Norac UC4+ Manual de usuario

PLA MAP II 3250 F

Installation Manual

Spray Height Controller

Improving the competitiveness o Industry and Agriculture

through Precision Measurement

Printed in Canada

Reorder P/N: UC4+BC+PL1-INST Rev B (PLA MAP II 3250 F)

NOTICE

NORAC Systems International Inc. reserves the right to improve products and their specifications without notice and without the

requirement to update products sold previously. Every effort has been made to ensure the accuracy of the information contained

in this manual. The technical information in this manual was reviewed at the time of approval for publication.

TABLE OF CONTENTS

INTRODUCTION..................................................................................................................................1

GENERAL SYSTEM DESCRIPTION ..................................................................................................2

PARTS LISTS ......................................................................................................................................4

INSTALLATION PROCEDURE...........................................................................................................8

4.1

WING SENSOR INSTALLATION.........................................................................................................8

4.2

MAIN LIFT SENSOR INSTALLATION......................................................................................11

4.3

ROLL SENSOR INSTALLATION.......................................................................................................12

4.3.1

Boom Frame Roll Sensor Mounting......................................................................................13

4.3.2

Chassis Roll Sensor Mounting..............................................................................................14

4.4

HYDRAULIC INSTALLATION ...........................................................................................................15

4.4.1

Valve Assembly.....................................................................................................................15

4.4.2

Valve Mounting......................................................................................................................15

4.4.3

Hydraulic Plumbing ...............................................................................................................16

4.5

ELECTRICAL INSTALLATION..........................................................................................................17

4.6

COMPLETING THE INSTALLATION ..................................................................................................21

ELECTRICAL REFERENCE – CABLE DRAWINGS........................................................................22

5.1

ITEM C02: 44668 –SENSOR BRANCH CABLE...............................................................................22

5.2

ITEM C02B: 44664 -CABLE UC4 CAN NODE DUAL.....................................................................22

5.3

ITEM C03: 44656 –CABLE VALVE VARIABLE RATE......................................................................23

5.4

ITEM C10: 44650-39 –CABLE POWER GENERIC SELF-PROPELLED..............................................24

5.5

ITEM C11: 44651-03 –CABLE EXTENSION CABLE VALVE GENERIC..............................................25

5.6

ITEM C14: 44658-28 –CABLE INTERFACE UC4 BC C14 POWER PIGTAIL.....................................26

5.7

ITEM C12: 44658-38 –CABLE INTERFACE UC4 BC C12 DIN ALL...............................................27

5.8

ITEM C16: 44658-39 –CABLE INTERFACE UC4 BC C16 DIN.......................................................28

APPENDIX A – VALVE CONNECTOR CHANGE.............................................................................29

INTRODUCTION

Congratulations on your purchase of the NORAC UC4+ Spray Height Controller. This system is

manufactured with top quality components and is engineered using the latest technology to

provide operating features and reliability unmatched for years to come.

When properly used the system can provide protection from sprayer boom damage, improve

sprayer efficiency, and ensure chemicals are applied correctly.

Please take the time to read this manual completely before attempting to install the system. A

thorough understanding of this manual will ensure that you receive the maximum benefit from

the system.

YOUR INPUT CAN HELP MAKE US BETTER! If you find issues or have suggestions

regarding the parts list or the installation procedure, please don’t hesitate to contact us via

the information given below:

Phone: +1-306-664-6711 all other regions

E-mail: [email protected]

Website: www.norac.ca

GENERAL SYSTEM DESCRIPTION

Figure 1 depicts the general system layout of the UC4+ Spray Height Control system.

Figure 1 – System Components and General Location

NOTICE:

Every effort has been made to ensure the

accuracy of the information contained in this

manual. All parts supplied are selected

specially to fit the sprayer to facilitate a

complete installation. However, NORAC

cannot guarantee all parts fit as intended due

to the variations of the sprayer by the

manufacturer. Please read this manual in

its entirety before attempting installation.

ATTENTION:

When installing the UC4+ Spray Height

Control system please be aware that at a

point in the installation your sprayer booms

will be inoperative until the installation is

complete. Any installation procedure

requiring boom movement will need to be

done first. Once the hydraulics have been

disconnected you must complete the

electrical installation before the booms

become operative.

PARTS LISTS

The parts that come with your UC4+ Sprayer Boom System are listed in Table 1. The item number on

the left side of this table references each part.

Please ensure that all parts in your kit are present before proceeding with your installation.

Table 1 – PLA MAP II 3250 F Sprayer Boom Control System Parts (Rev A)

