Nordic Eye Contrast HD Manual de usuario
Nordiceye
ContrastHD
NordiceyeContrastV11115‐1
Congratulation to your choice of magnifying
aid, we hope this will help you in your
everyday life.
Contents
Introduction ……………………………………….page 2
System information……………………………… page 3
Unpacking and assembly………………………..page 4
Functions and setting……………………….……page 10
Safety information………………………………...page 14
Maintenance……………………………………....page 15
Technical data…………………………………….page 17
1
Introduction to Contrast.
Contrast is a standalone magnifying camera system to be used
by people with low vision.
The camera system has functions such as Autofocus, many false
color options, High contrast mode, can be mixed with PC and
also with Distance camera if needed.
To a Contrast it is possible to choose any monitor that has a DVI,
VGA or HDMI input.
When connecting to VGA monitor an adapter is needed
(Included) also when using a monitor with HDMI an adapter is
needed (Not included).
2
System Information
Contrast is a stand-alone camera system that can create an
ergonomic environment in school, at home or in a working
situation.
Assembly.
Read more under assembly.
Individual assembly.
Contrast can easily be assembled to suit different people with
different needs or length.
Accessories.
To Contrast there is a lot of options to make the everyday life
better: arms for monitors, table, etc.
Contact your supplier.
Warranty.
Contrast delivered with 3 years warranty.
TCO .
To Contrast we suggest to use monitors that have the TCO-03
labeling. This labeling tells about the radiation.
More information about TCO can be found at
www.tcodevelopment.com
3
Part Name Part No#
Camera unit 40110010
Remote control 9540003
Powersupply 9540002
Contrast is delivered with the following items.
4
Unpacking and assembly
XY table
9540001
4
Included are also a manual, cables and adapters.
At arrival, check that the box has no visible damage.
If so, report to transport company.
Packaging.
Packing Materials (EPP)
Carton (CORRUGATED PAPER)
Wrap around bag ( LDPE4)
Contact your community to recycle the packaging
material in a proper way.
5
Installation
It is important that you sit properly at the working table. A
comfortable chair is to prefer to be able to avoid stress on
neck and shoulders and to make it possible to work during a
longer time. Notice the points below that can be useful to
think about.
•The chair shall be near the working table. Preferable is
a chair that can be adjusted in many ways.
•The chair seat shall be adjusted so that the legs are in a
angle and the feet shall be resting on the floor.
•The Desk shall be in a height so that the underarms can
rest horizontally.
•The Monitor shall be in front of the eyes and a height
and angle under eyesight.
•Shade of daylight, lights in roof, windows can give
reflexes into the screen or direct in the eyes.
•Alternate positions, if possible from sitting to standing.
6
7
Assembly
Place the camera unit on proper location.
Place the XY table if you prefer to use it at the same
location as the camera unit.
Connect the monitor cable from the monitor to the camera
unit.
Connect the power cable from power supply to a power
outlet and connect the dc cable from the power supply to
power connector at the camera unit.
You can now start the system by pressing the button at the
top of the camera unit.
Remote control
8
Functions and settings
Z+ ,Zoom in ( increase magnification)
Z-, Zoom out (decreas magnification)
XIncrease brightness in colormode or contrast in
highcontrastmode.
WDecrease brightness in colormode or contrast in
highcontrastmode.
MODE , change between fullcolor mode or high contrastmode //
false colors.
Press MODE for 5 sec and a menu will appear with more
choices.
FUNC, Shows reference line or give split picture with PC or Mac
if computer is connected.
Keep FUNC, pressed for 5 sec, and you can change how much
of the Camera / PC you would like to show , do the adjustment
with the Z+ or Z- buttons and the X,Wbuttons.
A quick press at FUNCwill leave this option.
If no PC or Mac is connected it will instead move the ref line-
9
Keep the OK button pressed until a signal beeps and the
actual magnification is stored into a memory. A quick
press on the OK button will first show an overview picture ,
second press will go the magnification stored.
Tabla de contenidos
Otros manuales de Lupa de Nordic Eye
