NEUTRIK OpticalCON Manual de usuario

CAUTION: Laser radiation, do not stare into beam!

2. Dry cleaning using FOCD-CLETOP-S-B cleaning device

2.1.

2.2.

2.3.

Follow the instructios A. 1.1. to A. 1.3.

Clean LC connectors according cleaning device

instructions

Follow the instructions A. 1.8. to A. 1.11.

1.1.

1.2.

1.3.

1.4.

1.5.

1.6.

1.7.

1.8.

1.9.

1.10.

1.11.

Disconnect both cable ends for safety reasons

Untighten the connector bushing and remove carefully

the insert of the connector housing.

Inspect the LC connectors with a fiberscope.

Fold a lint-free wipe into a square (about 4 to 8 layers

thick).

Moisten one section of the wipe with one drop of 99%

alcohol. Be sure that a portion of the wipe remains dry.

Wipe lightly the ferrule tip in the alcohol moistened

portion of the wipe with a figure "8" motion.

Immediately repeat this wiping action on the dry section

of the wipe to remove any residual alcohol.

Do not scrub the fiber against the wipe, doing so can

cause scratches.

Dispose the wipe, NEVER REUSEAWIPE.

Inspect the connector again with a fiberscope.

Repeat the process if necessary.

After the cleaning procedure slide the connector insert

back into the connector housing.

Align the key on the insert to the cutout of the metal

housing.

Tighten the bushing with a max. Torque of 500 Ncm.

Invisible laser radiation may be emitted from

disconnected fibers or connectors. Do not stare into

beams or view directly with optical instruments.

max. Torque

of 500 Ncm

Do not disassemble the OpticalCon cable connector if not necessary.

The automatic sealing shutter of the OpticalCon avoids pollution of the inside located LC connectors.

The dust proof design reduces cleaning to a minimum, if nevertheless necessary be aware that improper cleaning can cause

damage to the equipment.

99% isopropyl alcohol (IPA)

Lint-free wipes

The primary concern with using IPAis that it be removed completely from the LC connector.

If the alcohol is allowed to evaporate slowly of the ferrule, it can leave residual material on the fiber core or cladding.

Tools:

1. Wet cleaning using lint-free wipes:

ASSEMBLY INSTRUCTION

opticalCON

Fiber Optic Connection System

Page 1

Chassis connector maintenanceB.

Cleaning Tool

2.1.

2.2.

2.3.

2.4.

Wet cleaning using lint-free wipes

Dry cleaning using FOCD-SFM-125

Remove LC connectors at the rear of the Opticalcon

chassis and follow the instructions A.1.3 to A.1.9

This cleaning device is especially suggested for

female - male drums as it avoids to open the drum

for cleaning the chassis connector.

Insert the stick of the cleaning device

Make sure that the insertion position is on the

bottom of the LC connector hole in order to hit

the sealing shutter release bar.

Push the cleaning button when completely

inserted

Remove the cleaning device

2.3.

2.2.

2.1.

NEUTRIK AG

NEUTRIK Zürich AG

NEUTRIK USA Inc.

NEUTRIK UK Ltd.

T: F:

() T: F:

USA

+423 / 237 24 24 +423 / 232 53 93

+41 44 / 736 5010 +41 44 / 736 5011

+1 732 / 901 9488 +1 732 / 901 9608

+44 1983 / 811 441 +44 1983 / 811 439

Draft. Nr.: BDA 172 Update: 24..04.2009/ 3102M1421 II

www.neutrik.comwww.neutrik.com

NEUTRIK

NEUTRIK France

NEUTRIK Tokyo Ltd.

NEUTRIK

Vertriebs GmbH T: F:

T: F:

Ltd. T: F:

DE / NL / AT/DK

+49 8131 / 280 890 +49 8131 / 280 830

+33 1 / 4131 6750 +33 1 / 4131 0511

+81 3 / 3663 4733 +81 3 / 3663 4796

+852 / 2687 6055 +852 / 2687 6052

Hong Kong

ASSEMBLY INSTRUCTION I opticalCON

Tabla de contenidos

Otros manuales de Cables y conectores de NEUTRIK

NEUTRIK

NEUTRIK NAC3FX-W Manual de usuario

NEUTRIK

NEUTRIK opticalCON Manual de usuario

NEUTRIK

NEUTRIK opticalCON DRAGONFLY NKO2S-XP Series Manual de usuario

NEUTRIK

NEUTRIK NL8FC speakON Manual de usuario

NEUTRIK

NEUTRIK powerCON TRUE1 TOP Manual de usuario

NEUTRIK

NEUTRIK SpeakON SPX Series Manual de usuario

NEUTRIK

NEUTRIK Powercon NAC3FCB Manual de usuario

NEUTRIK

NEUTRIK powerCON TRUE1 TOP Manual de usuario

NEUTRIK

NEUTRIK NAO4MW-A Manual de usuario

NEUTRIK

NEUTRIK powerCON TRUE1 TOP NAC3FX-W-TOP Guía del usuario

NEUTRIK

NEUTRIK opticalCON DRAGONFLY Manual de usuario

NEUTRIK

NEUTRIK NAC3MX-W Guía del producto

NEUTRIK

NEUTRIK speakON SPX Series Manual de usuario

NEUTRIK

NEUTRIK NBNB75GLP9 Manual de usuario

NEUTRIK

NEUTRIK NL4FX Manual de usuario

NEUTRIK

NEUTRIK NAC3FX Guía del producto

NEUTRIK

NEUTRIK NAC3MX-W powerCON TRUE1 Guía del producto

NEUTRIK

NEUTRIK Dual Plug NP3TT-2 Manual de usuario

NEUTRIK

NEUTRIK FIBERFOX EBC25 Manual de usuario

NEUTRIK

NEUTRIK NC3FX-TOP Manual de usuario

NEUTRIK

NEUTRIK NP3TT-P Manual de usuario

NEUTRIK

NEUTRIK opticalCON DRAGONFLY NKO2SMW-XP Series Manual de usuario

NEUTRIK

NEUTRIK Speakon SPX Series Manual de usuario

NEUTRIK

NEUTRIK FIBERFOX NO4M4DW-FX Manual de usuario

Manuales populares de Cables y conectores de otras marcas

Philips

Philips SWA6310 Manual de usuario

StarTech.com

StarTech.com CRJ4550PK Manual de usuario

Nohau

Nohau EMUL-IP2K-PC Manual de usuario

Foxun

Foxun SX-SP144E-HD4K2K Manual de usuario

Philips

Philips SWA3305W Manual de usuario

opticis

opticis Stretch DVIM1-1P0x Manual de usuario

Volkswagen

Volkswagen VAS 6558A Manual de usuario

NEXIBO

NEXIBO N-13 Manual de usuario

CYP

CYP PU-1H3HBTL Manual de usuario

Allen-Bradley

Allen-Bradley 1784-u2dhp Manual de usuario

Global Caché

Global Caché Flex Link Blaster Manual de usuario

Hauppauge

Hauppauge USB-Live2 Manual de usuario

Fenix

Fenix MPSV 15 Manual de usuario

BEGA

BEGA 71 085 Manual de usuario

Tesla

Tesla HPWC Manual de usuario

GAMERON

GAMERON LUXURY TV CABLE Manual de usuario

molex

molex Milli-Grid Dual row 87568 Series Manual de usuario

Burndy

Burndy Continental Industries thermOweld CRE-7 Manual de usuario