Nexmosphere XT Series Manual de usuario

1. General

The XT Push Button interface is a 4-channel push button interface with buttonLED control. Push buttons are a proven

and robust way for users to provide input and navigate through digital content. The XT Push Button interface enables you

to connect up to 4 push buttons per X-talk channel to Nexmosphere's Xperience controllers. This document provides

explanation of the available functionalities and instructions on how to install and integrate push buttons into your digital

signage installation via the XT Push Button interface.

The information in this document is created for users who are familiar with the Nexmosphere API and are able to control a

basic setup with a Nexmosphere API controller. If this is not the case yet, please read the general documentation on the

Nexmosphere serial API rst.

2. Product overview

The XT Push Button interface is available in 1 model:

Nexmosphere

Le Havre 136

5627 SW Eindhoven • The Netherlands

T+31 40 240 7070

Esupport@nexmosphere.com

PRODUCT MANUAL

XT RANGE | PUSH BUTTON INTERFACE

All content contained herein is subject to change without prior notice

Table of content

1. General 1

2. Product overview 1

3. Functionality and API commands 2

  3.1Pushbuttoninput 2

3.2 Button LED control 3

4. Installation requirements and guidelines 4

4.1 Connection Diagrams 4

4.2 Accessories - Push buttons 5

5. Settings 6

6. Quick test 6

7. Appendix 7

XT-B4N6

Interface push buttons

✔

Button LED control

✔

Cable length 180cm

The XT Push Button interface is a 4-channel push

button interface with buttonLED control. Via JST-PHR-3

connectors, the XT-B4N6 can interface any push button

to the Nexmosphere platform*. Furthermore, the interface

can control 3.3V button LEDs. It can adjust the LEDs of all

fourbuttonssimultaneouslyorseteachbuttontodierent

lighting sequences.

*Nexmosphere also oers several push buttons with pre-assembled

cable and connector. See the Accessoires section on page 5 for more

information.

XT-B4N6

1234

XT-B4

JST-PHR-3 female connectors

All content contained herein is subject to change without prior notice

Nexmosphere

Le Havre 136

5627 SW Eindhoven • The Netherlands

T+31 40 240 7070

Esupport@nexmosphere.com

PRODUCT MANUAL | XT PUSH BUTTON INTERFACE

3. Functionalities and API commands

The XT Push Button interface provides the following functionalities:

1. Push button input - connect up to 4 push buttons and detect whether these are pushed or released

2. Button LED control - control the behavior of the push button's status LED

3.1 - Interface push buttons

Up to 4 push buttons can be connected onto the XT-B4N6. When one of the connected push buttons is pushed or released,

an API command is triggered. This API message has the following format:

The following section will cover these functionalities in detail. Please note that for each API example in this document,

X-talk interface address 001 is used (X001). When the sensor is connected to another X-talk channel, replace the

"001" with the applicable X-talk address.

When implementing push button triggers, consider the

following:

• The command for a button release is the same for

all push buttons: X001A[0]. This command indicates

that the push button which was pushed last has been

released.

• When multiple push buttons on the same XT-B4N6

are pressed simultaneously, a unique command for

that combination is generated. For the complete list

ofallcombinations,pleaseseethenalpagesofthis

document (Appendix A).

X= indicates button push or release

X001A[X]

button 1 button 2 button 3 button 4

X=0 Release Release Release Release

X=3 Push - - -

X=5 - Push - -

X=9 - - Push -

X=17 - - - Push

Example commands

Push button 1 is pushed

X001A[3]

Push button 2 is pushed

X001A[5]

Push button 3 is pushed

X001A[9]

Push button 4 is pushed

X001A[17]

Push button which was pushed last is released

X001A[0]

1234

XT-B4

All content contained herein is subject to change without prior notice

Nexmosphere

Le Havre 136

5627 SW Eindhoven • The Netherlands

T+31 40 240 7070

Esupport@nexmosphere.com

PRODUCT MANUAL | XT PUSH BUTTON INTERFACE

3.2 - Button LED control

The XT Push Button interface comes with the ability

to control the LED rings of connected push buttons.

Nexmosphere oers several push button options with

controllable LEDs. For more information on these buttons,

see the Accessories section on page 5.

The XT Push Button interface can set these button LEDs

to 4 dierent states: on, o, slow blink and fast blink.

Through an API command, the LED of each button can be

settoadierentstate.However,thiscommandindicates

and sets the state for all LEDs simultaneously. This API

command has the following format:

There is a total of 256 combinations of LED outputs

available. Below, a subset of these options is listed. For the

completelistofoptions,pleaseseethenalpagesofthis

document (Appendix B).

