Nintendo Nintendo Switch Lite Dimensiones
Power
How to Access the POWER Menu
1. To display the POWER Menu, press and hold the POWER button for at least
three seconds.
You can choose to power off the Nintendo Switch or set it to Sleep Mode.
After ten seconds of inactivity while the POWER Menu is being displayed
the console will enter Sleep Mode.
2. To exit the POWER Menu, press the B or HOME button.
How do I turn the Nintendo Switch console off?
It's recommended that you put the console into sleep mode when you stop playing. This will
reduce battery consumption and will allow you to quickly resume playing.
Other ways to enter/exit sleep mode
If you want to turn the console off completely, do the following:
1. Hold the Power button for three seconds to open the Power Menu.
2. Select "Power Options" and then "Power Off".
Make sure you save your progress in a game before turning off the power. Any unsaved progress
will be lost.
The Nintendo Switch console won't turn on
Has the battery run out? Try charging the console.
The console may be frozen.
→There is a chance that the console has frozen with a black screen. Look at the console
in a darkened room and see if any light is coming from the screen. If so, the console has
frozen. Hold the POWER Button for 12 seconds or more to turn the console off.
Then, press the POWER Button to turn the console on again.
Console Cannot Be Charged or the Charge Doesn’t Last Very Long
The Nintendo Switch console does not seem to charge, or the battery charge continues to go
down despite being connected to the AC adapter.
The console battery does not last very long despite charging for several hours.
Additional Information:
The Nintendo Switch console takes approximately 3 hours to fully charge when the console is
powered off or in sleep mode. Charging time will be longer if the console is in use.
When fully charged, the battery duration for the console can last approximately 3 hours. This
will vary depending on the software application and functions being used.
What to Do:
1. Power off the console and reset the AC adapter by unplugging it from both ends. Leave
the AC adapter unplugged for at least 30 seconds.
oWhile it is unplugged, verify that the original Nintendo Switch AC adapter is
being used (model No. HAC-002).
If a different power source is being used, or if the original AC adapter is
damaged, replacing it with the official Nintendo accessory may resolve the
problem.
2. Connect the original AC adapter to the console and then directly to a wall outlet.
oWhen the AC adapter is first plugged into the console, the LCD screen will power
on and the battery charging indicator will be displayed on the upper right corner
of the screen.
If the battery charge on the console is almost depleted when the AC
adapter is first plugged in, the screen will remain off and a charging
indicator will be momentarily displayed on the top left corner of the LCD
screen. Allow the console to charge for at least 15 to 30 minutes, then
press the POWER Button to boot it up.
Situation Not Resolved:
If the battery charge does not last very long once the AC adapter is removed, then there could
still be an issue with the console or with the AC adapter. If possible, test the console using a
second Nintendo Switch AC adapter.
If the console battery charges correctly while using another AC adapter, then the original
Nintendo Switch AC adapter will need to be replaced. Please contact Nintendo Customer Service
for further assistance.
If the console will still not hold a charge even while using a different AC adapter, or if another
AC adapter is unavailable, the Nintendo Switch console will need to be repaired. For testing
purposes, please include the original AC adapter. Please contact Nintendo Customer Service for
further assistance.
The Nintendo Switch console gets hot
Are you using the console in a place that may be too hot?
→If the surrounding temperature is too hot, the console may overheat. The console
should be used in a place where the temperature is between 5 and 35°C. Stop using the
console if it becomes too hot while playing in handheld mode, as this may lead to skin
burns.
The console may become hot during charging or when it's being used in TV mode, but
this is normal and should not be considered a defect.
The Console Has No Power, Has a Blank Screen, or Won't Wake Up From Sleep Mode
The information in this article can help you when:
A Nintendo Switch system will not power on.
The LCD screen is blank while in handheld mode or tabletop mode.
After placing the system in sleep mode, it will not wake up when the POWER or HOME
Buttons are pressed.
Note: Nintendo Switch systems do not have a power light.
Switch Lite
1. What to do
1. Hold down the POWER Button for twelve seconds to force the system to shut down,
then power it on again.
2. Reset the AC adapter by leaving it unplugged from both ends for at least 30 seconds.
While performing this step, verify you are using the Nintendo Switch AC adapter
(model No. HAC-002 (AUS)) and check for any cuts, kinks, frayed cables, etc.
If any damage is found, or if a different charger is being used, replacing it with the
correct accessory may resolve the problem.
3. Connect the AC adapter to the system and directly to a wall outlet.
What is displayed on the LCD screen?
