Nextlevel Acoustics UM1 Manual de usuario

USER MANUAL

Limited Warranty

JS Speaker Technology LLC guarantees the UM-1 to be free of defects

for the product’s warranty period of 5 years.

The warranty period begins on the original date of shipping. The lim-

ited warranty is intended only for the original purchaser. The warran-

ty will be void if the bracket is modified in anyway or not installed cor-

rectly, Including overloading, abuse, or use for any purpose other than

specified in these directions. The UM-1 is for indoor use only and any

use outdoors will void this warranty.

JS Speaker Technology LLC is not liable for any damage or injury

caused from the use of or the inability to use our bracket. To the maxi-

mum extent permitted by applicable law, JS Speaker Technology, LLC

disclaims any responsibility for incidental or consequential damages.

Additional terms and limited warranty conditions that apply to this prod-

uct are listed on the Next Level Acoustics website at:

www.nextlevelacoustics.com/warranty.

Next Level UM-1 Bracket

Thank you for purchasing the UM-1 mounting bracket. Please read the di-

rections thoroughly and plan how the mount would be best installed for its

intended use. Failure to do so may result in Damage, Personal Injury, or

voiding the warranty. It is the installer’s responsibility to ensure all compo-

nents are properly installed. JS Speaker Technology LLC is not responsible

for any damage or injury resulting from improper mounting or use of the UM

-1 bracket.

These instructions are only a guide and the installer is responsible for the

correct and secure mounting of all associated products. Please follow all

manufactures instructions for any product being installed with the UM-1

bracket. Please note: Each Setup will be different and these directions may

not account for every situation. The person installing the bracket should have

experience mounting load bearing assemblies. For any questions or con-

cerns, please contact technical support at Next Level Acoustics at 617-237-

2875 or [email protected].

CAUTION: The UM-1 is intended for use only

within the maximum weights denoted below. Use

with heavier than the maximum weights indicated

may result in instability causing possible serious

injury or damage. Review all relevant manuals to

ensure that the setup can handle the load.

 12-15 lbs. when mounting above the TV using the stock TV stand

(max weight varies depending upon how wide the stock TV base

is)

 12-20 lbs. when mounting above the TV in conjunction with a TV

mount

 30 lbs. when mounting below the TV in conjunction with a TV

mount

DISCLAIMER: Maximum weight measures are only

guidelines and ARE NOT absolute! Use precaution

when mounting.

Specifications

 Shipping Dimensions: 22” x 4” x 4”

 Shipping Weight: 4 lbs.

 Bracket Weight: 3 lbs.

Parts Included

 (1) UM-1 Bracket Assembly (Sandwich, Vertical, Depth)

Hardware Included

 (4) #10 Nuts and (4) 1/4” Nut

 (4) #10 Bolts and (4) 1/4” Bolts

 (4) #10 5/8” Screws and washers (mounting to Elite and Fusion

products)

PLEASE READ: May require spacers between the UM-1 and TV

mount when using lower profile mounts (sub 2.75″from wall to back

of the display) due to the increased depth adjustment capabilities of this

bracket system

Mount Uses

 The UM-1 is designed and tested to mount Fusion Series Soundbars and

Elite Enclosures below the TV when using a TV mount all within weight

guidelines

 The UM-1 may be used to mount an Elite Enclosure or Fusion Series

Soundbar above the TV, but proceed with extreme caution ensuring that

the enclosure or soundbar is adequately secured to the bracket and is stable

to avoid damage or injury

How to build the UM-1 Bracket System

 Assemble the UM-1 following the Figure 1 Bracket Setup diagram

below using the provided parts and hardware

 Please note: There are left and right side parts to this assembly

(Vertical Support/Depth Support)

Height/Depth Support Adjustments

 Height Adjustment is achieved by loosening the #10 Bolts as needed

and sliding the Vertical Support up and down on the Sandwich Sup-

port. For the sturdiest setup keep the #10 Bolts as far away from each

other as possible

 The Depth Support can be adjusted by loosening the 1/4" Nuts with a

7/16” wrench. The Depth

Support can also be swapped

around to achieve additional

depth adjustment, see Figure

2 and Figure 2a for more

details

Figure 1 Bracket Setup

Depth Adjustments

 Choose the proper depth adjustment permutation to perfectly line up the

Center Speaker, Soundbar, or Enclosure with the top or bottom edge of

the TV

**You can also swap the Depth Supports to the other

side of the bracket to achieve different anchor points**

Forward adjustment when the Depth Support

has clearance to move past 0

Figure 2

Figure 2a

Tilt Adjustments

 Choose the proper tilt adjustment angle to perfectly line up the Center

Speaker, Soundbar, or Enclosure with the top or bottom edge of the TV

Mounting Basic Recommendations

 Elite Series Below the TV—Secure to the UM-1 Bracket Depth Sup-

port using two per bracket #10 5/8” long screws and associated wash-

ers per bracket (included)

 Fusion Series Soundbars Below the TV—Drill a pilot hole and se-

cure to the UM-1 bracket Depth Support using two #10 5/8” long

screws and associated washers per bracket (included)

***When mounting an Elite Enclosure or Fusion Series

Soundbar above the TV use extreme caution ensuring

that the enclosure or soundbar is adequately secured to

the UM-1 bracket to avoid damage or injury***

Attaching to the TV

When using the TV manufacturers stand

 Determine the optimal bracket placement and line the Sandwich sup-

port’s oval holes with the threaded holes on the back of your TV. Se-

cure the Sandwich Support to the back of the TV using the TV manu-

facturers recommended hardware

 If your TV has bump outs, spacers

may be needed. (Spacers are not

included)

When mounting the TV to the wall

 Mount the Sandwich Support be-

tween the TV Mount and the TV.

Make sure all 4 screws/bolts go

through the Sandwich Support and

anchor snugly into the threaded

holes on the back of the TV. Spacers

may be needed if the Sandwich Sup-

port interferes with the TV Mount.

For most dual hanger style TV

brackets spacers will not be needed

 If your TV has bump outs, spacers

may be needed. (Spacers are not

included)

** Before mounting, consult

your TV’s owner manual / TV

mount’s manual and follow

all safety precautions.

Mounting above the TV example

Mounting below the TV example

Brackets can be swapped

Otros manuales para UM1

Tabla de contenidos

Otros manuales de Soporte de TV de Nextlevel Acoustics

Nextlevel Acoustics

Nextlevel Acoustics UM1-A Manual de usuario

Manuales populares de Soporte de TV de otras marcas

Ergotron

Ergotron Neo Flex Cantilever UHD Manual de usuario

StarTech.com

StarTech.com FPCEILBTB Manual de usuario

VonHaus

VonHaus 05/038 Manual de usuario

Techlink

Techlink ECHO TV Manual de usuario

Sandstrom

Sandstrom SSTVMC12X Manual de usuario

Sony

Sony SU-WL700 Guía

ICW

ICW SCACC18 Manual de usuario

LG WM-L640V Manual de usuario

Gembird

Gembird WM-65ST-01 Manual de usuario

ERARD

ERARD FiTUP XXL 035320 Manual de usuario

PEERLESS

PEERLESS PLCK-1 Guía

Kanto

Kanto RCF180 Manual de usuario

GEM

GEM GEM GP001 Manual de usuario

Gladiator Joe

Gladiator Joe GJ0A0053 Manual de usuario

Vivotek

Vivotek AM-105 Manual de usuario

Vivo

Vivo VESA STAND-VAD1B Manual de usuario

AmazonBasics

AmazonBasics B07QG3LMG4 Manual de usuario

Secura

Secura QLF210 Manual de usuario