X001A[X]

X= indicates LED output

LED 1 LED 2 LED 3 LED 4

Set all LEDs to same state

X=0 o o o o

X=85 fast blink fast blink fast blink fast blink

X=170 slow blink slow blink slow blink slow blink

X=255 on on on on

Set one LED on, others o

X=3 on o o o

X=12 o on o o

X=48 o o on o

X=192 o o o on

Set one LED o, others on

X=252 o on on on

X=243 on o on on

X=207 on on o on

X=64 on on on o

Set one LED to fast blink, others OFF

X=1 fast blink o o o

X=4 o fast blink o o

X=16 o o fast blink o

X=64 o o o fast blink

Set one LED to slow blink, others OFF

X=2 slow blink o o o

X=8 o slow blink o o

X=32 o o slow blink o

X=128 o o o slow blink

Example commands

X001A[255]

Set all LEDs on

X001A[85]

Set all LEDs to fast blink

X001A[4]

Set LED 2 to fast blink, others off

X001A[64]

Set LED 4 to off, others on

1234

XT-B4

All content contained herein is subject to change without prior notice

Nexmosphere

Le Havre 136

5627 SW Eindhoven • The Netherlands

T+31 40 240 7070

Esupport@nexmosphere.com

PRODUCT MANUAL | XT PUSH BUTTON INTERFACE

Example connection to XC Controller Example connection to XN Controller

4. Installation requirements and guidelines

When integrating push buttons with the XT Push Button interface into your digital signage installation, several installation

requirements and guidelines need to be taken into account in order for the sensor to perform optimal and operate stable.

4.1 - Connection Diagrams

The XT Push button interface can be connected to any X-talk interface and is therefore compatible with all Xperience

controllers. Make sure the XT Push Button interface is connected to the X-talk interface before powering the Xperience

controller. Otherwise, the XT Push Button interface will not be recognized by the Xperience controller and no sensor output

will be provided.

DC Power supply

1234

XT-B4

1234

XT-B4

Push buttons

Nexmosphere oers two ranges of push buttons which

can be connected to and controlled with the XT-B4N6,

the S-B90xxx premium line and the S-B95xxx Valueline

buttons. All of these buttons come with a pre-assembled

cable and connector, making them a plug&play accessory.

The part codes are:

4.2 - XT Push Button interface - Accessories

All content contained herein is subject to change without prior notice

Nexmosphere

Le Havre 136

5627 SW Eindhoven • The Netherlands

T+31 40 240 7070

Esupport@nexmosphere.com

PRODUCT MANUAL | XT PUSH BUTTON INTERFACE

Premium line, 12mm diameter:

S-B20N33/43/63

Premium line, 19mm diameter:

S-B90N33/43/63

S-B90W13/33/43/63

S-B90B33/63

S-B90G33/63

S-B90R33/63

Valueline, 19mm diameter:

S-B95N33/43/63

S-B95W13/33/43/63

S-B95B33/43/63

S-B95G33/63

S-B95R33/63

no LED, varying cable lengths*

white LED, varying cable lengths*

blue LED, varying cable lengths*

green LED, varying cable lengths*

red LED, varying cable lengths*

no LED, varying cable lengths*

white LED, varying cable lengths*

blue LED, varying cable lengths*

green LED, varying cable lengths*

red LED, varying cable lengths*

Mechanical Dimensions S-B20

Mechanical Dimensions S-B90

Mechanical Dimensions S-B95

*Cable lengths:

13 = 15cm cable, 33 = 30cm cable, 43 = 60cm cable, 63 = 180cm cable

Alternatively, for 3rd-party push buttons which don't yet

have a cable with JST-PHR-3 connector, Nexmosphere

alsooersseparatebuttoncableswhichcanbeattached

to the 3rd party push button

Button cables:

CA3-S1C

CA3-S3C

CA3-S4C

CA3-S5C

CA3-S6C

15cm, stripped end/JST connector

30cm, stripped end/JST connector

60cm, stripped end/JST connector

120cm, stripped end/JST connector

180cm, stripped end/JST connector

All content contained herein is subject to change without prior notice

Nexmosphere

Le Havre 136

5627 SW Eindhoven • The Netherlands

T+31 40 240 7070

Esupport@nexmosphere.com

PRODUCT MANUAL | XT PUSH BUTTON INTERFACE

5. Settings

The XT Push Button interface does not have any additional settings that can alter the behaviour of the element. For the API

commands regarding the behaviour of the button LEDs, please see section 3.2 on page 3.

6. Quick test

In order to test if the XT Push Button interface is installed correctly, please follow the test procedure below:

Step 1 - Setup

First, connect a push button to either of the four

button channels of the XT Push Button interface (e.g.

the S-B90W43 on channel 1). Secondly, connect the

XT Push Button interface to an Xperience controller

and power the Xperience controller.

The status LED of the controller will start to blink and

once power-up is completed will be lit continuously.

The XT Push Button interface does not have a status

LED.

Step 2 - Test

Push the button.

