Nokia BH-904 Manual de usuario

Nokia Bluetooth Headset BH-904

14 15

DECLARATION OF CONFORMITY

Hereby, NOKIA CORPORATION declares

that this HS-101W product is in

compliance with the essential

requirements and other relevant

provisions of Directive 1999/5/EC. A copy

of the Declaration of Conformity can be

found at http://www.nokia.com/phones/

declaration_of_conformity/.

Bluetooth is a registered trademark of

Bluetooth SIG, Inc.

Introduction

With the Nokia Bluetooth Headset

BH-904, you can make and answer

calls hands-free with your

compatible mobile device. The

headset is provided with a sliding

boom that allows you to talk at a

lower volume or in a noisy

environment. Noise cancellation

helps you handle calls in noisy

environments.

Read this user guide carefully before

using the headset. Also, read the

user guide for the device that you

connect to the headset.

Note: The surface of this

device does not contain

nickel in the platings. The

surface of this device

contains stainless steel.

Bluetooth compatibility

The headset is compliant with the

Bluetooth Specification 2.1 + EDR

supporting the Headset Profile 1.1

and Hands-Free Profile 1.5. Check

with the manufacturers of other

devices to determine their

compatibility with this device.

Get started

The headset contains the following

parts shown on the title page:

volume key (1), sliding boom (2),

earpiece (3), indicator light (4),

power key (5), charger connector

(6), mute key (7), answer/end key

(8), and microphones (9).

Before using the headset, you must

charge the battery and pair the

headset with a compatible device.

Compatible chargers

This device is intended for use when

supplied with power from the

following chargers: AC-6 and DC-6.

The exact charger model number

may vary depending on the type of

plug. The plug variant is identified

by one of the following: E, EB, X, AR,

U, A, C, or UB.

Charge the battery

1. Connect the charger to a wall

outlet.

2. Lift the cover of the charger

connector, and connect the

charger cable to it (10). The red

indicator light is displayed

during charging.

Charging the battery fully may

take up 35 minutes with the AC-

6 charger. Charging the battery

with the AC-6 charger for 15

minutes provides up to 5 hours

of talk time.

3. When the battery is fully

charged, the green indicator

light is displayed. Disconnect the

charger from the headset, then

from the wall outlet. Push the

cover over the charger

connector.

To charge the headset with a

compatible Nokia charger that has a

2.0 or 3.5 mm charger plug, use the

Nokia Charger Adapter CA-146C

(sold separately).

To charge the battery through the

USB port of a compatible PC,

connect one end of the Nokia

Connectivity Cable CA-101 (sold

separately) to the charger connector

and the other end to the USB port.

The fully charged battery has power

for up to 8 hours of talk time or up

to 160 hours of standby time.

To check the battery charge when

the headset is not connected to a

charger, press the power key when

the headset is switched on. If the

indicator light is green, the charge

level is sufficient. If the light is

yellow, you may need to recharge

the battery soon. If the light is red,

recharge the battery.

When the battery charge is low, the

headset beeps every 5 minutes and

the red indicator light flashes.

Switch on or off

To switch on, press and hold the

power key for about 2 seconds. The

headset beeps, and the green

indicator light is displayed. The

headset tries to connect to one or

two last connected devices. When

the headset is connected to a device

and is ready for use, the blue

indicator light flashes slowly. If the

headset has not been paired with a

device, it automatically enters

pairing mode.

To switch off, press and hold the

power key for about 2 seconds. The

headset beeps, and the red indicator

light is briefly displayed. If the

headset is not connected to a device

within 30 minutes, it switches off

automatically.

Pair and connect the headset

Before using the headset, you must

pair and connect it to a compatible

device.

You can pair the headset with up to

eight devices, but you can connect

it to only up to two devices at a

time.

1. Ensure that your mobile device is

switched on and the headset is

off.

2. If the headset has not been

previously paired with a device,

switch on the headset. The

headset enters pairing mode, and

the blue indicator light starts to

flash quickly.

If the headset has been

previously paired with a device,

ensure that the headset is

switched off, and press and hold

the power key for about 5

seconds until the blue indicator

light starts to flash quickly.

3. Activate the Bluetooth feature

on your device, and set it to

search for Bluetooth devices. For

details, see the user guide of your

device.

4. Select the headset from the list

of found devices.

5. If necessary, enter the passcode

0000 to pair and connect the

headset to your device.

In some devices, you may need to

make the connection separately

after pairing.

When the headset is connected to

at least one device and is ready for

use, the blue indicator light flashes

slowly.

To manually connect the headset to

one or two last used devices, press

and hold the answer/end key for

about 2 seconds (when no devices

are connected), or make the

connection in the Bluetooth menu

of the desired device. If you have a

device connected to the headset

and want to connect a second

device, make the connection in the

Bluetooth menu of the device.

You may be able to set your device

so that the headset connects to it

automatically. To activate this

feature in a Nokia device, change

the paired device settings in the

Bluetooth menu.

Basic use

Change the earplug

The headset may be provided with

different sized earplugs. Select the

earplug that fits the best and is the

most comfortable for your ear.

To change the earplug, pull the

current earplug from the earpiece

(11), and push the new earplug into

place (12).

Place the headset on the ear

Place the headset over your ear in a

comfortable position, and slide it

downwards (13). Gently push the

earpiece into your ear. Point the

headset toward your mouth.