The Entrance Screen
If the Entrance Screen is displayed, allow the system to charge and ensure that the latest
system update is installed.
Only the Battery Charge Indicator
a) If the battery charge on the system is nearly depleted when the AC adapter is first
plugged in, the screen will remain off and a charging indicator will be momentarily
displayed on the top left corner of the LCD screen. Allow the system to charge for at least
15 to 30 minutes, then press the POWER Button to boot it up.
b) Once booted up, ensure the system has the latest system update installed.
Still not resolved:
If the issue is still not resolved hold down the POWER Button for twelve seconds to force
the console to shut down, then power it on again.
If the LCD screen still did not turn on the Nintendo Switch system will need to be
repaired. For testing purposes, please include the original AC adapter. Please contact
Nintendo Customer Service for further assistance.
The Screen didn't Power on or it Remains Blank:
Hold down the POWER Button for twelve seconds to force the system to shut down, then
power it on again.
LCD has now turned on:
Allow the system to charge for at least thirty minutes, then ensure that the latest system
update is installed.
LCD has not turned on:
Nintendo Switch system will need to be repaired. For testing purposes, please include the
original AC adapter. Please contact Nintendo Customer Service for further assistance.
Frequently Asked Questions
How to Enable/Disable the Console Button Input
Important:
This setting is on by default and is available for Nintendo Switch Lite only. It is not
compatible with the Nintendo Switch system.
This setting can be turned off only when there is a wireless controller paired to the
system.
Additional Information:
When this setting is turned off, the console will stop receiving inputs from the console
buttons, and it will only receive inputs from a paired wireless controller.
This setting will be turned back on automatically when the console is restarted, or after
returning from sleep mode.
Complete These Steps:
1. From the HOME Menu, select System Settings.
2. Navigate to the Controllers and Sensors section, then select Console Button Input.
This setting will be turned off.
Select this option again to turn it back on.
Can I change my friend code?
To change your friend code, select System Settings from the HOME Menu, then select
"User". Pick the relevant user, then select Friend Settings ⇒Reissue Friend Code.
Changing your friend code will not affect your friend list or blocked-user list.
ooff?
Select System Settings from the HOME Menu, then "User". Choose the relevant
user and select "Friend Settings". You can then disable friend requests under
"Receive Friend Requests".
oCan I change my friend code?
oHow to Enable/Disable the Console Button Input
How do I reset the keyboard's predictive text suggestions?
You can clear the predictive text suggestions by resetting the keyboard. To reset the
keyboard, open System Settings on the HOME Menu, then select System ⇒Formatting
Options ⇒Reset Keyboard.
Select the user you'd like to reset the keyboard for, then follow the on-screen instructions.
I can't take screenshots or the Capture Button doesn't work
Is the message "Unable to take a capture now." displayed?
→It may not be possible to takes screenshots in all software, and in some software
screenshots may only be possible at certain times.
Is the controller connected to the Nintendo Switch console?
→Please check if other buttons on the controller are working. If not, refer to (link to "The
controllers are not recognised by the console." in the FAQ).
Where can I go for important information about my Nintendo Switch console?
Please read the Important Information booklet included with your Nintendo Switch
console.
Otros manuales para Nintendo Switch Lite
4
Tabla de contenidos
Otros manuales de consola de juegos de Nintendo
Nintendo
Nintendo 3DS Manual de usuario
Nintendo
Nintendo 1504166 - Game Boy Advance SP Edition... Manual del propietario
Nintendo
Nintendo Switch Carrying case & screen protector Manual de usuario
Nintendo
Nintendo Wii U Manual de usuario
Nintendo
Nintendo Starlight Fun Center Manual de usuario
Nintendo
Nintendo 64 Manual de usuario
Nintendo
Nintendo 2DS XL JAN-001 Manual de usuario
Nintendo
Nintendo e-reader Manual de usuario
Nintendo
Nintendo Wii U Manual de usuario
Nintendo
Nintendo Wii U Manual de usuario
Nintendo
Nintendo Switch Manual de usuario
Nintendo
Nintendo Game Boy Micro Manual de usuario
Nintendo
Nintendo LABO Manual de usuario
Nintendo
Nintendo 3DS Manual de usuario
Nintendo
Nintendo Gameboy Advance Manual de usuario
Nintendo
Nintendo Wii U Manual de usuario
Nintendo
Nintendo Wii U Manual de instrucciones
Nintendo
Nintendo Wii U Deluxe Set Guía de instalación
Nintendo
Nintendo N64 Rumble Pak Manual de usuario
Nintendo
Nintendo TSC Manual de usuario