The status LED of the controller should blink.

For a full test we recommend to connect the setup to

a mediaplayer or PC and test all API commands listed

in this document (see section 3, page 2-3). For more

information on how to setup a test for your controller,

please see the Quick Start Guide of the Xperience

controller you are using. These are available on

nexmosphere.com/support-documentation.

Please contact support@nexmosphere.com for any

support questions you may have.

In case any of the steps above does not provide

the expected result, please check the installation

guidelines in this document.

1234

XT-B4

Connect to powered

USB port

1234

XT-B4

Connect to powered

USB port

All content contained herein is subject to change without prior notice

Nexmosphere

Le Havre 136

5627 SW Eindhoven • The Netherlands

T+31 40 240 7070

Esupport@nexmosphere.com

PRODUCT MANUAL | XT PUSH BUTTON INTERFACE

Appendix A

All available combinations of button

input commands

All content contained herein is subject to change without prior notice

Nexmosphere

Le Havre 136

5627 SW Eindhoven • The Netherlands

T+31 40 240 7070

Esupport@nexmosphere.com

PRODUCT MANUAL | XT PUSH BUTTON INTERFACE

LED 1 LED 2 LED 3 LED 4

X001A[ 0]o o o o

X001A[ 1] fast blink o o o

X001A[ 2] slow blink o o o

X001A[ 3] on o o o

X001A[ 4]o fast blink o o

X001A[ 5] fast blink fast blink o o

X001A[ 6] slow blink fast blink o o

X001A[ 7] on fast blink o o

X001A[ 8]o slow blink o o

X001A[ 9] fast blink slow blink o o

X001A[ 10] slow blink slow blink o o

X001A[ 11] on slow blink o o

X001A[ 12]o on o o

X001A[ 13] fast blink on o o

X001A[ 14] slow blink on o o

X001A[ 15] on on o o

X001A[ 16]o o fast blink o

X001A[ 17] fast blink o fast blink o

X001A[ 18] slow blink o fast blink o

X001A[ 19] on o fast blink o

X001A[ 20]o fast blink fast blink o

X001A[ 21] fast blink fast blink fast blink o

X001A[ 22] slow blink fast blink fast blink o

X001A[ 23] on fast blink fast blink o

X001A[ 24]o slow blink fast blink o

X001A[ 25] fast blink slow blink fast blink o

X001A[ 26] slow blink slow blink fast blink o

X001A[ 27] on slow blink fast blink o

X001A[ 28]o on fast blink o

X001A[ 29] fast blink on fast blink o

X001A[ 30] slow blink on fast blink o

X001A[ 31] on on fast blink o

X001A[ 32]o o slow blink o

X001A[ 33] fast blink o slow blink o

X001A[ 34] slow blink o slow blink o

X001A[ 35] on o slow blink o

X001A[ 36]o fast blink slow blink o

X001A[ 37] fast blink fast blink slow blink o

X001A[ 38] slow blink fast blink slow blink o

X001A[ 39] on fast blink slow blink o

X001A[ 40]o slow blink slow blink o

X001A[ 41] fast blink slow blink slow blink o

X001A[ 42] slow blink slow blink slow blink o

X001A[ 43] on slow blink slow blink o

X001A[ 44]o on slow blink o

Appendix B

All available combinations of button

LED control commands

All content contained herein is subject to change without prior notice

Nexmosphere

Le Havre 136

5627 SW Eindhoven • The Netherlands

T+31 40 240 7070

Esupport@nexmosphere.com

PRODUCT MANUAL | XT PUSH BUTTON INTERFACE

LED 1 LED 2 LED 3 LED 4

X001A[ 45] fast blink on slow blink o

X001A[ 46] slow blink on slow blink o

X001A[ 47] on on slow blink o

X001A[ 48]o o on o

X001A[ 49] fast blink o on o

X001A[ 50] slow blink o on o

X001A[ 51] on o on o

X001A[ 52]o fast blink on o

X001A[ 53] fast blink fast blink on o

X001A[ 54] slow blink fast blink on o

X001A[ 55] on fast blink on o

X001A[ 56]o slow blink on o

X001A[ 57] fast blink slow blink on o

X001A[ 58] slow blink slow blink on o

X001A[ 59] on slow blink on o

X001A[ 60]o on on o

X001A[ 61] fast blink on on o

X001A[ 62] slow blink on on o

X001A[ 63] on on on o

X001A[ 64]o o o fast blink

X001A[ 65] fast blink o o fast blink

X001A[ 66] slow blink o o fast blink

X001A[ 67] on o o fast blink

X001A[ 68]o fast blink o fast blink

X001A[ 69] fast blink fast blink o fast blink

X001A[ 70] slow blink fast blink o fast blink

X001A[ 71] on fast blink o fast blink

X001A[ 72]o slow blink o fast blink

