Nibe F110 Guía del usuario

Installer manual

LEK

NIBE™ F110

Heat pump

IHB GB 1540-5

231974

Quick guide

Navigation Ok button (confirm/select)

Back button (back/undo/exit)

Up/down buttons

(move/increase/reduce)

A detailed explanation of the button functions can be found on page 22.

How to scroll through menus and make different settings is described on page 23.

Increase hot water volume

true

off

To temporarily increase the amount of hot water, first press the down button to mark menu 2 (water droplet)

and then press the OK button twice. Read more about the settings on page 26.

In event of disturbances in comfort

If a disturbance in comfort of any type occurs there are some measures that can be taken before you need to

contact your installer. See page 35 for instructions.

Table of Contents

21 Important information

2Safety information

52 Delivery and handling

5Transport

5Assembly

7Supplied components

8Removing the covers

103 The Heat pump design

124 Pipe and air connections

12General pipe connections

13Dimensions and pipe connections

13Connecting cold and hot water

14Installation alternative

16General air connections

17Exhaust air duct /kitchen fan

17Ventilation flow (exhaust air)

17Adjusting ventilation (exhaust air)

185 Electrical connections

18General

18Connections

19Optional connections

206 Commissioning and adjusting

20Preparations

20Filling and venting

20Start-up and inspection

227 Control - Introduction

22Display unit

22Menu system

258 Control - Menus

25Menu 1 - ventilation

26Menu 2 - HOT WATER

28Menu 3 - INFO

29Menu 4 - MY SYSTEM

31Menu 5 - SERVICE

339 Service

33Service actions

3410 Disturbances in comfort

34Info menu

34Manage alarm

35Troubleshooting

3611 Accessories

3712 Technical data

37Dimensions and setting-out coordinates

38Technical specifications

41Energy labelling

42Electrical circuit diagram

43Index

1Table of Contents |NIBE™ F110

Safety information

This manual describes installation and service proced-

ures for implementation by specialists.

This appliance can be used by children

aged from 8 years and above and per-

sons with reduced physical, sensory or

mental capabilities or lack of experience

and knowledge if they have been given

supervision or instruction concerning

use of the appliance in a safe way and

understand the hazards involved. Chil-

dren shall not play with the appliance.

Cleaning and user maintenance shall

not be made by children without super-

vision.

Rights to make any design or technical

modifications are reserved.

©NIBE 2015.

Symbols

NOTE

This symbol indicates danger to machine or

person.

Caution

This symbol indicates important information

about what you should observe when main-

taining your installation.

TIP

This symbol indicates tips on how to facilitate

using the product.

Marking

F110 is CE marked and fulfils IP21.

The CE marking means that NIBE ensures that the

product meets all regulations that are placed on it

based on relevant EU directives. The CE mark is obligat-

ory for most products sold in the EU, regardless where

they are made.

IP21 means that objects with a diameter larger than

or equivalent to 12.5 mm cannot penetrate and cause

damage and that the product is protected against

vertically falling drops of water.

Serial number

The serial number can be found at the bottom right of

the front cover.

Serial number

Caution

Always give the product's serial number (14

digits) when reporting a fault.

Country specific information

Installer manual

This installer manual must be left with the customer.

NIBE™ F110Chapter 1 | Important information2

1 Important information

Inspection of the installation

Current regulations require the heating installation to be inspected before it is commissioned. The inspection must

be carried out by a suitably qualified person.

DateSignatureNotesDescription

✔

Ventilation, exhaust air (page 14)

Setting the ventilation flow

Exhaust air filter

Ventilation, surrounding air or outdoor air

(page 15)

Pressure drop in the system

Hot water

System vented

Electricity (page 18)

Supply connected 230 V

Circuit fuses

Earth circuit-breaker

Miscellaneous

Type of installation

3Chapter 1 | Important informationNIBE™ F110

Contact information

KNV Energietechnik GmbH, Gahberggasse 11, 4861 SchörflingAT

Tel: +43 (0)7662 8963-0 Fax: +43 (0)7662 8963-44 E-mail: mail@knv.at www.knv.at

NIBE Wärmetechnik c/o ait Schweiz AG, Industriepark, CH-6246 AltishofenCH

Tel: (52) 647 00 30 Fax: (52) 647 00 31 E-mail: inf[email protected] www.nibe.ch

Druzstevni zavody Drazice s.r.o, Drazice 69, CZ - 294 71 Benatky nad JizerouCZ

Tel: +420 326 373 801 Fax: +420 326 373 803 E-mail: [email protected] www.nibe.cz

NIBE Systemtechnik GmbH, Am Reiherpfahl 3, 29223 CelleDE

Tel: 05141/7546-0 Fax: 05141/7546-99 E-mail: inf[email protected] www.nibe.de

Vølund Varmeteknik A/S, Member of the Nibe Group, Brogårdsvej 7, 6920 VidebækDK

Tel: 97 17 20 33 Fax: 97 17 29 33 E-mail: inf[email protected] www.volundvt.dk

NIBE Energy Systems OY, Juurakkotie 3, 01510 VantaaFI

Puh: 09-274 697 0 Fax: 09-274 697 40 E-mail: inf[email protected] www.nibe.fi

NIBE Energy Systems France Sarl, Zone industrielle RD 28, Rue du Pou du Ciel, 01600 ReyrieuxFR

Tel : 04 74 00 92 92 Fax : 04 74 00 42 00 E-mail: inf[email protected] www.nibe.fr

