Newbeem Smart Outlet Manual de usuario
Newbeem Smart Outlet User Manual v2.0
www.newbeem.com
Customer service: support@newbeem.com
Page1
Newbeem
SmartOutletUser
Manual
Newbeem Smart Outlet User Manual v2.0
www.newbeem.com
Customer service: support@newbeem.com
Page2
1.
Install software
a.
ForiOSdevices,search“iPlugWi-Fi” or “newbeem” intheApple
store andinstall.
ForAndroiddevices, search “newbeem” on Google Play, and install.
Newbeem Smart Outlet User Manual v2.0
www.newbeem.com
Customer service: support@newbeem.com
Page3
2.
Install hardware
Plug smart outletintoanywalloutlet,waitfor20seconds,the userwill
see theredLEDindicatorlightturnson.IftheredLEDdoesnotturnon,
please return for replacement.
Plug in a small appliance in the Wi-Fi socket of the outlet.(with the Wi-
Fi icon below)
TheWi-Ficontrolledoutlethas a maximumpoweroutputof
200W,checkthedeviceorappliance powerratingbefore plugin,Donot
pluginadeviceoranappliance whichwillconsumemorethan200W
power.The dimmerfunctions of smartoutletwasintently designedfor
lightingsystem.
Newbeem Smart Outlet User Manual v2.0
www.newbeem.com
Customer service: support@newbeem.com
Page4
3.
Wi-Fi configuration
A.
IOSdevices:
Runthe“iPlug” appondevice,the“Device Center”pagewillshowup first.
Thiswillallowthe usertoconfigure allsmartoutletswhichhave been
pluggedin wall outlet.
Tapthequickdeviceconfigureiconattherighttopofscreen,the“Pair
newdevice” pagewillshowup,homenetworkSSIDwillbefilledin
theWI-
FIfield automatically, type in the user’s home network password.
Push the reset button on the outlet then quickly release, the WiFi
network Led will blink slowly. If the LED is still solid and does not blink
please try again.
Newbeem Smart Outlet User Manual v2.0
www.newbeem.com
Customer service: support@newbeem.com
Page5
Go back to the App and tap the “Pair Device To Join” button, the WiFi
network LED will blink fast when the WiFi configuration is received
and it will blink faster when trying to connect the user’s WiFi network
and it will turn off when it joins the user’s WiFi network successfully.
Newbeem Smart Outlet User Manual v2.0
www.newbeem.com
Customer service: support@newbeem.com
Page6
B.
Android devices:
When the user opens the App the first time, the new device page will
show up with the instruction of connecting the user’s home WiFi
network. The user ‘s home network SSID will be filled in the WI-FI field
automatically, type in the user’s home network password.
Push the reset button on the outlet then quickly release, the WiFi
network LED will blink slowly. If the LED is still solid and does not blink
please try it again.
Go back to the App and tap the “Pair Device To Join” button, the WiFi
network LED will blink fast when the WiFi configuration is received
and it will blink faster when trying to connect the user’s WiFi network.
It will turn off when it joins the user’s WiFi network successfully.
Wait for the App to show "Pair Device Successfully."
Newbeem Smart Outlet User Manual v2.0
www.newbeem.com
Customer service: support@newbeem.com
Page7
4.
BasicOperation
Tap the device name, the “Device Setting” page will open up. Type in
the Name and Location then set the timer option. The app may
require updating if there is an update. On the top of this page, the user
can turn on/off lamp by sliding the button on the right side and can
adjust the brightness of the light by sliding the brightness bar.
Newbeem Smart Outlet User Manual v2.0
www.newbeem.com
Customer service: support@newbeem.com
Page8
5.
Set timer (Optional)
On device setting page, press “Timer” on right top of the screen (a
stopwatch icon) next to the device setting, it will show the “Timer List”
page; from there the user can add a timer by pressing “+” next to
Timer List. Once “+” is pressed, it will show another page called
“Timer”, to set the timer, just change "When" section to choose a time,
set "Turn" section to ON or OFF and brightness at that time and then
choose "Repeat" section to select the desired frequency.
Newbeem Smart Outlet User Manual v2.0
www.newbeem.com
Customer service: support@newbeem.com
Page9
6.
Remote control and Amazon Echo voice control
Tap the setting icon on Device Center page (teeth wheel icon), the
setting page will show up.
Type in the user email address and password then Flip the round
button in the “Remote Control" section will enable the remote control
feature.
Note that every time when a new device is added and
configured or an existing device is removed, user needs to Disable
and Enable the "Remote Control" again to update the devices to the
server.
Newbeem Smart Outlet User Manual v2.0
www.newbeem.com
Customer service: support@newbeem.com
Page10
Once the remote control feature is enabled, user can control the smart
outlet from anywhere in the world using WiFi or Cellphone network as
well as through Amazon Echo devices.
Open Amazon Alexa App and go to "Smart Home" then "Your Smart
Home Skills" then "Enable Smart Home Skills" and search for
"newbeem" and Tap the "Newbeem Smart Outlet" and then click
"Enable Skill".
On Login page, type in the same username and password used in the
"Remote Control" section in the App. After the authentication
succeeds the Alexa App will show "Newbeem Smart Outlet has been
successfully linked" message. By press "Done", the Alexa App can
now discovery the Newbeem Smart Outltet devices.
Otros manuales para Smart Outlet
1
