NIKOLA T. LAB ICOPY-X Manual de usuario

Instruction

Manual

UK Version

iCopy-XS

LEGALESE

trademarks or registered trademarks of NIKOLA T.LAB and/or affiliated

companies worldwide. All other trademarks and trade names mentioned

herein may be trademarks of their respective companies. Nikola T. Lab

("Nikola T.") may have copyright, trademarks, trade secrets, patents, patent

applications, or other intellectual property rights (whether regis-tered or

unregistered) concerning the product in this guide.Furnishing of this guide

does not give you a license to any such copyright, trademark, patent or

other intellectual property right. The ICOPY-X (the "product") may differ

from pictures whether on the packaging or otherwise. Nikola T. assumes no

responsibility for such differences or for any errors that may appear.

Information contained herein is subject to change without notice.

LIMITED PRODUCT WARRANTY

For the latest and current terms of the Limited Product

Warranty, please visit www.icopy-x.com/warranty

LIMITED LIABILITY

NIKOLA T. LAB shall in no event be liable for any lost profits, loss of

information or data, special, incidental, indiret, punitive or consequential or

incidental damages, araising in any way out of distribution of, sale of, resale

of, use of, inability to use the Product. In no event shall Nikola T. Lab's

liability exceed the retail purchase price of the Product.

GENERAL

These terms shall be governed by and construed under the laws of the

jurisdiction in which the Product was purchased. If any term herein is held

to be invalid or unenforceable, then such term (in so far as it is invalid or

unenforceable) shall be given no effect and deemed to be excluded without

invalidating any of the remaining terms. Nikola T. reserves the right to

amend any term at any time without notice.

LET'S GET YOU COVERED

You have a great device in your hands complete with 1-year limited

warranty coverage. Now maximize its potential and score exclusive Nikola

T. Lab benefits by registering at nikola-lab.com/registration.

EXPLORING YOUR ICOPY-X

Charging Port

Arrow Keys & Enter

Buttons

Display Screen

Left Select Button

Right Select Button

Power / Cancel /

One Button Auto Copy

Force Reset Button

(Scan / Read / Write)

RFID Card

Placement Area

USB charging port: This machine uses a TYPE C interface,use the distri-

bution data cable to connect to the adapter or computer USB port to start

charging. The battery icon will turn green when fully charged.

Display screen: Use for display content

Left selection button: Used to select the function prompted at the bottom

left corner of the screen.

Right selection button: Used to select the function prompted at the

bottom left corner of the screen.

Direction buttons: Used to select items up, down, left, and right.

Confirm button: Used to confirm the selected item.

Scan/read card/write card button: One-key automatic copy button, press

it to quickly return to the "AUTO COPY" page.

Cancel/Switch/Reset button: used to return to the previous page, cancel

the operation, long press for 3 seconds to turn on,and long press for 3

seconds to turn off. Long press for 15 seconds to force reset.

EXPLORING YOUR ICOPY-X

The different

RFID Areas of the

iCopy-X

RFID Card Placement Area:

The red area as shown in the figure is the 125k low-frequency

card identification area. If it is a small keyfob card, it is recommended to

put the card in the red area of the transparent cover for the operation.

The blue area as shown above is the 13.56mhz high frequency card

identification area. If it is a keyfob size card, it is recommended to put the

card in the blue area of the transparent cover for operation.If it is a full-

size white card, it can be placed directly on the transparent cover or read

on the back.

TIP: The transparent cover is used to hold key fobs and small size cards

so they will not slide whilst reading. This also enables you to carry the

iCopy-X around whilst reading or decrypting

GETTING STARTED

USING ICOPY-X

1. Auto Copy

Automatic scanning, reading and writing of all information from the

original RFID Tag to a new UID card/tag.

2. Scan Tag

Scanning of tag and getting the basic information of the tag type.

3. Read Tag

Reading of all available information of tag (including blocks and sectors).

4.Sniff Traffic

Sniffing of locked sector keys for MIFARE cards/tag.

5. Simulation

Simulation of LF and HF RFID tags.

6. PC-MODE

Enters PC-Mode, used with the supplied USB cable for advanced

command line functions and Mifare cracking

7.Backlight

Switches the screen backlight between Low, Middle and High

8. Diagnosis

Diagnosis has two modes: User Test: Checks internal memory and

LF/HF antennas. Factory Test: Used by the factory pre-sale

9. Volume

To adjust voice prompts and button volume

10. About

Displays the Serial Number, Firmware and Hardware information.

CLONING 101 ON ICOPY-X

How to quickly copy a token:

Step 1: Place the original token in the correct position on the device.

Step 2: Click the "S/R/W" button or select "Auto Copy" in the

menu to start the automatic copy process.

Step 3: When the prompt "Read successful!" appears, replace the

original token with the UID token.

Step 4: Clicking the "S/R/W" button again will automatically write the

new token.

Step 5: When the prompt "Write and verify successful!" appears,

it means that you have copied a token successfully.

TIP: When encountering an unsupported token, you will not be able to

proceed to the next step. Some tokens with encryption will

automatically prompt multiple options.