Item Part Number Name Quantity

B05 44706-01 KIT CABLE TIE BLACK 10 PCS 21 IN 150 PCS 7 5 IN 1

B10 44700-06 BRACKET VALVE MOUNTING STD 1

B11 44743 MOUNTING BRACKET MAIN LIFT SENSOR UC4 PLUS 1

B13 44728 MOUNTING BRACKET COMPLETE UC4 BREAKAWAY EXTENDED 2

B14 44724 BRACKET BREAKAWAY SPACER 2IN WITH BOLTS 2

C02 44668 CABLE UC3 SENSOR BRANCH 1 AMP RECEPT 3 AMP PLUG BC 1

C02B 44664 CABLE UC4 CAN NODE DUAL 1

C03 44656D CABLE VALVE VARIABLE RATE DT 1

C10 44650-39 CABLE POWER GENERIC SELF-PROPELLED 1

C11 44651-03 CABLE EXTENSION VALVE GENERIC 1

C12 44658-38 CABLE INTERFACE UC4 BC C12 DIN ALL 1

C14 44658-28 CABLE INTERFACE UC4 BC C14 POWER PIGTAIL 1

C16 44658-39 CABLE INTERFACE UC4 BC C16 DIN 1

E01 4461BC+ UC4 PLUS BOOM CONTROL PANEL 1

E02 44631 UC4 ULTRASOUND SENSOR 3

E03 44641 UC4 PLUS ROLL SENSOR W TEMPERATURE PROBE 1

E04 44642 UC4 PLUS ROLL SENSOR 1

H01 44863-01 HOSE ASSEMBLY 122R2-06 36 IN L 6FJX 6FJX 2

H02 44862-14 HOSE ASSEMBLY 122R2-04 36 IN L 4FJX 4FJX 2

H20 44865-45 HYDRAULICS FITTING KIT - PL1 1

M01 UC4+BC+PL1-INST MANUAL INSTALLATION UC4+ PLA MAP 1

M01A 446BC+MAN6-1 MANUAL UC4+ BOOM CONTROL 2008 OPERATORS SMALL BOOKLET 1

M01B 446BC+MAN6-2 MANUAL UC4+ BOOM CONTROL 2008 QUICK REFERENCE SMALL BOOKLET 1

V01 44933D VALVE BLOCK ASSEM UC5-BC 2-STATION CC/LS VARIABLE RATE DT CONNECTORS 1

Table 2 – 44865-45 (Rev A) - Hydraulics Fittings Kit Details

Item Part Number Name Quantity

Picture

F01 103719 MALE ADAPTER - 6MB 4MJ 4

F02 104704 FEMALE JIC CAP - 4FJCN 4

F03 103194 MALE ADAPTER - 6MJ 8MB 2

F04 103993 MALE ADAPTER - 4MJ 4MJ 2

F07 103312 MALE ADAPTER - 6MB 6MJ 2

F08 44928 ORIFICE INSERT 047 IN ONE WAY 4

6 M B - 6 M OR X 90

SIZE IN

1/16

TH'S

GENDER: MALE

OR FEMALE

ANGLE

SWIVEL

TYPE

GENDER

SIZE

TYPE:

B - ORB

J - JIC

OR - FLAT

FACE

P - PIPE

Fitting Name

Example:

The parts that come with your UC4 System are shown below in their general installation

configuration.

Figure 2 – UC4+ Spray Height Control system Components

*If your valve connectors or cables appear different than shown, refer to Appendix A for more

details.

Figure 3 - Hydraulic Plumbing Schematic

INSTALLATION PROCEDURE

4.1 W

ING

ENSOR

NSTALLATION

1. Assemble the Breakaway Sensor

Mounting Brackets (B11) as show in

Figure 4 and Figure 5.

Figure 4 – Breakaway Sensor Bracket

Exploded View

Figure 5 – Breakaway Sensor Mounting

Bracket Assembly

To assemble the breakaway sensor

bracket:

a) Assemble the bolt and nut into the

collar.

b) Grease the bottom edge of the collar

and the angled tube of the base.

c) Place the collar onto the angled tube

of the mounting base.

d) Install the spring between the collar

and the upper ring of the base.

e) Insert tube through assembly and

tighten the collar

2. Mount the sensor bracket onto the boom.

If possible, mount the sensor

brackets while the booms are in

their folded position to ensure that

they will not interfere with

anything when the boom is folded

for transport.

3. The mounting brackets can be installed

with the mounting base behind (Figure

9) or in front of the tube (Figure 7).

4. Use the sensor bracket breakaway spacer

(B14) to mount the sensor bracket

(Figure 6).

Figure 6 - Mounting the Sensor

Breakaway Bracket with spacer

Breakway

Bracket

Spacer

Otros manuales para UC4+

Tabla de contenidos

Otros manuales de Maquinaria agrícola de Norac

Norac

Norac UC5 Topcon X30 Manual de usuario

Norac

Norac UCB Sx275 Manual de usuario

Norac

Norac UC5 Topcon X30 Manual de usuario

Norac

Norac UC5 Topcon X30 Manual de usuario

Norac

Norac UC4+ Manual de usuario

Norac

Norac UC4.5 Manual de usuario

Norac

Norac UC4 Total Control Manual de usuario

Norac

Norac UC4+ Manual de usuario

Norac

Norac UC4.5 Manual de usuario

Norac

Norac UC5 Sx275 Manual de usuario

Manuales populares de Maquinaria agrícola de otras marcas

GSi

GSi PNEG-2314 Manual de usuario

Checchi & Magli

Checchi & Magli TEXDRIVE Manual de usuario

Amazone

Amazone Cenius 4003-2TX Manual de usuario

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Manual de usuario

Cima

Cima BLITZ Instrucciones de funcionamiento y mantenimiento

Amazone

Amazone CombiDisc 3000 Instrucciones de instalación

HE-VA

HE-VA Disc-Roller XL Contour Manual de usuario

AGT

AGT AGT-SSFM Manual de usuario

Milestone

Milestone 72-84 Manual de usuario

KUHN

KUHN Hector 3000 Manual de usuario

Krone

Krone X-Disc 6200 Manual de usuario

Eliet

Eliet DZC450 Manual de usuario

Taarup

Taarup BIO+ B4000 Manual de usuario

Garland

Garland SHAKER 310 DPG Manual de usuario

stable comfort

stable comfort StableWall System Manual de usuario

Raven

Raven AccuBoom Manual de usuario

International

International 710 Manual de usuario

Ashland

Ashland HDW-3217-14 Manual de usuario