NewTek NDI HX PTZ3 Manual de usuario

Page | i

01t

Operating Instructions

NewTek

NDI®|HX PTZ3

IP Video Camera

March 8, 2022

Trademarks: NDI, TriCaster, 3Play, TalkShow, Video Toaster, LightWave 3D, and Broadcast Minds are registered

trademarks of NewTek, Inc. MediaDS, Connect Spark, LightWave, and ProTek are trademarks and/or service

marks of NewTek, Inc. All other products or brand names mentioned are trademarks or registered trademarks of

their respective holders.

 
 
 
Page | 3 
 
 
Table of Contents 
SECTION 1 INTRODUCTION AND SETUP....................................................................................................5 
1 Overview................................................................................................................................................................................5 
2 Getting Ready ........................................................................................................................................................................5 
3 Safety Guides .........................................................................................................................................................................6 
4 Packing List.............................................................................................................................................................................7 
5 Quick Start Guide...................................................................................................................................................................7 
6 Product Features....................................................................................................................................................................8 
7 Web Configuration.................................................................................................................................................................9 
7.1 Studio Monitor ...............................................................................................................................................................9 
7.2 Logging In .....................................................................................................................................................................11 
8 Video Source........................................................................................................................................................................12 
8.1 Video Bandwidth ..........................................................................................................................................................13 
8.2 Pan, Tilt and Zoom........................................................................................................................................................13 
9 Audio Video Settings............................................................................................................................................................14 
9.1 Video ............................................................................................................................................................................14 
9.2 Exposure.......................................................................................................................................................................15 
9.3 Picture ..........................................................................................................................................................................15 
9.4 White Balance ..............................................................................................................................................................16 
9.5 Focus/PTZ .....................................................................................................................................................................16 
9.6 Encoding.......................................................................................................................................................................17 
10 Audio..................................................................................................................................................................................17 
11 Administration ...................................................................................................................................................................18 
11.1 Network Settings........................................................................................................................................................18 
11.2 Multicast.....................................................................................................................................................................19 
12 Tally....................................................................................................................................................................................20 
SECTION 2 REMOTE CONTROL & OSD.....................................................................................................21 
1 Remote Control....................................................................................................................................................................21 
2 OSD Menu............................................................................................................................................................................23 
SECTION 3 CAMERA SPECS......................................................................................................................27 

 
Page | 4 
 
1 Camera Interface .................................................................................................................................................................29 
2 Camera Dimension (MM).....................................................................................................................................................30 
3 VISCA....................................................................................................................................................................................31 
3.1 Visca In (RS232 Port) ....................................................................................................................................................31 
3.2 VISCA Network Construction........................................................................................................................................31 
3.3 Serial Port Configuration ..............................................................................................................................................32 
3.4 VISCA Protocol..............................................................................................................................................................32 
3.5 Visca Pan Tilt Absolute Value .......................................................................................................................................43 
3.6 Visca Pan Tilt Speed Value............................................................................................................................................43 
4 VISCA Over IP .......................................................................................................................................................................44 
4.1 How to use VISCA over IP.............................................................................................................................................44 
4.2 Payload Type ................................................................................................................................................................45 
4.3 Delivery confirmation...................................................................................................................................................46 
4.4 Sequence chart.............................................................................................................................................................48 
5 PELCO...................................................................................................................................................................................49 
5.1 PELCO-D Protocol Command List .................................................................................................................................49 
5.2 PELCO-P Command List ................................................................................................................................................49 
SECTION 4 ABOUT NDI®...........................................................................................................................51 
1 A ‘Video Internet’.................................................................................................................................................................51 
2 NDI Benefits.........................................................................................................................................................................52 
3 NDI Webcam Input ..............................................................................................................................................................52 
SECTION 5 END USER LICENSE AGREEMENT ...........................................................................................55 
CREDITS...................................................................................................................................................64 
 
 

Page | 5

Section 1 INTRODUCTION AND SETUP

This section explains how to connect and configure your NewTek NDI|HX-PTZ3 camera. It

also explains how to update the device, and where you can find additional NDI®software to

extend your workflow. After completing this short section, you’ll be all set to begin using

your new camera.

1.1 OVERVIEW

Thank you for purchasing this NewTek product. NewTek is proud of

its record of innovation and commitment to excellence in design,

manufacture, and superb product support.

NewTek NDI®|HX-PTZ3 is the best way to acquire live video for input

into modern production workflows. Working with the latest version

of NDI, this pan-tilt-zoom (PTZ) camera transmits full HD video

formats up to 1080p 60 directly to NDI-compatible receiving devices across the network. It is uniquely suited

for IP-based live production and streaming, and other single, and multi-camera applications to include sports

and event coverage, video conferencing, lecture capture, distance learning, media communications, and

surveillance. You can also use NDI|HX3 as an option for better video with reduced latency, using a fraction

of the bandwidth.

