Nilox MINI Wi-Fi 2 Manual de usuario
EN
NXMWF2001
CAUTIONS
Keep the camera safe from falling and dropping.
Do not place heavy objects on the camera.
Keep it at away from any strong magnetic interference objects like electrical machines to
avoid strong radio waves from damaging the product and affecting the sound or image quality.
Keep the camera away from water and liquids (unless equipped with a waterproof case).
This may cause the camera to malfunction.
Do not directly expose the product to high temperatures over 55°C.
We recommend using a high quality Micro SD Card for best results. Please format the micro
SD micro SDHC and micro SDXC memory card in the camera before using and restart the
camera after formatting.
Do not place your Micro SD card near strong magnetic objects to avoid data error or loss.
Remove the battery before using as a dash camera.
Lithium battery. Danger of explosion if replaced with an incorrect battery type.
In case of overheating, unwanted smoke or an unpleasant smell from the device, unplug it
immediately from the power outlet to prevent hazardous fire.
Keep it away from children while charging.
Do not use the camera when it is low on power.
Do not use the camera while it is charging.
Store the device in a cool, dry and dust free place.
Do not attempt to open the case of the camera or modify it in any way. If the camera has
been dismantled, the warranty will be void.
EN
1
INTRODUCTION
Action Camera “Nilox Mini Wi-Fi 2”is a high-definition digital motion video recording device,
created to meet market demand. It has a wide variety of the leading features for digital video
recording, photo shooting, audio recording, with screen display and detachable battery. Best
suited for vehicle recording, outdoor sports, home security, diving and other related activities.
Allowing you to enjoy the moments while capturing every scene anytime, anywhere.
EN
2
THE BASICS
EN
3
1.Power/Mode 2.UP/WI-FI 3.DOWN 4.LENS
5.TF card slot 6.USB slot 7.HDMI
8.OK/SHUTTER
GETTING STARTED
HELLO
Congratulation on your new camera! This user manual will help you learn the basics of
capturing life’s most incredible moments!
To power ON:
Press and hold the Power/Mode Button for a few seconds to switch the screen on.
EN
4
Tips:
* In order to take a clear video or photo, please tear off the lens protection film of the
waterproof shell before use.
* In order to ensure the waterproof performance, please make sure that the waterproof shell
is sealed well before use. If the white silicone ring of the waterproof shell cannot seal well,
please stop using this waterproof shell.
* Please dry it immediately after use, otherwise the waterproof shell metal button will gather
dust and reduce the waterproof performance
* The waterproof shell is a vulnerable product. We strongly recommend replacing the
waterproof shell in time, depending on the environment and frequency of use.
* When using the camera with the waterproof shell in low temperatures, such as winter, rain,
underwater and so on, please use the anti-fogging treatment to avoid blurred video.
OVERVIEW
Turn camera ON and repeatedly press the Power/Mode Button to move through the camera
modes and settings. The modes will appear in following order:
SETTINGS
Repeatedly press the Power/Mode Button for the Setting Menu, use the UP or Down Button
to move through the various options and press the Ok/Shutter Button to select the desired
option.
Video Setting:
Video Resolution: EIS 4K30, EIS 2.7K30, EIS 1080P60, EIS720P120
Looping Video: Off/1 Min/3 Mins/5 Mins
EN
5
To power OFF:
Press and hold the Power/Mode Button for a few seconds to switch off the screen.
