 Manual de usuario

Notifier

Notifier UZC-256 Manual de usuario

Notifier

Notifier UniNet 2000 AFP-300 NION Manual de usuario

Notifier

Notifier VGM NION UniNet 2000 Manual de usuario

Notifier

Notifier ACS Series Manual de usuario

Notifier

Notifier 002-439 Manual de instrucciones

Notifier

Notifier ID50 SERIES Manual de instrucciones

Notifier

Notifier AVL-1 Hoja de especificaciones

Notifier

Notifier RP-1001 Manual de usuario

Notifier

Notifier NBG-12LO Manual de usuario

Notifier

Notifier NFS-3030/E Manual del propietario

Notifier

Notifier UZC-256 Manual de usuario

Notifier

Notifier NBG-12LOB Manual de usuario

Notifier

Notifier UniNet 2000 Simplex 4010 NION Manual de usuario

Notifier

Notifier AFC-600 Manual de usuario

Notifier

Notifier ONYX Series Manual de usuario

Notifier

Notifier AFP-200 Manual de usuario

Notifier

Notifier ID50 SERIES Manual de usuario

Notifier

Notifier LCD-80F Manual de usuario

Notifier

Notifier IFS-2600 Manual de instrucciones

Notifier

Notifier NFS-640 Manual del propietario

Notifier

Notifier AM2020 Manual de usuario

Notifier

Notifier INERTIA-2464/64 Manual de usuario

Manuales populares de Alarma de incendios de otras marcas

Zeta Alarm Systems

Zeta Alarm Systems INFINITY ID2 Manual de usuario

System Sensor

System Sensor 22051TLE-RF-26 Manual de usuario

Pittway

Pittway Notifier AM2020 Manual de usuario

Ampac

Ampac ZoneSense Manual de usuario

Kidde

Kidde VM-1 Manual del producto

LST

LST SIM016-3 Manual de usuario

Fireboy- Xintex

Fireboy- Xintex FBD-MZ Instrucciones originales

bolid

bolid S2000-IP-03 Manual de usuario

GST

GST DI-9204 Manual de usuario

E2S

E2S BExTBG05D Manual de usuario

Fire-Lite Alarms

Fire-Lite Alarms MS-2 Manual de usuario

Siemens

Siemens FDOOT221 Manual de usuario

hyfire

hyfire HY5000 Series Manual de usuario

FlameStop

FlameStop PFSIFP8 Manual de usuario

Radionics

Radionics Radionics 9124 Manual de usuario

UniPOS

UniPOS FD 7120 Manual de usuario

FIREWOLF

FIREWOLF FW-C01224 Manual de usuario

Siemens

Siemens MH-5 Series Manual de servicio