Your NewTek NDI|HX-PTZ3 camera delivers amazing functionality in a compact package. Prosumers and

video professionals alike will appreciate the convenience and flexibility it provides in connection with video

production and capture.

Unlike typical cameras, your PTZ3 leverages the ground-breaking benefits of the NDI-based IP workflow

supported by leading video software and hardware developers around the globe. This manual will assist

you in installing and configuring your new product.

1.2 GETTING READY

Your PTZ3 device uses the NDI®|HX protocol for audio/video transmission, and more.

To download the NDI|HX, and receive the latest version of NDI (at no cost) head over to ndi.tv/tools/ and

install the NewTek NDI Tools for Windows or Mac.

The NDI Tools will provide a very useful array of additional NDI apps, including the NDI Studio Monitor

application, which will not only display the output of your camera, but provide easy access to its settings,

through its built-in PTZ controls.

NOTE: The End User License Agreement under which you use the NDI|HX driver specifies that “you may use up

to five (5), and no more than five, copies on separate machines at one time.”

Page | 6

1.3 SAFETY GUIDES

1. Before operation, please fully read and follow all instruction in this manual. For your safety, always keep

this manual with the camera.

2. The camera power input range is 100~240V AC (50~60Hz), ensure the power supply input within this

range before powering on.

3. The camera power voltage is 12V DC, rated amperage is 2A. We suggest you use it with the original

power supply adapter supplied by the factory.

4. Please keep the power, video and control cable in a safe place. Protect all cables, especially their

connections.

5. Operational environment: -10℃~50℃, humidity less than 80%. To avoid any danger, do not put

anything inside the camera, and keep away from the corrosive liquids.

6. Avoid shock, vibration and moisture during transportation, storage and installation.

7. Do not disassemble the camera. For any service, please contact authorized technicians.

8. Video and control cables should be individually shielded, and should not be substituted with lesser

quality cables. Do not direct the camera lens towards strong light, such as the sun or other intense light

sources.

9. Use a dry soft cloth to clean the camera housing. Use only neutral non-abrasive cleaning agents.

To avoid damage to the camera lens, never use strong or abrasive cleaning agents on the camera lens. Do

not move the camera by holding the camera head. To avoid mechanical trouble, do not rotate the camera

head by hand. NEVER MOVE THE CAMERA MANUALLY WHEN IT IS POWERED ON.

10. Place the camera with the base in only a horizontal or vertical orientation (such as on a desk, wall or

ceiling).

Note: The camera's video quality may be affected by the specific frequencies emitted by the electromagnetic

filed of other devices. Never grasp the head of the camera (as shown in the drawing below) and never move

the camera by hand when it is working, the mechanism maybe destroyed.

Page | 7

1.4 PACKING LIST

To begin, let's review "what came in the box":

•NDI®|HX PTZ3 Camera

•Power Adapter

•Power Cable

•RS232 Control Cable

•Remote Controller

•User Manual

•Double-sided Adhesive

•QC Certification

1.5 QUICK START GUIDE

1. Check all cable connections before you power on.

Page | 8

2. Dial Switch Setting (on the bottom of camera). The PTZ3 default setting is 1-6 On, On, On, On, On, Off.

1.6 PRODUCT FEATURES

•Adopts most advanced American ISP, 1/2.8 inch 2.4MP sensor, providing 1080P60 full HD video

resolution.

•Big optical lens: 20x optical zoom, with 60-degree field of view.

•1080P60 video over NDI|HX, support H.264 and H.265 encoding.

•Supports Line in and Mini XLR audio input for excellent sound quality.

•Supports NewTek NDI video transmission and control.

•NDI|HX, HDMI, 3G-SDI outputs for different applications.

•White Balance, Exposure, Focus, and Iris automatic or manual control.

•Supports PoE (Power over Ethernet): a single connected CAT5/6 cable can provide the transfer of

video, control, and power needed by the camera.

•Special Focusing Algorithm: fast and precise focusing performance when zooming or moving.

•Smooth PTZ operation with accurate pan/tilt motor controls.

•128 presets supported, e.g., Exposure and White Balance parameters can be saved in presets (in

manual mode).

•Standard Sony VISCA, IP VISCA, PELCO-P, PELCO-D control protocols; IP VISCA over both TCP and

UDP.

•Daisy chaining is supported with a max of 7 cameras connected in VISCA protocol.

