Nokoser TC-X Manual de usuario
INSTRUCTION MANUAL
Intelligent Touching Color Screen Charger & Tester
TC-X
INDEX
Introduction……………………………..……………………………1
Features…………………………………………………...…………1
Specifications………………….………………………….…………2
Main Interface Specification……….……………………….………3
Settings Interface Specification……………………………………5
Internal Resistance Test Interface…………………………………7
Operation Method………………………………………...…………8
Battery Activation…………………………………..………………10
Precautions………………………………………………...……… 11
Warranty Service……………………..……………………………12
产品简述…………………………...……………………….………13
产品特性………………………….………………………..…….…13
产品参数………………….………………….……….…….………14
主界面说明……….……………………………………….……..…15
设置界面说明………………………………………….…...………17
内阻界面说明………………………………………...………….…18
操作方法…………………………………………………...…….…20
激活电池功能…………………………………...………………….22
注意事项………………………………………….…………………22
售后服务……………………..………………………..….………...23
INTRODUCTION
The NOKOSER TC-X is a universal intelligent touching color screen tester with
charging and discharging functions compatible with almost all rechargeable
batteries on the market, thus eliminating the need to own several chargers. The
TC-X automatically identify 3.7V Li-ion, Ni-MH and Ni-CD batteries and
through clicking selection is also capable of charging LiFePO4 and 3.8V Li-ion
batteries. Intelligent circuitry selects the optimal charging mode (CC, CV and
dV/dt) for a given battery and each of the TC-X’s four microcomputer-controlled
charging slots then monitor and charger the battery independently. Furthermore,
an integrated digital touching color screen clearly displays all charging and
discharging parameters and progress while an intelligent automatic power-off
function terminates current when charging is completed.
The NOKOSER TC-X: the world’s most advanced fully-automatic touching color
screen tester with charging and discharging functions.
FEATURES
Microcomputer IC controls charging process
CC/CV/Trickle charging, to make sure the battery is full charged and won’t
be over charged
Four slots control independently by touching
Mixed charging mode
Color LCD instantly shows the charging process, battery voltage, current,
time, capacity, charge curve, discharge curve and internal resistance
Applicable batteries: Li-ion3.7V, Li-ion3.8V, LiFePO4, Ni-MH/CD
cylindrical chargeable batteries (Diameter: below 32mm, height:
34-73mm)
Input: AC100V-240V/ DC12V or DC12V 5A vehicle input
Charging, Discharging, Capacity Test and Internal resistance
Four types of charging current: 0.5A, 1.0A, 1.5A, 2.0A (According to
different capacity); discharging current: 0.5A
Reverse connection protection: When the battery is reversed, the
corresponding battery icon shows “Battery Error”.
Short circuit protection: When the battery is short circuit, the corresponding
battery icon shows “Battery Error”.
Activate automatically for Li-ion batteries with protection board, which are
instantaneous short circuit.
Intelligent temperature control:
The built-in cooling fan will be automatically open, when the internal
temperature of the machine rises to 60 degrees (Celsius) according to two
temperature sensors. When the temperature drops to 40 degrees (Celsius),
it stops automatically to ensure that the charger has a good working
condition. Avoid high capacity batteries overheated during the charge and
discharge process, causing spontaneous combustion or ignition.
Certified by ROHS, CE and FCC
SPECIFICATIONS
Input: AC 100-240V 50/60Hz, DC 12V 5A
Charging Cut-off Voltage:
4.35V±0.02V / 4.2V±0.02V / 3.6V±0.02V / 1.43V±0.02V
Charging Current:
500mA±30mA*4 / 1000mA±50mA*4 / 1500mA±60mA*4 / 2000mA ±80mA*4
Discharge Cut-off Voltage: 2.85±0.02V / 2.75±0.02V / 2.0±0.02V / 0.90±0.02V
Discharging Current: 0.5A
Compatible with:
3.7V Li-ion / 3.8V Li-ion / LiFePO4: 32670, 26670, 26650, 22650, 21700, 20700,
18650, 18490, 17500, 18350, 14500, 10440, 16340(RCR123)
Ni-MH / Ni-Cd: A, AA, AAA, SC, C, D
Dimensions: 177mm×133mm×56mm
Weight: 450g (Without adaptor and test pens)
MAIN INTERFACE SPECIFICATION
①Slot: Displaying the slot number when the battery is connected.