Time-Lapse Video: Off/1Sec/5Secs/10Secs/30Secs/60Secs
Slow Motion: Off/1080P 60/720p 120
Motion Detection: Off/On
Audio Record: Off/On
Photo Setting:
Photo Resolution: 20M/16M/12M/8M/5M
Self-Timer Photo: Off/2Secs/10Secs
Burst Photo: Off/3photos/5photos
General Setting:
Volume: 0~10
Beep: Off/On
Exposure: +-2.0~0
White Balance: Auto/daylight/cloudy/fluoresc./fluoresc. 1/fluoresc. 2
ISO: Auto/ISO100/ISO200/ISO400/ISO800/ISO1600
Effect: Normal/Sepia/B&W/Negative
Contrast: -100~100
Saturation: -100~100
Sharpness: -100~100
System Setting:
Language: English/Italian/Español//Portugues/France/Deutsch/Greek
Car Mode: Off/On
EN
6
VIDEO MODE
Video
To record a video, verify that the camera is in a different Video Mode and set the desired video
resolution. If the Video icon is not showing in the LCD display of your camera, press the
Power/Mode Button repeatedly to then set the menu and select the desired option in the Video
Setting menu (such as Looping Video/Time-lapse Video/Slow Motion/Motion Detection etc)
EN
7
Power Off: Never/1Min/5Mins
Date & Time: ___Y___M___D 00:00:00
Date Format: None / YYYY MM DD / MM DD YYYY / DD MM YYYY
Stamp: Off/On
Frequency: 50Hz/60Hz
Upside Down: Off/On
Screen Saver: Off/30secs/1min/3mins
Format: YES/NO
Reset: YES/NO
FW Version:LX15PD79-1.5A
Exit:
Press the shutter button to exit
Tips: To ensure the correct setting succeed, please restart your camera after setting.
PHOTO MODE
Photo
To take the photo in different Photo Modes and set the desired photo resolution, if the photo
icon is not showing in the LCD display of your camera, press the Power/Mode Button
repeatedly for the menu setting and select the desired option in the Photo Setting menu
(such as Time-lapse Photo/Burst Photo).
To Start Recording:
Press the Ok/Shutter Button. The camera Status Light and a Red Dot on the screen will flash
while recording.
To Stop Recording:
Press the Ok/Shutter Button. The camera Status Light and a Red Dot on the screen will stop
flashing to indicate recording has stopped
To Turn On/Off the audio record:
Press the Down Button. The MIC icon will show the status in the right corner of the screen.
Tips:
The camera automatically stops recording when the battery is out of power. Your video will be
saved before the camera powers off.
The camera automatically stops recording when the SD card is full, if the looping record
function is turned off.
EN
8
Taking a photo:
Press the Ok/Shutter Button. The camera will emit the camera shutter sound.
Self-timer photo
Verify if the camera is in Self-timer photo mode. If the Self-timer photo icon on your camera's
LCD screen doesn't appear, press the Power/ Mode Button repeatedly to the Photo Setting
Menu, then select the desired option of the Self-timer photo in the Setting Menu.
To take a self-timer photo:
Press the Shutter Button, the camera will emit shutter sound each time a photo is taken.
Burst Photos
To take a Burst Photo series, verify the camera is in Burst Photo mode. If the Burst Photo icon
on the LCD screen of the camera does not appear, press the Power/Mode Button repeatedly
to the Photo Setting Menu, then select the desired option of the Burst Photo in the Setting
Menu.
To capture a Burst Photo series:
Press the Ok/Shutter Button, the camera will emit a shutter sound each time a photo is taken.
EN
9
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cámara de acción de Nilox
Nilox
Nilox F60 Reloaded Manual de usuario
Nilox
Nilox 13NXAKNAWI001 Manual de usuario
Nilox
Nilox F60 Reloaded Manual de usuario
Nilox
Nilox MINI WI-FI Manual de usuario
Nilox
Nilox MINI F Manual de usuario
Nilox
Nilox FOOLISH Manual de usuario
Nilox
Nilox FOOLISH Manual de usuario
Nilox
Nilox EVO F-60 Manual de usuario
Nilox
Nilox F60 Reloaded Manual de usuario
Nilox
Nilox DOC KART Manual de usuario
Nilox
Nilox EVO 4KS+ Manual de usuario
Nilox
Nilox MINI F Wi-Fi Manual de usuario
Nilox
Nilox EVO MM93 Manual de usuario
Nilox
Nilox EVO4K Manual de usuario
Nilox
Nilox MINI Manual de usuario
Nilox
Nilox F60 Reloaded Manual de usuario
Nilox
Nilox EVO360 Manual de usuario
Nilox
Nilox MINI WI-FI Manual de usuario
Nilox
Nilox 4K HOLIDAY Manual de usuario