•Image flip function supports upside-down installation.

•Supported field upgrade for ISP and ARM.

•Support RS232/RS485 controls.

•OSD menu in English and Chinese supported. IP address can be set in OSD menu.

Dial Switch (ARM)

SW-1

SW-2

Instruction

OFF

Updating mode

OFF

Debugging mode

OFF

Undefined

Working mode

Dial Switch

SW-3

SW-4

Instruction

OFF

reserve

OFF

reserve

OFF

reserve

Dial Switch (ISP)

SW-5

SW-6

Instruction

OFF

Working mode

OFF

Working mode

OFF

Updating mode

Page | 9

1.7 WEB CONFIGURATION

Your NewTek NDI|HX PTZ3 is very easy to configure. In many installations, all you need to do is supply

power, connect a video source and your network, and you‘re ready to go.

Sometimes though, you will want to access its settings, perhaps to configure login credentials, adjust color

balance, and so on.

Note: As web browsers vary widely, you may occasionally find it necessary to delete cached files (sometimes

referred to as the browser’s “history”, "cached images and files' or "cached web content") before the display

refreshes to properly show some recent change. This can happen, for example, after a firmware update.

These settings are made available by means of a configuration webpage, which you can access from any

suitable device (i.e., one with a web browser) on the same network.

Some devices provide direct, easy access to PTZ3’s configuration webpage.

For example, when you select its NDI output as the source for a NewTek TriCaster®input, a convenient

“Configure” button is shown. Simply click it to open PTZ3’s web control page.

1.7.1 STUDIO MONITOR

Operate camera controls, monitor video, manage login credentials, and configure audio, video, and network

settings from any compatible networked device using the Web-based user interface or NDI®Studio Monitor

(NDI®Video Monitor for OS X systems).

Once you have launched NDI Studio Monitor from your start menu, a QR

code will populate providing an option for mobile management as shown in

Figure 2.

FIGURE 1

FIGURE 2

Page | 10

LOCATING YOUR CAMERA ON THE NETWORK –WINDOWS®

1. Having launched Studio Monitor, click the small menu gadget (‘hamburger’) at upper left to open the

application menu. Among other things, this menu displays all NDI sources detected on your network.

2. Shortly, you should see a new main entry named NDI-PTZ3 listed in the menu. Rolling the mouse

pointer over this label shows the individual names for the NDI output channels of any NDI-PTZ3

cameras detected on the network.

Select the newly-listed channel for the camera you wish to configure. In a few moments, its NDI video output

will appear in the Studio Monitor window.

LOCATING YOUR CAMERA ON THE NETWORK –OS X®

The process is very similar for OS X (Mac) users, but please note the slight name change to Video Monitor.

1. Having launched the Video Monitor application, use the File menu to locate a new main entry named

NDI|HX-PTZ3. Rolling the mouse pointer over this label shows the individual names for the NDI

output channels of any PTZ3 cameras detected on the network.

2. The Video Monitor application’s Settings menu shows an option near the bottom that lets you open

the Device Webpage in your system web browser. Select this item, and continue as follows.

Select the newly listed channel for the camera you wish to configure. In a few moments, its video output will

appear in the Video Monitor window.

Hint: Detection of newly-connected NDI sources can take a few moments; in network settings with a great

number of NDI sources available, a complete refresh of the source list can take a minute or even more.

FIGURE 3

Tabla de contenidos

Manuales populares de Videocámara de otras marcas

Toshiba

Toshiba CAMILEO Z100 Manual de usuario

Panasonic

Panasonic NV-VS40B Manual de usuario

Canon

Canon RC 260 Manual de usuario

Sony

Sony Handycam DCR-DVD7E Manual de usuario

Brinno

Brinno TimeLapse TLC200 Manual de usuario

JVC

JVC GR-SXM68AC Guía de inicio rápido

Panasonic

Panasonic AG-HMC152EN Manual de usuario

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p Manual de usuario

MYDLINK

MYDLINK DCS-6100LH Manual de usuario

Sony

Sony video Hi8 Handycam CCD-TR555 Manual de usuario

SECURECOM

SECURECOM V-5014B Manual de usuario

Panasonic

Panasonic HDC-SD100 Manual de usuario

Sharper Image

Sharper Image U-VIDEO Manual de usuario

JVC

JVC AA-V15EG Manual de usuario

Canon

Canon LEGRIA HV40 Manual de usuario

Sony

Sony Handycam DCR-VX2000 Manual de usuario

RCA

RCA CC616 Manual de usuario

Panasonic

Panasonic NVM40 Manual de usuario