Nextav NX-H100 Manual de usuario
NX-H100 Manual
2
The NEXTAV WIFI Drive allows to wirelessly access
your music, videos, photos, data and stream it to
your iPad®, iPhone®, tablets, smartphones, and
notebooks – no cords or cables to tangle. With the
internal hard drive storage, there is no need to worry
about running out of space on your mobile devices
and the built-in USB 3.0 port makes the file transfer
easier and much faster.
For maximum portability, the NEXTAVTM WIFI Drive
device has a built-in rechargeable battery. Simply
plug it into any available USB port on your computer
to charge and copy your files. As simple as 1-2-3,
you are ready to enjoy your device and no waiting
needed. The portable WIFI Drive can be accessed
while the battery is charging.
Product Features
• Stream media over Wi-Fi enabled devices up to 5
users simultaneously
• Access and stream your music, videos, photos and
data using the free custom mobile app supporting
iOS and Android operating systems
• Up to 5 Hours of continuous battery life*
• Search function to locate and access your le much
faster.
• Internet access capability via the RJ45 or wireless,
supporting 802.11 b/g/n speeds
• Supports 2.5” SATA Hard Disk Drive, 9.5mm. HDD
spins down after 5 minutes of no data transfer or
3
activity. Also supports SATA SSD.
• Supports NTFS, FAT and FAT32
• Supports LAN data-shares and cross-platforms
including Windows, Mac, Linux, iOS and Android.
• Support multiple NSA, including Samba / WebDAV
• Support multiple platform client tools, including
Windows, Mac, Linux, iOS, and Android
*Battery life subject to normal usage conditions and congurations.
To function as an external hard drive, simply connect
the WIFI Drive into the computer’s available USB
port. The WIFI Drive will automatically mount on your
desktop or inside the “My Computer”.
The WIFI Drive works as an external hard drive and
charges the internal battery.
Wired mode. Connect the WIFI Drive using the RJ45
cable into the available port on the back of your
router to function as a wired Internet pass-through,
the DHCP feature of the WIFI Drive will automatically
assign an IP address to have access to the internet.
4
Wireless Mode. Wirelessly connect the WIFI Drive to
your existing wireless router to function as a wireless
Internet pass-through to have access to the internet
as illustrated below.
1. Hardware and Accessories
The NEXTAV WIFI Storage
kit includes the
following:
5
2 Product Parameters
2.1 Product Dimensions
Dimension: 127.7mm (L) X 82mm (W) X 25mm (H)
Color: Black color on body and frame.
2.2. Product Specification
CPU: Model: Ralink RT5350
Frequency: MIPS24KEc 360MHZ
Wi-Fi: Standard: 802.11 b/g/n,
Frequency: 2.4 GHZ
Speed: 72Mbps at 20MHz
150Mbps at 40MHz
Network Interface:
100Mbps Ethernet RJ45
USB Interface: Micro USB 3.0, for data
transfer and charging
Battery Capacity: 3000mAh
Power consumption:
A) Maximum (reading and writing data: 3.7W
B) Stand-by (HDD Spinning, no activity): 2.5
C) Stand-by (HDD Sleep Mode): 2.1W
2.3. Operating Temperature
The normal operating temperature of the device is
between 5-35 Degrees Celsius.
3. Minimum Hardware Requirements
• Internet Connection
• PC Operating System Requirements
Windows: XP/Vista/Windows 7
6
Mac: OS X 10.6.0 and later
Others: Fedora 12 (Linux) and late
• PC Web Browser
Windows: Supports Internet Explorer 7.0
and higher version
Mac: Supports Safari 3.0 and higher version
Others: Firefox 3.5 and higher version
• iOS: 4.0 and above
• Android: 2.3 and above
• Router or Switch
4. Product View
5. Interface
5.1. RJ45 WAN Port
A. Router/Access Point. The WIFI Drive will serve as
host. With the built-in DHCP function, it can assign
IP address to connect two or more devices through
Wi-Fi.
B. Repeater/Access Point. Allows two or more
wireless devices to communicate with each other.
7
5.2. Micro USB 3.0 Interface
The built-in Micro USB 3.0 is for faster data transfer
and charging the internal battery when connected di-
rectly into the computer’s USB port or wall chargers.
5.3. LED Panel
Power LED:
LED Off: The device is switched-off or no power
Green Color
Steady Light: Battery is fully charged
Slowly Blinking: Battery charging
Blinking Fast: Device Shutting-Down
Red Color:
Steady Light: Less than 30% available power
Blinking Fast: Will soon shut-down, must be charged
immediately
HDD LED:
LED Off: The device is switched-off or no power.
White LED:
Steady Light: Ready to use
Connected into USB 2.0 Port
Blinking: Read/Write activities
Blue LED:
Steady Light: Ready to use
Connected into USB 3.0 Port
Blinking: Read/Write activities
8
Wi-Fi LED:
Blue Color:
Flashing: Starts the Initialization process
Steady Light: Initialization process completed
Ready to use Wi-Fi signal is normal
LED Off: The device is switched-off or no power
Internet LED:
Router Mode:
Blue Color: Good signal
No LED: No connection established
Bridge Mode:
Blue Color: Good signal
No LED: No connection established
6. Hardware Installation
The Wi-Fi enclosures are shipped from our factory
without the internal hard drives included. You must
purchase and install the internal hard drive yourself.
Please follow the step-by-step 2.5” SATA hard drive
installation:
1. Open the back cover of the device.
2. Carefully install the included screws together with
the rubber shock mounts in the screw holes of the
internal hard drive as seen on the images below.
9
3. After installing the screws together with the rubber
shock mounts, carefully align and slide the hard drive
in an angle into the SATA connector. Push the hard
drive all the way in to properly secure it in place. See
the image below.
4. The screws should properly align and seated on
the screw mounts on the bottom of the enclosure.
5. Align the top cover into the grooves of the bottom
enclosure and snap it in place. Please see the image
below.
10
6. Congratulations. You may now use the device as
an external hard drive when connected directly into
the computer’s USB Port.
7. PC Client Software Installation
DOWNLOAD OUR SOFTWARE Directly from http://
www.NEXTAV.ca
Our included Client Utility software is the only
software that you will need to copy on your computer.
This software utility allows you to easily search and
look for your WIFI Drive that is connected from your
home network.
1. Copy the “NEXTAV WIFI Drive” executable le on
your PC and follow the on-screen instructions.
2. Once the copy is complete, double-click on the
“NEXTAV WIFI Drive” icon on your desktop to launch
the software utility.
Tabla de contenidos
Otros manuales de Accionamiento de CC de Nextav
Manuales populares de Accionamiento de CC de otras marcas
Vincent Associates
Vincent Associates UNIBLITZ ED12DSS Manual de usuario
EKSMA OPTICS
EKSMA OPTICS DQ-100-4 Manual de lista de piezas
Chamberlain Garog
Chamberlain Garog D Series Manual de usuario
Parker
Parker PDS Series Manual de usuario
Festo
Festo DGC G Series Guía de configuración
Binks
Binks QS-5012-1-CE Manual de usuario
ABB
ABB RSYC-01 Manual de usuario
Rockwell Automation
Rockwell Automation PowerFlex 700S Manual del propietario
WEG
WEG DeviceNet CFW500 Manual de usuario
Siemens
Siemens SINAMICS G Hoja de datos
Siemens
Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Instrucciones de funcionamiento
SOMFY
SOMFY JR RU 30 Manual de usuario