Nexigo N930AF Manual de usuario
You can download our latest manual here：
www.nexigo.com
User Manual-N930AF
Thank you for choosing the NexiGo N930AF Webcam! You are now part of an exclusive
club: the NexiGo family! It’s our job to make sure you enjoy your membership. If you
assistance. Alternatively, solutions to common problems can be found in the FAQ
section at the end of this manual. This webcam is covered by our generous 1-year
manufacturers warranty. Please visit www.nexigo.com for full warranty information.
From all of us here at NexiGo, we want to welcome you again to the family.
We thank you deeply for your trust and your business, and we know you'll
love it here. We look forward to serving you again in the near future.
Yours Sincerely
The NexiGo Team
Brand: NexiGo
Website: www.nexigo.com
Manufacturer: Nexight INC
Email: [email protected]
Tel: +1(458) 215-6088
Address: 11075 SW 11th St, Beaverton, OR 97005, US
What's in the box
1x Full HD Webcam
2x Privacy Cover
1x User Manual
Welcome ToThe NexiGo Family!
1. HD Lens
2. Noise Reduction Microphone
3. Power Indicator
4. Flexible Clip/base
5. Tripod Attachment
Video resolution
Sensor
Field of view
Image focus
Application
support
1920x1080@30fps, 1280x720@30fps, 640x480@30fps
1/2.7 inch 2.0 Megapixel CMOS image sensor
H=65 degrees
11.81 inches +
Chat software: Skype, FaceTime, Zoom, Yahoo!, Messenger, Hangout
Streaming software: Open Broadcaster Software and Xsplit
Photo or video: Using System Camera App (Camera for windows,
Photo Booth for MAC OS)
• Internet connection
• USB 2.0/USB 3.0 Port
• OS X 10.7+
• Microsoft Windows XP/7/8/10
System
requirements
Auto FocusFocus type
• Chrome OS
1.Place/Position your webcam
2.Connect the webcam to your computer using the USB cable
Note: Make sure you are connected to your network before starting the setup.
Note: If you can not use the camera within other apps, you will need to enable access.
• In Windows: Select Settings>Privacy>Camera, turn on allow apps to access your camera.
• On Mac: Select Apple menu>System Preferences>Security & Privacy>Privacy>Camera,
and select which apps you want to use the camera.
If you still have trouble connecting the Webcam, please refer to FAQ sections
starting from Page 5.
Setting UpYour Webcam
3a. View your camera: Windows
Windows users can use the Camera app, which is pre-installed with the OS. To get to the
Camera program type camera in the search bar at the bottom of the screen and press
enter.
4.Video calling requirements
(1)A computer with speakers (or a headset), a webcam and a microphone;
(2) Install video-calling application such as Skype, FaceTime, Yahoo!, Messenger, Zoom,
Hangout. As well as a USB camera and video calling applications (both callers need);
(3) Confirm that the person you want to speak with also has the necessary hardware
and the same program installed.
3b. View your camera: Mac
Mac users can use the Photo Booth app, which is pre-installed with the OS.
This will allow you to preview the camera images, capture still frames, and video clips.
To begin, select the Finder button, click Applications, and start Photo Booth.
Alternately, go to the start menu button at the bottom right corner of the screen and
left click it. Scroll through the list of programs there until you get to the "C" section,
Camera will be listed there.
To see an image from the camera in the app, you may need to select the camera
from the list of other camera devices.
At the top right or left of your screen click the cycle camera icon (the arrow chasing itself
one, not the gear) in the app menu, and keep switching until you get to the NexiGo.
Alternately, click the search button in your menu bar, type photo booth, and press return.
To see an image from the camera in Photo Booth, you may need to select the camera
from the list of attached devices in the app.
At the top of your screen, click Camera in the app menu, and select the Full HD camera
from the list of options.
Note: Focus Adjustment
Manual focus webcams: Depending on the distance between you and the webcam the
video signal from the webcam may not be in focus. You can spin the focus ring to adjust
the lens focal length.
Auto-focus webcams: Wave your hand in front of the camera, the webcam will automatically
adjust the focus to the clearest state.
To verify connectivity on Mac, click the Apple Menu (in the top left corner of your
screen) and then click About this Mac. Click on System Report from the pop-up
window that appears. The System Information window for your Mac will appear.
Navigate to the USB section and check if the webcam is listed as a connected device
(like the photo below):
Q2: How can I use my webcam to record a video?
A: For Mac OS
Please open the Photo Booth video recording application that comes with the
Mac OS system to start recording videos, taking photos or testing the webcam.
