Netvox Z503 Manual de usuario

ZigBeeTM- Local Commander

User Manual

Local Commander

Model: Z503

20140222

FW V4.0

HW V1.4

Table of Contents

1. Introduction.............................................................................................................................................................. 2

2. Product Appearance.................................................................................................................................................3

3. Specification.............................................................................................................................................................. 4

4. Installation.................................................................................................................................................................5

5. Setting up Z503......................................................................................................................................................... 6

5-1. Join the ZigBee Network................................................................................................................................ 6

5-2. Binding............................................................................................................................................................6

5-3. Control the Device Wirelessly........................................................................................................................7

5-4. Emergency...................................................................................................................................................... 8

5-5. Arm/Disarm Security...................................................................................................................................... 8

5-6. Store Scene......................................................................................................................................................8

5-7. Recall Scene....................................................................................................................................................8

5-8. Delete Stored Scene........................................................................................................................................ 8

5-9. Sleeping Mode................................................................................................................................................ 8

5-10. Wake up Z503...............................................................................................................................................9

5-11. Battery........................................................................................................................................................... 9

5-12. Restore to Factory Setting...........................................................................................................................10

6. Home Automation Clusters for Z503................................................................................................................... 11

7. ZiG-BUTLER......................................................................................................................................................... 13

7-1. Join Z503 into the network........................................................................................................................... 13

7-2. Bind Z503..................................................................................................................................................... 13

7-3. View Battery Status...................................................................................................................................... 17

7-4. Battery Status Report.................................................................................................................................... 18

7-5. Poll Control................................................................................................................................................... 19

8. Important Maintenance Instructions................................................................................................................... 21

1. Introduction

Netvox Z503, a ZigBee local commander, can be bound with the lighting/ curtain/ dimmer devices for users to

control these devices wirelessly. It allows people to perform the scene controls, and each button is programmable.

Z503 also equipped with an emergency button. When users ask for urgent assistance, simply push the button, and it

will send the alarm message to the command center. The Warning Device will send out alarm sound or lighting

alert for immediate help.

What is ZigBee?

ZigBee is a short range wireless transmission technology based on IEEE802.15.4 standard and supports multiple

network topologies such as point-to-point, point-to-multipoint, and mesh networks. It is defined for a

general-purpose, cost-effective, low-power-consumption, low-data-rate, and easy-to-install wireless solution for

industrial control, embedded sensing, medical data collection, smoke and intruder warning, building automation

and home automation, etc.

2. Product Appearance

Indicator

Curtain1 Up/ Shortcut7

Panic Button

Curtain1 Down

Arm Security

Scenario1

Dimmer1 Up

Dimmer1 Down

Light1/ Shortcut1

Light2/ Shortcut2

Outlet1/ Shortcut4

Scenario3

Scenario2

Dimmer2 Up

Dimmer2 Down

All Off

Timer

Light3/ Shortcut3

Outlet3/ Shortcut6

Outlet2/ Shortcut5

2nd Function/ Shortcut9

Curtain2 Up/ Shortcut8

Curtain2 Down/ Shortcut0

Disarm Security

Mode Key

3. Specification

Fully IEEE 802.15.4 compliant

Utilizes 2.4GHz ISM band; up to 16 channels

Power supply: 3V CR2032 battery

Operating consumption: Tx ≤ 43mA; Rx ≤ 28mA

Standby consumption: ≤ 1uA

Up to 280 meters wireless transmission range in non-obstacle space

Easy installation and configuration

4. Installation

This device is NOT truly waterproof/ resistant and is for indoor use.

Left: Front view

Right: Back view

Open the

battery cover

Battery Holder

Insert the

battery

The battery is

installed

Install the

battery cover

5. Setting up Z503

5-1. Join the ZigBee Network

While Z503 is under the coverage from a coordinator or a router whose permit-join feature is enabled, Z503

will be permitted to join the network.

Step1. Enable the permit-join function (valid for 60 seconds) of a coordinator or a router (please refer to

the user manual of the coordinator or the router to enable the permit-join feature).

Step2. Power on Z503. The indicator will flash once, and it starts search and join the network.

Step3. The indicator will flash 5 times after it is joined successfully. Otherwise, the indicator will stay

OFF.

Step4. After Z503 joined the network, it will start to find out CIE seciruty device. The indicator will flash

6 times after it found out. Otherwise, the indicator will flash 4 times.

5-2. Binding

Z503 can be bound with the device which supports HA On/Off Output/ HA Level Controllable Output/ HA

Mains Power Outlet/ HA On/Off Light/ HA Dimmable Light/ HA Color Dimmable Light/ HA Shade/ HA

Heating Unit/ HA Cooling Unit/ HA Pump (such as Z800/ Z801RX/ ZC01/ Curtain controller/ Dimmer

Light).

