6 7
IMPORTANT SAFETY PRECAUTIONS
1. Please read all the instructions carefully before using this product.
2. BE SURE TO unplug the power cord when cleaning LCD. Never clean it with liquid detergent or spraying detergent, but wipe it
with wet soft cloth. If it is still not clean, please use special detergent for LCD.
3. DO NOT use accessories not authorized by the manufacturer, otherwise they may incur danger.
4. When disconnecting the power cord of display or power adapter, always remember to hold the plug instead of pulling the wire to
unplug the power cord.
5. Keep the display away from water sources such as bath tub, washbasin, sink or washing machine. DO NOT place the display on
wet floor or near a swimming pool, or press LCD surface with fingers or hard objects.
6. The grooves and openings on the back and bottom of the shell are for ventilation purpose and also for guaranteeing the
reliability of the shell are for ventilation purpose and also for guaranteeing the reliability of the elements and preventing them from
overheating; in order to prevent the vents from blocking; DO NOT place the display on bed, sofa, carpet or other similar surfaces;
DO NOT place the display near to or on heat radiator or heater; DO NOT put the display into embedded device, unless it is provided
with adequate ventilating equipment.
7. Only the type of power source indicated on the nameplate applies to this display. If you have any questions on the type of power
source you use, please consult the dealer of the display or local administration of power supply.
8. For safety, the display or the power adapter is equipped with three-pin plug power cord. The third pin of this plug is for grounding,
and only applicable to socket that is correctly grounded. In case that your socket is not available for the plug, please contact
electrician to replace the socket.
9. Since there is high voltage or other risks when the shell is opened or moved, please DO NOT repair the display by yourself, but
request qualified maintenance staff to carry out.
10. In one of the following cases, please unplug the display or the power adapter and ask qualified maintenance staff for help:
a. The power cord or the plug is impaired or worn.
b. The display falls off or the shell is damaged.
c. The display is obviously abnormal.
11. Please place the display in a cool, dry and well ventilated place.
12. Store the display in temperature range of -10°C~60°C, beyond which the display may be damaged permanently.
1. Product Description
1.1 General
As a high-performance smart multi-frequency scanning display, it adopts active-matrix TFT-LED backlight liquid screen and is
controlled with MCU digital technology. With compact and thin appearance and build-in power supply, it is suitable for narrow
work space.
1.2 Packing list
Please check the following items in the packing case before installation:
• One LCD display(including the base)
• One DP cord, one power cord, one AC adaptor
• One User Manual
If any of above items is missing, please contact with the dealer.
Attention: Accessories shall be subject to the real configuration. Please keep all packing materials well for product transport in
the future.
2. Installation and Connection
2.1 Display installation
Installation instructions
• This machine should be installed adjacent to an easily pluggable AC power socket.
• For the sake of safety, we suggest that suitable wall-mounted bracket or base be used.
• In order to prevent injury, this machine shall be placed on a stable and level surface or fixed on a firm wall.
• For wall-mounting, please ask a professional to do so. Improper installation may cause instability of this machine.
• DO NOT place this machine in places with mechanical vibration.
• DO NOT place this machine in places where insects are accessible.
• DO NOT install this machine directly opposite to air-conditioner, otherwise its inner panel may be dewed and cause failure.
• DO NOT place this machine in places with strong electromagnetic field, otherwise it may be interfered by the electromagnetic
wave and get damaged.
Mounted on Wall Mounted on Base
Ventilation
• Please reserve some place as indicated in the figure around the display.
• Never cover the vents or insert any object into the shell.
• DO NOT place this machine in confined space such as book case or embedded closet, unless such space is well ventilated.
2.2 Signal line connection
Connect the signal line to output interfaces signal of DP/HDMI
signals of PC, and then connect the other end of the signal line
to the corresponding signal input port of the display.
2.3 Audio output
This machine supports earphone and external speaker
audio output.