Q1: How do I know if my camera is recognized by the operating system?
A: Connect the camera to any USB2.0/3.0 port. It will take a few seconds for the camera to be
recognized after it is connected to the laptop. To ensure the camera has installed correctly,
check under Control Panel > System and Security > Device Manager.
Q3: What is the video recording frame-rate?
A: The NexiGo Webcam captures crystal clear images and can record up to 1080p/ 30fps
video in a well-lit environment. This can be affected by low bandwidth availability or low
light levels, which can drop the frame rate down to 20 fps or lower.
Q4: Why my NexiGo webcam cannot record any sound? Why do I hear echoes during
video calls?
A: In Windows: Go to Control Panel > Sound. Select the NexiGo webcam as the default
communication device for playback and recording.
There are three primary icon buttons of the Photo Booth: "continuously take four photos",
"take a photo"and "video recording". In photo mode the middle button acts as a
shutter button, press it to take a photograph. In video capture mode, press it to start
recording and press it again to stop recording.
For Windows 8/10 System:
Search "Camera" in the search bar of the "Start" menu and click the "Camera" application to
preview, record a video and test the camera. If you need to record a better quality video, you
can download and install the AMCap video recording program (download address:
https://amcap.en.softonic.com/).
If you have more than one webcam installed, or if the image does not appear immediately,
open the "Devices" menu in AMCap and select "Full HD Webcam" from the list. At the
same time, make sure to select the microphone "USB Live Camera Audio". The video signal
of the webcam will be displayed on the AMCap screen. Please do not open multiple AMCap
interfaces, this may distort the video or audio.
On Mac: Go to System Preferences > Sound. Select NexiGo webcam as the default device
for sound input and output.
In your video/audio calling application, check the audio settings and make sure that the
NexiGo webcam is selected for both the speaker and microphone. Then, check the video
settings and verify that NexiGo webcam is selected for the camera.
Q5: What can I do if the image shows abnormal color? How to adjust my image parameter,
such as brightness or contrast?
A: Please ensure that the light in your environment is free of unique tones or intense light,
such as walls/floors/other large-area non-standard light environments, including areas
with green/blue/intense light. In such environments photographed pictures are subjected
to color cast due to the lighting impact.
For Windows:
Skype:
Click Settings, select Audio & Video, then click Webcam settings.
You can adjust any image parameter you want according to your needs.
8
AMCap:
Click Options, select Video Device, then click Properties.
You can adjust any image parameter you want according to your needs.
PotPlayer：
Please download PotPlayer software on your computer and add this camera to it.
While using this camera to stream video on the PotPlayer click the Settings button, then
adjust the Brightness or other image settings. You can then use another type of software
to start a video call and the changes will carry over.
Q6: What should I do if my Windows 7computer says a driver is needed/ the webcam is
not plug & play?
A: Unfortunately, as Windows 7is no longer supported by Microsoft your PC may state
that a driver is needed or the device not recognized. Please test the webcam directly in
Skype/ Zoom. If it does not pull up in either of these apps it will not work on this system.
9
Navigate to Computer Management > Device Manager > Sound, video and game
controllers, and click to expand the menu. Locate the HD Webcam USB option, right-click
and select "Uninstall device".
Once the webcam has been uninstalled, unplug the USB cord from your computer, wait
one minute, and then plug it back into the USB port. The webcam will automatically install
the new driver when it is reinstalled. Wait one more minute, and then verify if the
microphone is working properly.
Q8: How can I use my webcam in chatting software, like Skype or FaceTime?
A: For FaceTime on Mac:
If your Mac has a built-in camera already, open the FaceTime, click Video on
the top left of your screen, and choose the name of your webcam to use it.
Q7: Why does the microphone still not work even though it is being recognized by my
Computer?
A: This could mean there is a communication issue happening between the camera and your
computer.
Otros manuales para N930AF
1
Otros manuales de Cámara web de Nexigo
Nexigo
Nexigo N970P Manual de usuario
Nexigo
Nexigo N940P Manual de usuario
Nexigo
Nexigo N60 Manual de usuario
Nexigo
Nexigo N940E Manual de usuario
Nexigo
Nexigo N680 Manual de usuario
Nexigo
Nexigo N60 Manual de usuario
Nexigo
Nexigo N930AF Manual de usuario
Nexigo
Nexigo N690 Manual de usuario
Nexigo
Nexigo N930E Manual de usuario
Nexigo
Nexigo N980P Manual de usuario