Sliding boom

The sliding boom brings the

microphone closer to your mouth,

which improves the audio quality

when you talk at a lower volume or

in a noisy environment. You can use

the boom to answer or end a call.

To use the boom, gently pull it down

toward your mouth (14), or push it

up to its initial position (15).

Adjust volume

The headset automatically adjusts

the volume according to ambient

noise. To manually adjust the

volume, slide the volume key up or

down. To adjust the volume quickly,

slide and hold the key.

The selected volume level is saved

for the device that you currently use

with the headset.

Calls

To make a call, use your mobile

device in the normal way when the

headset is connected to it.

To redial the number you last called

(if your mobile device supports this

feature with the headset), when no

call is in progress, press the answer/

end key twice.

To activate voice dialling (if your

mobile device supports this feature

with the headset), when no call is in

progress, press and hold the answer/

end key for about 2 seconds.

Proceed as described in the user

guide of the mobile device.

To answer a call, pull the boom

completely down toward your

mouth, or press the answer/end key.

(For noise cancellation, the boom

has to be completely pulled down.)

To reject a call, press the answer/

end key twice.

To end a call, push the boom up to

its initial position, or press the

answer/end key.

To mute the microphone, slide the

mute key toward your mouth. To

unmute the microphone, slide the

mute key to the opposite direction.

When you mute or unmute the

microphone, the headset beeps

twice.

To switch a call between the

headset and a compatible

connected device, press and hold

the answer/end key for about 2

seconds.

Allow connection to two

devices

You can have the headset connected

to two devices at the same time.

By default, the headset can only be

connected to one device at a time.

To allow the headset to connect to

two devices, switch off the headset,

and press and hold the power key,

and slide and hold the volume key

up for about 5 seconds. The blue

indicator light flashes twice.

To allow the headset to connect to

only one device, switch off the

headset, and press and hold the

power key, and slide and hold the

volume key down for about 5

seconds. The green indicator light

flashes twice.

If the headset can connect to two

devices at the same time and you

use redialling or voice dialling, the

call is made on the device that you

last used to make a call when the

headset was connected to it.

Clear settings or reset

To clear all the pairing settings from

the headset, switch off the headset,

and press and hold the power key

and the answer/end key at the same

time for about 5 seconds. The

headset beeps twice, and the red

and green indicator lights alternate.

After the settings are cleared, the

headset enters pairing mode.

To reset the headset if it stops

functioning, even though it is

charged, connect the headset to a

charger, and press the power key

and the answer/end key at the same

time.

Troubleshooting

If you cannot connect the headset

to your compatible device, check

that the headset is charged,

switched on, and paired with the

device.

Otros manuales para BH-904

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Auriculares de Nokia

Nokia

Nokia 9232254 Manual de usuario

Nokia

Nokia Hs-45 - And Ad-57 Xpressmusic Stereo Headset 5310 3.5mm... Manual de usuario

Nokia

Nokia HS-21W Manual de usuario

Nokia

Nokia BH 104 - Headset - Over-the-ear Manual de usuario

Nokia

Nokia BH 301 - Headset - Over-the-ear Manual de usuario

Nokia

Nokia BH-806 Manual de usuario

Nokia

Nokia BH-217 Manual de usuario

Nokia

Nokia BH-900 Manual de usuario

Nokia

Nokia BH-606 Manual de usuario

Nokia

Nokia BH-109 Manual de usuario

Nokia

Nokia BH-803 - Headset - Over-the-ear Manual de usuario

Nokia

Nokia BH-106 Black Manual de usuario

Nokia

Nokia BH-108 Manual de usuario

Nokia

Nokia BH-703 - Headset - Over-the-ear Manual de usuario

Nokia

Nokia HS-16 Manual de usuario

Nokia

Nokia BH 211 - Headset - Over-the-ear Manual de usuario

Nokia

Nokia HS-54W - Headset - Over-the-ear Manual de usuario

Nokia

Nokia BH105 - Bluetooth Headset Ice Manual de usuario

Nokia

Nokia BH-501 Manual de usuario

Nokia

Nokia BH-500 Manual de usuario

Nokia

Nokia HS 36W Manual de usuario

Nokia

Nokia N75 Manual de usuario

Nokia

Nokia BH-905 Manual de usuario

Nokia

Nokia BH-111 Manual de usuario

Manuales populares de Auriculares de otras marcas

Sena

Sena SMH10 Manual de usuario

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manual de usuario

Sennheiser

Sennheiser EPOS ADAPT 230 Manual de usuario

Doro

Doro Flexus HS2005 Manual de usuario

GE 98971 Manual de usuario

Hama

Hama 00184070 Manual de usuario

Plantronics

Plantronics Blackwire 3200 Series Manual de usuario

Blue Tiger

Blue Tiger Advantage PLUS Manual de usuario

Jawbone

Jawbone Icon Manual de usuario

Jabra

Jabra FR 20 Manual de usuario

Roxcore

Roxcore Flow A+ Manual de usuario

Turtle Beach

Turtle Beach XP 510 Manual de usuario

Philips

Philips SHB6101 Manual de usuario

Jabra

Jabra PRO 9460 Duo Manual de usuario

HyperX

HyperX HyperX Cloud Flight Manual de usuario

Bose

Bose MIE2 Mobile Manual de usuario

Jabra

Jabra Steel Manual de usuario

HyperX

HyperX cloud ii Manual de usuario