NORBAIN XM17HD-LED Manual de usuario
USER
’
S
MANUAL
TFT LCD MONITOR
MODEL: XM17HD-LED/ XM19HD-LED
2
TABLE OF CONTENTS
CE information ------------------------------------------------------------------------ 3
Safety Precautions ------------------------------------------------------------------- 3
1.
Scope -------------------------------------------------------------------------------------- 5
2.
Functional specification ------------------------------------------------------------- 5
3.
Controls and indicators -------------------------------------------------------------- 7
4.
OSD Menu -------------------------------------------------------------------------------- 8
5.
Regulatory Agency ------------------------------------------------------------------- 19
6.
Reliability ------------------------------------------------------------------------------ 19
7.
Mechanical ------------------------------------------------------------------------------ 20
3
CE INFORMATION
The product must be installed according to the currently valid installation regulations for
EMC to guarantee the designed use and to prevent EMC problems.
The device supplied with this manual is according to the EC, EMC Directive,
2004/108/EC, LVD 2006/95/EC and RoHS 2011/65/CE
SAFETY PRECAUTIONS
1. Do not modify the three-prong grounding type monitor power plug in any way.
2. Operate this unit only from the type of power source indicated on the label.
3. Do not block or cover ventilation openings on the back or bottom of the monitor
cabinet.
4. Do not place this monitor near a radiator or heating vent.
5. Do not push objects of any kind through cabinet openings. This may result in fire or
electrical shock.
6. Before adding attachments always ask a service technician to perform routine safety
tests to determine that equipment is in safe operating condition. Ground potential tests
should be part of the routine safety check made by the service technician.
7. Do not place monitor on an unstable cart, stand, or shelf where it may fall and injure
personnel or damage equipment.
8. Route power cords so that they cannot be walked upon or tripped over. Do not allow
anything to rest on the power cord.
9. Do not install monitor in wet areas, or where it may be exposed to rain or water. Do not
spill liquid of any kind on the unit.
10.Unplug the power cord from the unit before cleaning the display. Use only a damp cloth.
Do not use alcohol, spirits, or ammonia to clean the display. DO NOT ATTEMPT TO
CLEAN THE INTERIOR OF THIS UNIT- THIS ACTION MUST BE PERFORMED BY
THE SERVICE TECHNICIAN AS REQUIRED DURING NORMAL MAINTENANCE.
11.Refer all servicing to qualified service personnel. REMOVAL OF BACK COVER BY
UNAUTHORIZED PERSONNEL MAY EXPOSE THE USER TO DANGEROUS
VOLTAGES OR OTHER HAZARDS.
12.Unplug the unit immediately and notify the service technician.
A. If liquid has been spilled into the display or the display has been exposed to rain or
water.
B. If the unit has been dropped or the cabinet damaged.
C. If fuses continue to blow.
D. If the power cord is damaged or frayed.
E. If a distinct change from normal operation is apparent.
4
When replacement parts are required, be sure that the service technician uses
components specified by the manufacturer which have the same characteristics as the
original parts. UNAUTHORIZED SUBSTITUTIONS MAY RESULT IN FIRE, ELECTRICAL
SHOCK OR OTHER HAZARDS.
Upon completion of any service or repairs, ask the technician to perform safety checks to
determine that the equipment is in safe operating condition.
WARNING:
＊
＊＊
＊SERIOUS SHOCK HAZARDS EXIST WITHIN THE COVERS OF THIS MONITOR. DO
NOT OPEN THE COVERS UNDER ANY CIRCUMSTANCES,
THERE ARE NO USER SERVICEABLE COMPONENTS INSIDE
＊
＊＊
＊CAUTION - USE RECOMMENDED MOUNTING APPARATUS TO AVOID RISK OF
INJURY
5
1. Scope
This specification is used to define the performance of XM xx HD series color TFT
LCD (LED Backlit) monitor. This system supports both video input and PC input. In video
input mode, the system can automatically detect PAL or NTSC signals. In PC mode, this
system can support up to 1280 x 1024 VESA standard.
This system provides frame buffer style de-interlace mechanism and 3D comb filter to
implement the high quality video pictures. The user friendly OSD menu is also provided to
make this system easy to operate.
