NKT Photonics SuperK SPLIT Manual de usuario

Item 800-616-01

SuperK SPLIT

PRODUCT GUIDE

Broadband Filter

PRODUCT GUIDE

This guide includes the following NKT Photonics products:

SuperK SPLIT

Broadband filter with split VIS and NIR/IR optical outputs

SuperK SPLIT

Broadband filter with split VIS/NIR and NIR/IR optical outputs

Product numbers:

A102-200-000

A102-500-000

SuperK SPLIT Product Guide Release 1.1 01-2021 W-10456

GUIDE OVERVIEW

This product guide is intended to provide functional, operational and installation

information for the SuperK SPLIT. The guide includes chapters that cover SPLIT

description, installation, operation and parameter adjustment.

Warning: Do not operate a laser with the SPLIT before first reading and under-

standing all warnings, cautions and handling information stated within the docu-

ment:

SuperK “Laser model” Safety, Handling and Regulatory Information

The paper copy of this guide is included with your accessory; it can also be

downloaded from:

https://www.nktphotonics.com/lasers-fibers/support/product-manuals/

Documentation A USB memory stick is included. It contains documentation for all NKT Photonics

products including this accessory.

Terminology The guide may refer to the SuperK SPLIT as the SPLIT, device or accessory.

Target Audience This guide is for technical personnel involved in the selection, planning and

deployment of lasers and photonic equipment in laboratory and industrial

settings. The guide assumes a reasonable knowledge level of lasers, photonic

principles and electrical interface connectivity.

Chapters Inside This guide includes the following chapters:

• Chapter I “Description” — Describes the accessory including its general

operational principles, management and interfaces.

• Chapter 2 “Installation” — Includes information and procedures on how to

correctly install the accessory chassis.

• Appendices — Appendices include specifications, servicing information, and

support contact details.

Added information

and Safety Notices

Lasers with their accessories are highly dangerous devices that can cause

serious injury and property damage. This guide use the following symbols to

either highlight important safety information or provide further information in

relation to a specific topic.

Note: Highlights additional information related to the associated topic and/or pro-

vides links or the name of the NKTP guides describing the additional information.

Caution: Alerts you to a potential hazard that could cause loss of data, or

damage the system or equipment.

Warning: The laser safety warning alerts you to potential serious injury that may

be caused when using a laser with the accessory.

Revision This section records the document revision details.

Release date Release version and changes

2020-October 1.0 Updated from earlier manual.

2021-January 1.1 Updated support contact details in appendix B.

CONTENTS

Guide Overview ................................................................................................................... 3

Documentation ....................................................................................................... 3

Terminology ............................................................................................................ 3

TABLES ..................................................................................................................... 7

FIGURES ...................................................................................................................9

PROCEDURES .........................................................................................................11

1 Description ...........................................................................................................................13

Output options ......................................................................................................13

Additional filtering ................................................................................................13

Features ....................................................................................................................... 14

Output ......................................................................................................................14

Interlock ..................................................................................................................14

Shutters ...................................................................................................................14

Interfaces ..................................................................................................................... 14

Top panel ................................................................................................................14

Optical apertures ................................................................................................. 16

Electrical Interfaces ..............................................................................................17

Status LEDs ................................................................................................................. 18

Chassis labels ............................................................................................................ 20

2 Installation ...........................................................................................................................23

Installation process .............................................................................................23

General ...................................................................................................................23

Optical Connections ................................................................................................ 24

Inserting the collimator ..................................................................................... 24

Electrical Connections ........................................................................................... 25

External bus ......................................................................................................... 25

Adding additional accessories ........................................................................ 26

A Specifications .................................................................................................................... 29

B Service and Support Information .................................................................................. 31

Servicing ...................................................................................................................... 31

Opening the chassis ........................................................................................... 31

WARRANTY VOID IF REMOVED label ........................................................... 31

Support Contact Details ........................................................................................... 31

Online Support Web-page ................................................................................ 31

Shipping Address ............................................................................................... 32

TABLES

Table 1: Status LEDs.............................................................................................................. 19

Table 2: Chassis labels ....................................................................................................... 20

Table 3: Optical .................................................................................................................... 29

Table 4: Interfaces ............................................................................................................... 29

Table 5: Mechanical dimensions ..................................................................................... 29

Table 6: Operating and storage environment ............................................................. 29

Table 7: Safety and regulatory compliances ................................................................ 29

FIGURES

Figure 1: SuperK SPLIT general view .............................................................................. 13

Figure 2: SuperK SPLIT functional view ......................................................................... 13

Figure 3: Output aperture shutters .................................................................................. 14

Figure 4: Top panel .............................................................................................................. 15

Figure 5: Optical Interfaces ............................................................................................... 16

Figure 6: Electrical Interfaces and optical input ............................................................17

Figure 7: Status LEDs .......................................................................................................... 18

Figure 8: Side panel manufacturing label (generic) ................................................... 20

Figure 9: Top panel labels ................................................................................................. 21

Figure 10: Partially inserting the collimator ................................................................... 24

Figure 11: Collimator alignment key and slot ................................................................ 24

Figure 12: Collimator lock screw .................................................................................... 25

Figure 13: Connecting the External bus - SuperK laser ............................................. 26

Figure 14: Connecting the External bus and bus defeater - SPLIT ......................... 26

Figure 15: Bus defeater ...................................................................................................... 26

Figure 16: Mechanical dimensions .................................................................................. 30

Figure 17: Warranty seal ...................................................................................................... 31

white

Otros manuales para SuperK SPLIT

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de filtración de agua de NKT Photonics

NKT Photonics

NKT Photonics SUPERK SELECT Manual de usuario

NKT Photonics

NKT Photonics SuperK VARIA Manual de usuario

NKT Photonics

NKT Photonics SuperK SPLIT Manual de usuario

NKT Photonics

NKT Photonics SUPERK SELECT Manual de usuario

NKT Photonics

NKT Photonics SuperK CONNECT Manual de usuario

Manuales populares de Sistema de filtración de agua de otras marcas

Wisy

Wisy LineAir 100 Manual de usuario

Schaffner

Schaffner Ecosine FN3446 Series Manual de funcionamiento

Pentair

Pentair FLECK 4600 SXT Guía del usuario

H2O International

H2O International H20-500 Manual de usuario

Renkforce

Renkforce 2306241 Manual de usuario

Neo-Pure

Neo-Pure TL3-A502 Manual de usuario

FLTR

FLTR OBF Manual de usuario

STA-RITE

STA-RITE VERTICAL GRID DE FILTERS S7D75 Manual de usuario

Applied Membranes

Applied Membranes W-G844EM Manual de usuario

BEGA

BEGA 116 Manual de usuario

WATA

WATA Standard Manual de usuario

Price

Price FFU series Manual

Gaggenau

Gaggenau BRITA INTENZA 467873 Manual de usuario

Brita

Brita SAFF-100 Manual de usuario

HEISSNER

HEISSNER FPU24000-00 Manual de usuario

BGS technic

BGS technic 1518 Manual de usuario

Reverse Osmosis

Reverse Osmosis RF Series Manual de usuario

ubbink

ubbink Filtramax Series Manual de usuario