②Battery Type: Displaying the selected battery type (Li-ion 3.7V, Li-ion3.8V,
LiFePO4, Ni-MH/Cd)
③Battery Voltage: Displaying the currently actual battery voltage
④Capacity: Displaying the real-time capacity of the currently selected charge /
discharge status
⑤Mode: Displaying the selected status of the battery (Charge, Discharge,
Capacity Test)
⑥Current: Displaying the current of the selected battery
⑦Time: Showing the time from selecting the mode to completing the mode
⑧SLOT 1: Select the battery icon and it will turn red. When it is not selected, the
battery icon is green. If no putting battery, the icon shows NULL. When the slot is
selected, click the icon again to enter the settings interface of the slot. As the
following figure shows:
⑨SLOT 2: Selecting this icon, the battery icon will be red, and green when not
selected. If no putting battery, the icon shows NULL.
⑩SLOT 3: Selecting this icon, the battery icon will be red, and green when not
selected. If no putting battery, the icon shows NULL.
⑪SLOT 4: Selecting this icon, the battery icon will be red, and green when not
selected. If no putting battery, the icon shows NULL.
⑫Internal Resistance Test: Click the icon to enter the internal resistance test
interface. As the following figure shows:
⑬Voltage And Current Curve: Display the curve of selected slot battery. The
progress of the curve has an auto-scaling function. The yellow line is the voltage
curve and the red line is the current curve.
SETTINGS INTERFACE SPECIFICATION
Access multiple batteries and click the battery icon to switch curves. The selected
battery icon will turn red, and click the red battery icon again to enter the settings
interface. As the following figure shows:
①Shot: Displaying the current slot information (As pictured above )
②Operating Mode: Three modes: Charge, Discharge and Capacity Test; the
default mode is “Charge” (As pictured above )
③Current: Four kinds of currents can be selected, 0.5A, 1A, 1.5A and 2.0A;Li-ion
and LiFePO4’s default current is 1.0A; Ni-MH’s default current is 0.5A. (As
pictured above )
④Battery type: It will automatically identify Ni-MH and Li-ion batteries when the
batteries are in. When Li-ion batteries are detected, the Li-ion 3.7V charging
program is selected acquiescently; at this time Ni-MH/Cd option is red, which
cannot be selected. Putting a 3.8V Li-ion battery or LiFePO4 battery needs to
switch to the corresponding program Li-ion 3.8V or LiFePO4 manually. When
Ni-MH/Cd battery detected, the other three options are red, which cannot be
selected.
⑤Selected: The red border will appear when selected. (As pictured
above )
⑥Pending State: As pictured above
⑦Pending State: As pictured above
⑧Non-optional State: This status is red when the function cannot be selected. (As
pictured above )
⑨Back key: Clicking the button to return to the main interface (As pictured above
)
⑩Time: Displaying the operating time of the current slot (As pictured above
)
⑪Capacity: Displaying the capacity of the current slot in Charge, Discharge or
Capacity Test mode (As pictured above )
⑫Voltage: Displaying the real-time voltage of the current slot (As pictured
above )
NOTE:
a. The selected icon will display a red border.
b. For Ni-MH batteries, cannot select the battery type; the other three battery type
icons are red that is not optional, when the Ni-MH battery is identified.
c. Ni-MH batteries’ charging current can only be selected when the battery is just
inserted; after selecting current, the current cannot be changed. So the other
current icons turn red that is not optional.
d. The three kinds of the MODE menu (Charge, Discharge and Capacity) can be
switched at any state.
INTERNAL RESISTANCE TEST INTERFACE
1Voltage: Displaying the voltage of the battery being tested.
2Internal Resistance: Displaying the internal resistance of the battery being
tested.
3Back key: Clicking the button to return to the main interface
Test Method:
Tabla de contenidos
Manuales populares de Equipo de prueba de otras marcas
SMART
SMART KANAAD SBT XTREME 3G Series Manual de usuario
Agilent Technologies
Agilent Technologies BERT Serial Manual de usuario
Agilent Technologies
Agilent Technologies N3280A Manual de usuario
Vernier
Vernier Go Direct Voltage Manual de usuario
Lifeloc
Lifeloc R.A.D.A.R. Manual de usuario
Fluke
Fluke T5-600 Instrucciones de funcionamiento e instalación
