SAFETY FIRST
If you are unfamiliar with any aspect of this manual, it is advised that you take your SYNERGY STEP
and this manual to a local bike shop for inspection, assembly and instructions.
➢It is extremely important that you follow the safety guidelines contained in this manual in order to
ensure maximum safety for you as well as maximum durability of youSYNERGY STEP.
➢Before you ride your SYNERGY STEP for the first time, please be sure bike has been correctly
assembled. You will find step by step instructions in this manual. If for any reason you are
uncertain about your bike's assembly please bring it to your nearest bike shop.
➢Key assembly steps that must be completed with absolute certainty (including secure fastening) are
pedals, saddle height, handlebars (both rotation and height) and wheels
➢Please ensure all safety latches, including quick releases and rings, are locked in place and snug
without any movement.
➢Please ensure all bolts (including the front/rear wheels, saddle bolt and brake rotors) are properly
tightened. Certain components must be tightened to exact specifications using a torque wrench for
safety assurance. Fixed front wheel axle nut: 28-32Nm, Fixed rear wheel axle nut: 30-35Nm,
Handlebar bolts: 6-8Nm, Handlebar stem bolt: 13-15Nm, Bar end bolts: 4-5Nm, Saddle bolt:
22Nm.
➢Test your brakes prior to using the SYNERGY STEP every time. In wet or icy conditions, use extra
caution.
➢Check your tire pressures frequently. They should be pumped to 1.4 bar (20 psi). Low tire
pressures could result in damage to the tires and rims.
➢Always wear a helmet when riding any bike or e-bike.
➢Please observe all traffic regulations and other applicable laws.
➢Don’t drink and ride. Even a small amount of alcohol can impair your judgment and lower your
ability to remain safe.
➢SYNERGY STEP are not toys. All riders must be at least 16 years old.
➢The SYNERGY STEP is meant to be ridden by a single person. The total recommended weight of
a rider, including all items such as a backpack,is 150 kg (330 1bs).