X001A[ 73] fast blink slow blink o fast blink

X001A[ 74] slow blink slow blink o fast blink

X001A[ 75] on slow blink o fast blink

X001A[ 76]o on o fast blink

X001A[ 77] fast blink on o fast blink

X001A[ 78] slow blink on o fast blink

X001A[ 79] on on o fast blink

X001A[ 80]o o fast blink fast blink

X001A[ 81] fast blink o fast blink fast blink

X001A[ 82] slow blink o fast blink fast blink

X001A[ 83] on o fast blink fast blink

X001A[ 84]o fast blink fast blink fast blink

X001A[ 85] fast blink fast blink fast blink fast blink

X001A[ 86] slow blink fast blink fast blink fast blink

X001A[ 87] on fast blink fast blink fast blink

X001A[ 88]o slow blink fast blink fast blink

X001A[ 89] fast blink slow blink fast blink fast blink

All content contained herein is subject to change without prior notice

Nexmosphere

Le Havre 136

5627 SW Eindhoven • The Netherlands

T+31 40 240 7070

Esupport@nexmosphere.com

PRODUCT MANUAL | XT PUSH BUTTON INTERFACE

LED 1 LED 2 LED 3 LED 4

X001A[ 90] slow blink slow blink fast blink fast blink

X001A[ 91] on slow blink fast blink fast blink

X001A[ 92]o on fast blink fast blink

X001A[ 93] fast blink on fast blink fast blink

X001A[ 94] slow blink on fast blink fast blink

X001A[ 95] on on fast blink fast blink

X001A[ 96]o o slow blink fast blink

X001A[ 97] fast blink o slow blink fast blink

X001A[ 98] slow blink o slow blink fast blink

X001A[ 99] on o slow blink fast blink

X001A[ 100]o fast blink slow blink fast blink

X001A[ 101] fast blink fast blink slow blink fast blink

X001A[ 102] slow blink fast blink slow blink fast blink

X001A[ 103] on fast blink slow blink fast blink

X001A[ 104]o slow blink slow blink fast blink

X001A[ 105] fast blink slow blink slow blink fast blink

X001A[ 106] slow blink slow blink slow blink fast blink

X001A[ 107] on slow blink slow blink fast blink

X001A[ 108]o on slow blink fast blink

X001A[ 109] fast blink on slow blink fast blink

X001A[ 110] slow blink on slow blink fast blink

X001A[ 111] on on slow blink fast blink

X001A[ 112]o o on fast blink

X001A[ 113] fast blink o on fast blink

X001A[ 114] slow blink o on fast blink

X001A[ 115] on o on fast blink

X001A[ 116]o fast blink on fast blink

X001A[ 117] fast blink fast blink on fast blink

X001A[ 118] slow blink fast blink on fast blink

X001A[ 119] on fast blink on fast blink

X001A[ 120]o slow blink on fast blink

X001A[ 121] fast blink slow blink on fast blink

X001A[ 122] slow blink slow blink on fast blink

X001A[ 123] on slow blink on fast blink

X001A[ 124]o on on fast blink

X001A[ 125] fast blink on on fast blink

X001A[ 126] slow blink on on fast blink

X001A[ 127] on on on fast blink

X001A[ 128]o o o slow blink

X001A[ 129] fast blink o o slow blink

X001A[ 130] slow blink o o slow blink

X001A[ 131] on o o slow blink

X001A[ 132]o fast blink o slow blink

X001A[ 133] fast blink fast blink o slow blink

X001A[ 134] slow blink fast blink o slow blink

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de grabación de Nexmosphere

Nexmosphere

Nexmosphere XD Series Manual de usuario

Manuales populares de Equipo de grabación de otras marcas

KV2 Audio

KV2 Audio 500 Series Manual de usuario

Robotics Technologies

Robotics Technologies microBus-Cam II Manual de usuario

Seca

Seca 460 Manual de usuario

Cognex

Cognex MVS-8000 Series Manual de usuario

Mect

Mect MPNC006 Series Manual de usuario

Bad Caf

Bad Caf THE LEASH Manual de usuario

Strymon

Strymon NIGHTSKY Manual de usuario

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manual de usuario

Tews Technologies

Tews Technologies TPMC465 Manual de usuario

Honeywell

Honeywell Excel 50 Manual de usuario

SeaLevel

SeaLevel COMM+8.LPCI Manual de usuario

Arturia

Arturia AUDIOFUSE STUDIO Manual de usuario

Rukra

Rukra RK-1240 Manual de usuario

Samson

Samson SCOM Manual de usuario

Dynacord

Dynacord DPS260 Manual de usuario

Nice

Nice Core Manual de usuario

Pyle Pro

Pyle Pro PSS8 Manual de usuario

RF-System

RF-System TinyGate Manual de uso y cuidado