NIX Advance X12D Manual de usuario

Digital Frame
X12D / X15D
User Manual

4
1.
1.1
1.2
1.3
1.4
1.5
FRAME OVERVIEW
Front of Frame
Back of Frame
Remote Control
Box Contents
Wall-mounting your Digital Frame
Contents
2. FRAME SETUP 6
7
13
15
16
3. GETTING STARTED
4.
SAFETY & COMPLIANCE
5.
TROUBLESHOOTING
6.
ONE-YEAR WARRANTY
Assemble Digital Frame
Plug in Power Adaptor to your Digital Frame
Turn Power Button to ON position
2.1
2.2
2.3
3.1
3.2
3.3
3.4
3.5
Main Menu
Play
On-screen Options
Calendar
Settings
6.1
6.2
6.3
6.4
6.41
6.42
Notes of Importance
Important Safety Information
Adaptor Information
Compliance Information
FCC Compliance
IC Compliance

P. 4
Frame Overview 1
Front of Frame
Back of Frame
Remote Control
1.1
1.2
1.3
SD/SDHC Card Slot
Connect and view photos and
videos from the memory card
Headphone/Speaker port
Connect your headphones or
speakers
USB Port
Connect your USB memory stick
and view photos and videos
Power Adaptor DC-in (12V)
Plug in power cable for power
ON / OFF
Turns Digital Frame on or puts it
into standby
Slide Show
Starts the slideshow (photos only)
UP/DOWN/LEFT/RIGHT
4-way navigation pad/ video
playback control
Motion Sensor
Senses movement and turns the
Digital Frame ON and OFF
ON/OFF Switch
Turns Digital Frame ON and OFF
Menu Button
This will allow you to go back a
step
4-way Navigation Pad
and Play/Pause button
Helps you navigate and select
Stand screw hole
Play
Select/Play/Pause
Back
Go Back a step
Settings
Go to Settings Menu
Infra-red Sensor
Receives signals from the remote
control
A
B
A
C
D
E
F
K
L
M
B
G
H
I
J
N
O
P
C
K
O
D
E
F
G
HI
L
J
PNM

P. 5
Box Contents1.4
Digital Frame Remote Control
Power Adaptor
USB Memory StickScrew-in stand
Wall-mounting your Digital Frame1.5
Slide the back-plate from the back of the digital frame to reveal the 75 x 75 mm VESA
mount holes.
NOTE: If you intend to wall-mount the frame, you can change the orientation of the
display by referring to Display Settings in the Settings Menu (Sect 3.5).

P. 6
Assemble Digital Frame:2.1
Plug in the Power Adaptor to your Digital Frame:
2.2
Turn Power Button to ON position:2.3
Then plug your Digital Frame cable into a power source.
Screw in the stand to the back of the Digital Frame and remove the plastic tab
from your Remote.
This is located on the back of your Digital Frame.
Frame Setup 2

P. 7
Main Menu3.1
Once powered on, the digital frame will load and you will be greeted by the Main Menu screen.
Navigate the Main Menu using the 4-way navigation pad on the remote control or back of
the frame.
Press to select an option.
Play3.2
Insert an SD Card and/or a USB Stick into the back of your Digital Frame. Once the
frame successfully reads your media device, a notication “New storage is ready to
use” will appear.
Select what media device you want to play content from (media device will not be
selectable if not inserted):
Play All Photos
Play All Videos
Play All Media
Browse
Play
Calendar
Settings
View content from your inserted storage devices
View photos within a calendar
Congure the settings for your Digital Frame
All JPEG photo les will be played
All MP4 video les will be played
All photos and videos will be played
Search for photos and videos you want to play
Press to select an option.
Getting Started 3

P. 8
On-screen Options3.3
During photo and video playback, you can select on the remote control to bring
up the on-screen settings for the media content you are displaying.
Once you have nished adjusting the on-screen settings, press to return to media.
Picture Settings
ITEM DESCRIPTION OPTION
Zoom Magnify photo
None
140%
200%
280%
400%
Rotate Adjust orientation of photo (orientation is
saved on inserted media device)
None
90
180
270
Brightness Adjust brightness of display 0-100
Contrast Adjust contrast of display 0-100
Saturation Adjust saturation of display 0-100
Hue Adjust hue of display 0-100
Slideshow Interval Select time duration for a photo to be
displayed
3s
5s
10s
30s
60s
1hr
Screen Mode Select how photos are displayed on your
Digital Frame screen
Fill
Fit
Delete File Permanently delete le from inserted
media device -
Go To Main Settings Adjust Digital Frame settings -

P. 9
Video Playback
Video Settings
Play/Pause Video
Fast Forward/Rewind Video (Hold down to increase speed, release to resume playback)
Audio Volume Control
Hide Playback control
During video playback, press on the remote control to access the playback control.
ITEM DESCRIPTION OPTION
Brightness Adjust brightness of display 0-100
Contrast Adjust contrast of display 0-100
Saturation Adjust saturation of display 0-100
Hue Adjust hue of display 0-100
Screen Mode Select how videos are displayed on your
Digital Frame screen
Fill
Fit
Rotate Adjust orientation of video
None
90
180
270
Delete File Permanently delete le from inserted
media device -
Go To Main Settings Adjust Digital Frame settings -

P.10
Calendar3.4
Display a Calendar and Clock over your photos from your inserted default media
device. Please note that videos will not play in Calendar mode.
To congure the time, this can be changed in Time Settings in the Settings Menu
(Sect 3.5)
Settings3.5
Navigate the Settings Menu using the 4-way navigation pad on the remote control
or back of the frame. There are three options:
Display
Time
General
Change the settings of your display and slideshow
Set the clock and calendar time
Congure settings for your frame
Press to select an option.

P.11
Display
ITEM DESCRIPTION OPTION
Brightness Adjust brightness of display 0-100
Contrast Adjust contrast of display 0-100
Saturation Adjust saturation of display 0-100
Hue Adjust hue of display 0-100
Rotate Screen Change orientation of user interface
None
90
180
270
Slideshow Effect Select a transition effect in between
photos
Persian Blind H
Persian Blind V
Slide Up
Slide Down
Slide Left
Slide Right
Mosaic
Random
Slideshow Interval Select the time duration for a photo to be
displayed
3s
5s
10s
30s
60s
1hr
Slideshow Order Sort the order of media playback
A-Z
Date
Shufe
Screen Mode Select how media is displayed on your
Digital Frame screen
Fill
Fit
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