NIBE Energy Systems Ltd, 3C Broom Business Park, Bridge Way, Chesterfield S41 9QGGB

Tel: 0845 095 1200 Fax: 0845 095 1201 E-mail: inf[email protected] www.nibe.co.uk

NIBE Energietechniek B.V., Postbus 634, NL 4900 AP OosterhoutNL

Tel: 0168 477722 Fax: 0168 476998 E-mail: inf[email protected] www.nibenl.nl

ABK AS, Brobekkveien 80, 0582 Oslo, Postadresse: Postboks 64 Vollebekk, 0516 OsloNO

Tel. sentralbord: +47 23 17 05 20 E-mail: [email protected] www.nibeenergysystems.no

NIBE-BIAWAR Sp. z o. o. Aleja Jana Pawła II 57, 15-703 BIAŁYSTOKPL

Tel: 085 662 84 90 Fax: 085 662 84 14 E-mail: sekretariat@biawar.com.pl www.biawar.com.pl

Tel./fax +7 831 419 57 06 E-mail: [email protected] www.nibe-evan.ru

NIBE AB Sweden, Box 14, Hannabadsvägen 5, SE-285 21 MarkarydSE

Tel: +46-(0)433-73 000 Fax: +46-(0)433-73 190 E-mail: inf[email protected] www.nibe.se

For countries not mention in this list, please contact Nibe Sweden or check www.nibe.eu for more information.

NIBE™ F110Chapter 1 | Important information4

Transport

F110 should be transported and stored vertically in a

dry place. However. the F110 may be carefully laid on

its back when being moved into a building. The centre

of gravity is in the upper part.

-2

HMflow

49(50)°C

Hotwater

51°C

-2

HMflow

49(50)°C

Hotwater

51°C

Assembly

■Position F110 on a firm base that can take the weight,

preferably on a concrete floor or foundation. Use the

product's adjustable feet to obtain a horizontal and

stable set-up.

30 - 50 mm

15 - 40 mm

■The area where F110 is located must be equipped

with floor drainage.

■F110 must be positioned with the back towards a

wall. Install F110 with its back to an outside wall,

ideally in a room where noise does not matter, in

order to eliminate noise problems. If this is not pos-

sible, avoid placing it against a wall behind a bed-

room or other room where noise may be a problem.

■Wherever the unit is located, walls to sound sensitive

rooms should be fitted with sound insulation.

■Route pipes so they are not fixed to an internal wall

that backs on to a bedroom or living room.

5Chapter 2 | Delivery and handlingNIBE™ F110

2 Delivery and handling

Installation area

Leave a free space of 800 mm in front of the heat

pump. Approx. 50 mm free space is required on each

side, to remove the side panels. The panels do not need

to be removed during service, all service can be carried

out from the front. Leave space between the heat

pump and the wall behind (and any routing of supply

cables and pipes) to reduce the risk of any vibration

being propagated.

800

300

10-25

10-50* 10-50*

* Depending on whether the panels can be removed or not.

NOTE

Ensure that there is sufficient space (300 mm)

above F110 for installing ventilation hoses.

50 50

700

300

10-25

NIBE™ F110Chapter 2 | Delivery and handling6

Supplied components

Location

The kit of supplied items is placed in the lower section

of the product.

Mora kniv

LEK

SilencerFilter cartridge

Air connection

7Chapter 2 | Delivery and handlingNIBE™ F110

Removing the covers

Air treatment hatch

LEK

1. Slacken off the screws for the securing plate above

F110.

2. Slide the hatch upwards and pull it towards you.

3. Pull the hatch towards yourself.

NOTE

A ground cable is installed in the hatch, it can

therefore only be lifted out 0.35 m. If the hatch

needs to be removed completely, the cable

must be detached.

Front cover

Remove the front hatch by pulling it straight out.

LEK

NOTE

A display cable is installed in the hatch, it can

therefore only be lifted out 1.5 m. If the hatch

needs to be removed completely, the cable

must be detached.

NIBE™ F110Chapter 2 | Delivery and handling8

Otros manuales para F110

Tabla de contenidos

Otros manuales de Bomba de calor de Nibe

Manuales populares de Bomba de calor de otras marcas

MICROWELL

MICROWELL HP 1000 GREEN Manual de usuario

Sanyo

Sanyo SAP120FCH Manual de usuario

Daikin

Daikin EHYHBH05AA Manual de usuario

Panasonic

Panasonic WH-SDF03E3E5 Guía

Bryant

Bryant 544B Manual de usuario

Airxcel

Airxcel 45000 Series Manual

Mitsubishi Electric

Mitsubishi Electric PUZ-SWM60VAA Manual de usuario

Dimplex

Dimplex LI 16I-TUR Guía del usuario

Carrier

Carrier WSHP Open v3 Guía de configuración rápida

TGM

TGM CTV14CN018A Manual de usuario

Carrier

Carrier 38MGQ Series Manual de usuario

Kokido

Kokido K2O K880BX/EU Guía de solución de problemas

Viessmann

Viessmann VITOCAL 300-G PRO Type BW 2150 Guía rápida

Carrier

Carrier 48EZN Manual de usuario

Viessmann

Viessmann KWT Vitocal 350-G Pro Series Instrucciones de funcionamiento

Ariston

Ariston NIMBUS Manual de usuario

Weishaupt

Weishaupt WWP L 7 Guía del usuario

GE Zoneline AZ85H09EAC Manual de usuario