Nibe SMO S40 Guía del usuario
IHB EN 2016-1
431901
INSTALLER MANUAL
Control module
NIBE SMO S40
Quick guide
NAVIGATION
Browse
Scroll
Select The dots at the bot-
tom edge show
that there are more
pages.
If the menu has
several sub-menus,
you can see more
information by
dragging up or
down with your fin-
ger.
Most options and
functions are activ-
ated by lightly
pressing on the dis-
play with your fin-
ger.
Drag to the right or
left with your finger
to browse between
the pages.
Setting the indoor temperature.
Bottom floor
Temperature
HEAT
13.45 3 October
Smartguide
Yes please, take me to Smartguide.
Hi!
Your system is working properly. Do you want help making
changes?
13.45 3 October
Here, you can set the temperature in the installation's
zones.
Smartguide helps you both to view information about the
current status and to make the most common settings
easily. The information that you see depends on the
product you have and the accessories that are connected
to the product.
Product overview
PRODUCT OVERVIEW
Update
Product name
Serial number
Software
Service
13.45 3 October
Company AB
Phone number
SMOS40
01234567890123
1.0.0
Increasing hot water temperature
HOT WATER
More hot water
13.45 3 October
Here, you can find information about product name, the
product's serial number, the version of the software and
service. When there is new software to download, you
can do it here (provided that SMO S40 is connected to
myUplink).
Here, you can start or stop a temporary increase in the
hot water temperature.
This function page is only visible in installations with a
water heater.
51 Important information
5Symbols
5Serial number
6Inspection of the installation
7System solutions
82 Delivery and handling
8Mounting
9Supplied components
9Open front hatch
10Open USB cover
113 The Control Module Design
11Component positions
12List of components
134 Installing the installation
13General
14Symbol key
14Temperature sensor installation on pipe
14Fixed condensing
15Connecting air/water heat pump
15Connecting the climate system
16Cold and hot water
16Installation alternative
185 Electrical connections
18General
19Connections
27Selectable in/outputs
29Settings
306 Commissioning and adjusting
30Preparations
30Commissioning
30Commissioning with additional heating only
30Check the reversing valve
30Check selectable outputs
30Cooling mode
31Start guide
31Setting the cooling/heating curve
337 myUplink
33Specification
33Connection
33Range of services
33Mobile apps for myUplink
348 Control - Introduction
34Display unit
35Navigation
35Menu types
389 Control – Menus
38Menu 1 – Indoor climate
42Menu 2 – Hot water
44Menu 3 - Info
45Menu 4 - My system
49Menu 5 - Connection
50Menu 6 - Scheduling
51Menu 7 - Installer settings
6010 Service
60Service actions
6311 Disturbances in comfort
63Info-menu
63Manage alarm
63Troubleshooting
65Add. heat only
6612 Accessories
6813 Technical data
68Dimensions
69Technical specifications
70Energy labelling
71Electrical circuit diagram
3Table of ContentsNIBE SMO S40
Table of Contents
Symbols
NOTE
This symbol indicates danger to person or ma-
chine .
Caution
This symbol indicates important information
about what you should consider when installing
or servicing the installation.
TIP
This symbol indicates tips on how to facilitate
using the product.
Serial number
The serial number can be found on the left-hand side of
the control module and on the "Product overview" home
screen.
UN
Serial number
Caution
You need the product's ((14 digit) serial number
for servicing and support.
5Chapter 1 | Important informationNIBE SMO S40
1 Important information
Inspection of the installation
Current regulations require the heating installation to be inspected before it is commissioned. The inspection must
be carried out by a suitably qualified person.
In addition, fill in the page for the installation data in the User Manual.
DateSigna-
ture
NotesDescription
✔
Electrical connections
Communication, heat pump
Connected supply 230 V
Outside sensor
Room sensor
Temperature sensor, hot water char-
ging
Temperature sensor, hot water top
Temperature sensor, external flow
line
Temperature sensor, external return
line
Charge pump
Shuttle valve
AUX1
AUX2
AUX3
AUX4
AUX5
AUX6
AUX10
AUX11
Miscellaneous
Checking additional heater
Checking the function of the revers-
ing valve
Checking charge pump function
Completed installation check of heat
pump and associated equipment
NIBE SMO S40Chapter 1 | Important information6
System solutions
COMPATIBLE PRODUCTS
The following combinations of products are recommended for control by SMO S40.
LEK
LEK
LEK
LEK
LEK
LEK
LEK
Volume ves-
sel
Addition
Water heater
Circ. pumpAccumulator
with hot wa-
ter heater
HW control
Air/water
heat pump
Control mod-
ule
UKV 40
ELK 15
VPB 200
CPD 11-25/65
VPA 200/70
VST 05
AMS 10-6 /
HBS 05-6
SMO S40
UKV 100
UKV 200ELK 26
ELK 42
VPB 300
VPBS 300
CPD 11-25/75
VPA 300/200
VPA 450/300
AMS 10-8 /
HBS 05-12
UKV 300
VPB 500
VPAS
300/450
F2040 – 6
UKV 500
VPB 750-2
F2040 – 8
VPB 1000
F2120 – 8
VST 11
AMS 10-12 /
HBS 05-12
F2040 – 12
F2120 – 12
F2120 – 16
VPB 500
VST 20
AMS 10-16 /
HBS 05-16 VPB 750-2
VPB 1000
F2040 – 16
F2120 – 20
COMPATIBLE AIR/WATER HEAT PUMPS
In some air/water heat pumps, manufactured before or
during 2019, the circuit board must be updated in order
to be compatible with SMO S40.
Lowest compatible soft-
ware version
Air/water heat pump
v37 (AA23 communication
board)
NIBE SPLIT HBS 05
(AMS 10, HBS 05)
v129F2030
v37 (AA23 communication
board)
F2040
v561F2120
v129F2300
7Chapter 1 | Important informationNIBE SMO S40
Mounting
NOTE
For wall mounting, use screws (and any plugs)
suitable for the surface.
Use all mounting points and install SMO S40 upright flat
against the wall without any part of the control module
protruding beyond the edge of the wall.
Leave at least 100 mm free space around the control
module to facilitate access and cable routing on installa-
tion and service.
Caution
Screws for removing the front cover are
reached from underneath.
SMO S40
1. Remove the hatch, by unscrewing the screws in the
bottom edge. Angle out at the bottom edge and unhook
the cover at the upper edge.
SMO S40
2x
2. Remove the display by moving it to the left. Detach the
cable from the lower edge.
3. Mark the position of the two upper screws using a pen.
Screw in the upper two screws.
4. Hook onto SMO S40 the screws in the wall.
2x
NIBE SMO S40Chapter 2 | Delivery and handling8
2 Delivery and handling
5. Reassemble the display. Screw SMO S40 into place on
the lower edge with the two remaining screws. Supplied components
Room sensor
1 x
Outdoor temperature
sensor
1 x
LEK
Aluminium tape
LEK
Insulation tape
Temperature sensor
Cable ties
Heating pipe paste
LEK
LEK
LEK
Current sensor
Open front hatch
9Chapter 2 | Delivery and handlingNIBE SMO S40
Open USB cover
NIBE SMO S40Chapter 2 | Delivery and handling10
Otros manuales para SMO S40
3
Tabla de contenidos
Otros manuales de Sistema de control de Nibe