2 Functional Specifications
2.1 Power Supply
The power supply spec is listed below,
AC INPUT
* AC power input range: 100 – 240 V, 50-60Hz, 1.5A max.
* Power efficiency: ≥80%
DC INPUT
* DC JACK power input: 12V +/-10% 3A max.
2.2 Video Characteristics
Composite Video (CVBS): 1.0 Vp-p (0.5 – 1.5Vpp), Automatic switching from 75 Ω
unbalanced termination to Hi-Z with loop-through operation.
Y/C (S-video): 1.0 Vp-p (0.5 – 1.5Vpp), Automatic switching from 75 Ωunbalanced
termination to Hi-Z with loop-through operation.
2.3 VGA Input
Analog RGB: 0.707 Vrms.
Support VESA Standard Timing
2.4 HDMI Input
HDMI 1.3 Compatible Interface
HDMI Timing Modes
480i / 480p
576i / 576p
720p
1080i / 1080p
6
2.5 Audio Input
Signal Level: 1.0 Vrms
2.6 Environmental
Temperature
Operating: 0
0
C to +40
0
C
Storage: -20
0
C to +60
0
C
Humidity
Operating: 10% to 85% (non-condensing)
Storage: 10% to 95% (non-condensing)
2.7 EDID
This series of displays support EDID, but does not support DDC2B function.
2.8 Connectors
VIDEO
A/B AUDIO: Stereo Phone Jack x2, OUT x1, IN x1
C/D CVBS 1: BNC x2, OUT x1, IN x1
E/F CVBS 2: BNC x2, OUT x1, IN x1
G S-VIDEO (Y/C): Mini-DIN 4 pins, input only
H VGA: D-SUB 15 pins connector
I HDMI: HDMI connector
J DC JACK: DC12V in, 5.5Ø/ 2.5Ø
Set up sequence:
1. Make sure the power of PC and/or Video source were turned off.
2. Plug the power adapter, Video signal and VGA cable to monitor.
3. Turns the PC and/or Video source power on.
4. Plug the AC power cord onto power adapter.
(Use reverse sequence to teardown the monitor)
7
3. Controls and indicators
A. “i” Channel button
Press the button to select input signal.
B. “-“ / “+” buttons
Press the buttons to scrolling the cursor to desired function.
Press the buttons to adjust the value of selected function in sub OSD menu.
C. “M” Menu button
Press the button to show the OSD main menu.
As a confirmation key during the OSD operation.
D. POWER LED Indication
Green - Power on
Orange - Power off (Stand by)
Flash Orange - Sleep mode (PC mode only)
Flash Green - Freeze status
E. POWER button
Press the button to turn ON or turn OFF the monitor.
8
4. OSD Menu
Hot key
：
VOLUME：Press -button to enter the function and press -/ +buttons to adjust the
volume value, then press MENU button to exit OSD menu..
FREEZE：Press +button to enter the function and press any button to release the
function.
CHANNEL：Press CHANNEL button to enter the function and press CHANNEL
button or -/ +buttons to select the highlight item, the press MENU button to
enter.
KEY LOCK：Press MENU button for 10 seconds to enable Key Lock
KEY UN-LOCK：Press MENU button for 10 seconds to disable Key Lock
9
PC mode
：
MAIN ADJUST, COLOR ADJUST, IMAGE ADJUST (VGA only), INFORMATION,
LANGUAGE, SETUP MENU, RECALL, AUDIO CONTROL, EXIT
Press MENU button to enable MAIN MENU.
Press -/ +buttons to select an item, then Press MENU button to enter the function or
next sub menu.
10
MAIN ADJUST：
1. Press -/ +buttons to select an item, then press MENU button to
Enter adjust item or function.
2. Press -/ +buttons to adjust the value, then press MENU button to
Exit adjusts.
VIVID MODE：Select the VIVID MODE (0~3 and USER)
0: NORMAL, 1: TEXT, 2: PHOTO, 3: MOVIE
BRIGHTNESS：Adjust the brightness value
CONTRAST：Adjust the contrast value
BACKLIGHT：Adjust the backlight value
DLC：Dynamic Luminance Control - DISABLE / ENABLE
VOLUME：Adjust the volume value
EXIT：Press MENU button to return to the main menu
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
