NEXUSCCTV NLS Manual de usuario
1
Network Video Recorder
User manual
English
2
Contents
1 Connecting NVR ..............................................................................3
1.1 Hard Disk Installation....................................................................3
2 NVR Startup ...............................................................................................5
2.1 System Initialization.......................................................................5
2.2 Boot wizard.....................................................................................5
2.3 Preview Interface .......................................................................10
2.4 Quick adding function..............................................................11
3 NVR Menu................................................................................................12
3.1 Right click mouse........................................................................12
3.1.1 PTZ Setup............................................................................13
3.1.2 Image Color......................................................................15
3.2 Main Menu ...................................................................................15
3.3 Operate ........................................................................................16
3.3.1 Playback............................................................................16
3.3.2 Shutdown...........................................................................19
3.4 Information ...................................................................................20
3.4.1 Information........................................................................20
3.4.2 Log.......................................................................................22
3.5 Setup ..............................................................................................23
3.5.1 Camera..............................................................................23
3.5.2 Network..............................................................................26
3.5.3 Event ...................................................................................31
3.5.4 Storage...............................................................................32
3.5.5 System.................................................................................35
4 WEB Operation .......................................................................................42
4.1 Active X install..............................................................................42
4.2 IE Login...........................................................................................43
4.3 IE Login Interface........................................................................43
5 Mobile App..............................................................................................45
5.1 Mobile app...................................................................................45
3
1Connecting NVR
1.1 Hard Disk Installation
Hard Disk Installation:
⑴Loosen the fixing screw on the cover, open the cover.
⑵Align the four holes of hard disk button with hard disk mounting hole
at the button of chassis.
⑶Hold the hard disk with hand, turn over the chassis, fix the hard disk
with screw at the indicated position.
4
⑷After hard disk installed, turn over the chassis, fix the cover with screw.
Note: 1. If user requires high performance of hard disk, we recommend
the dedicated security hard disk.
2. Before replacing the hard disk, please shut off the power first
and then open the case.
5
2NVR Startup
2.1 System Initialization
After connecting the device to the display, plug in the mouse, power
cable and turn on the power switch on the rear panel, then start up the NVR.
The system initialization interface is as shown in Figure 2-1.
Figure 2-1
Notes: The insert figures in this user manual may not be the same as
what you see on display. All figures here are just for reference.
2.2 Boot wizard
After device successfully booted up, it goes to startup wizard, see
Figure 2-2. Click Cancel/Next button, you can see system goes to login
interface, see Figure 2-3.
6
Figure 2-2
Click Next button, system goes to login interface. Then select a user
name, enter the user password, select the system language. Scroll down by
using the scroll wheel on the mouse for further languages in the language
box, and click on the login button to login the system (the default username
is admin, password is 12345). See Figure 2-3.
Figure 2-3. Please notice to scroll on mouse to see more languages.
After logging in, you can go to Common interface, the basic
configuration of the device can be set. See Figure 2-4. For detailed
information, please refer to chapter 3.3.3.1.
7
Figure 2-4
Click Next button, you can go to Network interface, You can configure
the network parameters of the device. See Figure 2-5. For detailed
information, please refer to chapter 3.3.3.4.
Figure 2-5
8
Click Next button, you can go to Mode Selection interface, and you
can choose Automatic network mode or Manual mode. See Figure 2-6.
Figure 2-6
Click Next button, you can go to Remote Device interface, You can
search for and add the IPC devices. See Figure 2-7. For detailed information,
please refer to chapter 3.3.4.
Figure 2-7
Click Next button, you can go to Rec Setup interface, You can
configure the record schedule. See Figure 2-8. For detailed information,
please refer to chapter 3.3.3.3.
9
Figure 2-8
Click the OK button, the boot wizard is complete.
10
2.3 Preview Interface
After the system is fully booted, it will enter into the default preview
interface, shown in Figure 2-9.
Figure 2-9
After the device normally starts up, the default setting is to preview in
multi-screen display mode. Products with different channels has different
amount of split screens to display. On the preview interface, you can set the
appropriate date and time. On the bottom left of the screen, it shows the
recording status of each video channel or alarm status icon.
: this icon means monitoring channel is recording;
: this icon means monitoring channel is in motion detection.
Tabla de contenidos
Otros manuales de DVR de NEXUSCCTV