Option 1: Go to the reader to sniff keys.(Take the original token to the

token reader to sniff, obtain the secret key, and assist in reading the

token)

Option 2: Enter known keys manually.(Enter a known secret key to

assist in reading the token)

Option 3: Force read to get partial data.(Ignore the encrypted sector,

read only the unencrypted area to

make a copy token), this is unlikely to produce a working token.

Option 4: Go into PC Mode to perform a hard nested attack on a token.

For details about these four options, please see "Advance Use".

ADVANCE USE / PC MODE

Once connected to a windows PC via the USB Type C cable supplied.You

can access a hardnested attack to crack the unknown keys of a MIFARE

token.

Step 1: Connect to your computer and then enter PC-MODE on the

iCopy-X select Start and wait for the iCopy-X to say“PC mode

Running⋯”

Step 2: A USB flash drive will appear on the computer. Open the drive

and then right click on "AUTO-Hardnest.exe" and choose “Run as

Administrator”. A program will open and should automatically connect to

the iCopy if it doesn’t, you will need to manually connect using the

connect button and by typing in the appropriate COM port.

Step 3: Click "Read Card" and the analysis will start

automatically.

Step 4: After the analysis is completed, the password is automatically

saved you can then exit PC Mode on the iCopy -X and click "Auto Copy"

again.

TIP: If interrupted by an accidental error, click "Read Card" to reread

the card to continue from the breakpoint.Manually add frequently used

secret keys to the password library.

Step 1: On the U disk, locate the following file:

keys\mf1\mf_user_key.dic. Open it with Notepad or

Notepad++.

Step 2: Add secret keys to the list. Each secret key ends with a

carriage return. Save the file after editing. All keys added to this file will

be checked whenever a MIFARE series token is read.

Be aware, the more keys stored in the cryptographic library the

slower the scanning will be,

(1000 keys will take around 100 seconds to scan).

ADVANCE USE / PC MODE

To use the command line options in PC-MODE.

Step 1: Connect to your computer and then enter PC-MODE on the

iCopy-X select Start and wait for the iCopy-X to say “PC mode

Running⋯”

Step 2: A USB flash drive will appear on the computer.

Open the drive and then double click on "RUN.bat" This will open the

Windows Command Prompt Application.It will ask you to enter the

connected numeric COM Port for the iCopy-X. Enter it (device manager,

COM ports)

Step 3: Type help and press enter, this will bring up the first level

of commands that can be used with the iCopy-X

TIP: You can refer to the PM3 examples found online in github.com for

further commands and their usage or if you are familiar with command

line help commands you can use those.E.G. To use the sniffing function

to sniff the interaction between a genuine reader and the token. (This

will aid in advanced decryption)

Step 1: At the command prompt type: 14A Sniff mode.

Step 2: Remove the antenna protective cover and place the

antenna between the genuine reader and the token you will be

sniffing the traffic between. Swipe the token to ensure the

reader recognises it.

Step 3: Click "start".

Step 4: You may need to continually adjust the distance between the

three (Reader, iCopy-X, Token), and swipe the token multiple times at

different distances to get a good data dump.

Step 5: When you are happy that you have enough data bytes for a

complete trace, click "finish", iCopy-X will automatically start to parse the

password, display the password list.It will automatically save the

password to the dictionary library. Step 6: To view the Interaction

between reader and token click"SAVE", the trace will be saved to the

trace directory of the U disk.

Equipment maintenance and software

updates

Step 1: Enter the device SN (found under the“About”menu) on the

website and download the upgrade package to your PC.

Step 2: Connect the ICOPY-X to your computer using the supplied

USB TYPE C cable and delete any files that end in “.ipk” from the

root directory.

Step 3: Copy the newly downloaded upgrade package to the root

directory.

Step 4: Press "OK" on the second page of the "About" menu on the

ICOPY-X to start the automatic upgrade.

TIP: Ensure that the serial number has been entered correctly before

starting as this may cause the upgrade to fail.

Updating Firmware

USING iCopy-X

Please visit www.icopy-x.com/updates to download the latest firmware

Please connect iCopy-X to a computer with updated software

Note: Do not disconnect when iCopy-X is updating.

Tabla de contenidos

Manuales populares de Escáner de otras marcas

Plustek

Plustek Scanner Manual de usuario

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manual de usuario

Renkforce

Renkforce DS100-5M Manual de usuario

Image Access

Image Access WideTEK A2 Manual de usuario

Canon

Canon imageFORMULA CR-120N Manual de usuario

Fujitsu

Fujitsu FI-4860C2 Manual de usuario

GeoSlam

GeoSlam ZEB Horizon Instrucciones de instalación

Kodak

Kodak i5800 Scanner Manual de usuario

Kodak

Kodak i7300 Manual de usuario

Revopoint

Revopoint POP Manual de usuario

Fujitsu

Fujitsu fi-4860C Manual de usuario

Eddyfi Technologies

Eddyfi Technologies Floormap X Manual de usuario

Faselase

Faselase F6 Manual de usuario

Fujitsu

Fujitsu CardMinder Manual de usuario

Uniden

Uniden BC340CRS Manual de usuario

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manual de usuario

Mustek

Mustek PageExpress 4800 Pro Manual de usuario

Optex

Optex 750830 Manual de usuario