Newacalox N-4AR-RD2 Manual de usuario
Magnetic Soldering Helping Hands
Notice
Thank you for choosing our product! To ensure proper and safe functioning of the product,
please read the manual carefully before use. Please always follow these instructions for
safe usage.
If you have any questions about the product or experience any problems, please contact
us by email: support@newacalox.com. We will be happy to serve you.
Keep this manual for future reference.
style 2 Technical information
Model
N-4AR-RD2/N-4AR-5C
Color
Red
Base Material
Iron
Base Dimension
23*15 cm(9.05”x5.9”)
Base Weight
2.6 Lbs
Base Thickness
4.2mm
Universal Joint Pipe Material
Iron
Universal Joint Pipe Length
310/150mm(12.2”/5.9”)
Absorption
Magnetic
Packaging contents
Iron Base
1 piece
PCB Board Fixed Clips
1 piece
Universal Joint Pipe（150mm/310mm）
4 piece
Alligator Clips
1 piece
Pcb board holder
1 piece (style 1 none)
PCB Board holding Clips
4 pieces (style 1 none)
Non-slip Rubber Feet
4 pieces
Warning
Compare the parts with the package contents. If you are missing a part, please contact us.
☒Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children. Do not dispose of the packing materials until the
product is installed.
☒When picking up the auxiliary hand, pay attention to hold it firmly, so as not to fall off and
hurt.
☒Please keep the surface clean and dry when using it. Moisture or debris will reduce the
suction
Troubleshoot
Failure phenomenon
Causes
Elimination method
alligator clip falls off
The clamped data board
exceeds the weight that the
clamp can bear
Reduce the weight
The screw of the alligator
clip is loose
Tighted the screw
Alligator clip Loose
The clip is not in place
Clip more place
The product is damaged
please contact us
No suction
Magnet is missing
please contact us
Magnet is broken
Replace one,please contact
us
Operation method
1.Install the screws. Open the accessory package, take out the pattern screws, install
them on the iron pipe, and align the screw holes to tighten.
2.Easy to install.
Remove the packaging of the base, put the flexible arm on the iron plate, and you can
start your welding work.
3.360°rotation Flexible Arm,Adjustable fixed position
Take out the mother board that needs to be repaired, adjust the position and direction of
the flexible arm, and fix PCB with an alligator clip.The flexible arms have the right amount
of rigidity so they'll stay in place yet reposition easily and without any springiness.There's
a thumbscrew to change the angle of the alligator clips without having to twist the base.
4. Each of the spring clamps has thick heat shrink tubing covering the jaws, which works
like rubber protection, avoiding damage to the parts your working on.
And you can check the install video on the selling page.
Cleaning and care
1. Under no circumstances use aggressive cleanings agents, cleaning alcohol, or other
chemical solutions since these can penetrate the housing or impair functionality.
2. Clean the product with a dry, microfiber cloth
3. Should the alligator become loose, it can be easily tightened again.
Este manual sirve para los siguientes modelos
1
Otros manuales de Estación de retrabajo de Newacalox
