Fault code list and meaning:
Failure/state table
01 err currents fault
02 err undervoltage fault
03 err Overrun fault
04 err Blocking protection
05 err Driving mos Pipe Bridge Failure
06 err Driving mos Pipe Down Bridge Fault
07 err Hall fault
08 err Overtemperature inside controller
09 err Throttle failure (Meter decision display)
10 err Brake failure (Meter decision display)
12 err Communications fault (Meter testing)
50 Enter the brake (Meter decision display)
52 Enter cruise (Meter decision display)
53 Entry into force (Meter decision display)
21 err Currents anomalies
22 err Throttle failure
23 err Motor missing phase
24 err Hall fault
25 err Brake anomaly
26: Battery undervoltage, please charge
30 err: Communications fault
Parameter setting
In setting menu: You can do settings when pressing + and
-,and entering the password 1234 on the occasion of
power on and normal work of the parking instrument,
just like SE and number 1 in the picture below. (Please
note that some types do not have password) You can set
the number password by press + and - for a short while.
You can set the next number password by pressing M
for a short while. Do the same work till entering the
correct password and coming into the interface of
setting items.
Neways Electric Suzhou Co., LTD
6