[On/Off Control]:

Step1. Press and hold either of the three or for 3 seconds to broadcast the binding request.

The indicator will flash once.

Step2. Enable the binding feature of the device which supports On/Off Control cluster.

Step3. The indicator flashes 5 times after the binding is completed; otherwise, the indicator flashes 10

times.

Each button can be bound with up to 5 devices.

[Dimmer/Curtain Control]:

Step1. Press and hold both and (Dimmer/Curtain button set) to broadcast the binding

request. The indicator will flash once.

Step2. Enable the binding feature of the device which supports Dimmer/Curtain Control cluster.

Step3. The indicator flashes 5 times after the binding is completed; otherwise, the indicator flashes 10

times.

Each button set can be bound with up to 5 devices.

[The 3rd/4th Curtain Control]:

Step1. Press . The indicator will flash once.

Step2. Press and hold both and (Curtain button set) to broadcast the binding request. The

indicator flashes once.

Step3. Enable the binding feature of the device which supports Curtain Control cluster.

Step4. The indicator flashes 5 times after the binding is completed; otherwise, the indicator flashes 10

times.

Each button set can be bound with up to 5 devices.

[HA IAS Control]:

Step1. Press and hold one for 3 seconds to broadcast the binding request. The indicator will flash

once.

Step2. Enable the binding feature of the IAS device.

Step3. The indicator flashes 5 times after the binding is completed; otherwise, the indicator flashes 10

times.

Panic button only can be bound with 1 device.

5-3. Control the Device Wirelessly

After binding with devices:

A. Press or to control the On/Off feature.

B. Press to control the Dimming-up/Rolling-curtain-up feature.

C. Press to control the Dimming-down/Rolling-curtain-down feature.

D. Press . The indicator flashes once. Then press Curtain or Curtain to control the

3rd/4th Rolling-curtain feature.

E. Press All Off to turn off all the On/Off/Dimmer devices.

F. Press once, and then press to turn off all the On/Off/Dimmer devices in 5 minutes.

Press twice within 5 seconds, and then press to turn off all the On/Off/Dimmer devices

in 15 minutes.

Press for 3 times within 5 seconds, and then press to turn off all the On/Off/Dimmer

devices in 30 minutes.

5-4. Emergency

After binding with IAS devices, press to send emergency message to the network.

5-5. Arm/Disarm Security

After finding out CIE device (please refer to 5-1. Join the ZigBee Network), users area able to arm/disarm the

security through Z503.

Arm: While the security is disarmed, press and hold for 3 seconds to arm the security. The

indicator will flash once.

Disarm: While the security is armed, press and hold for 3 seconds to disarm the security. The

indicator will flash once.

5-6. Store Scene

Press and hold the Scenario button / / for 3 seconds. The Indicator will flash once.

Z503 will save the devices status of the network. The Indicator flashes 5 times after the setting is completed;

otherwise, it will not flash.

5-7. Recall Scene

Press Scenario / / to recall scene.

5-8. Delete Stored Scene

Press and hold for 3 seconds, and the indicator will flash once. After the scene is deleted,

the indicator flashes 7 times;otherwise, it flashes 3 times.

The scene cannot be restored after deleting.

It is recommended that users delete scene when first-time use or Z503 joins a new ZigBee network.

5-9. Sleeping Mode

Z503 is designed to go into sleeping mode for power-saving in some situations:

A. When it doesn’t find a network to join → Z503 will go to sleeping mode.

B. While the device is in the network → the sleeping period is 5 minutes; it will wake up every 5

minutes to keep online.

C. Once Z503 was joined to a network and by any chance the network is no longer existed or the device

is out of the network → Z503 will wake up every 15 minutes to find the network it joined before. It

never keeps in sleeping mode and continues to find its network every 15 minutes. This condition

would consume up to 30 times power spending compared to normal-operating status. To prevent this

unwanted power consumption, we recommend that users manually power off the device.

5-10. Wake up Z503

When users would like to setup or acquire data from the device which is in sleeping mode, we have to wake

up the device. To wake up Z503, press and hold first. Meanwhile, press to wake it up. After

waking up, there will be some situations:

Z503 is in the network → the indicator will flash 5 times, and Z503 will broadcast the device

information such as IP address and IEEE address.

Z503 hasn’t joined the network → the indicator will flash once, and Z503 will start to search a network

to join.

Z503 was joined to a network and by any chance the network is no longer existed → the indicator will

flash once, and Z503 will find the network it joined before.

5-11. Battery

Low-power report: When the operating voltage is lower than 2.4V, Z503 will send a low-power report to the

CIE device. The 4 battery attributes:

BatteryVoltageMinThreshold: 2.1V

BatteryVoltageThreshold1: 2.2V

BatteryVoltageThreshold2: 2.3V

BatteryVoltageThreshold3: 2.4V

When the battery voltage is lower than the VoltageThreshold, it will send the voltage alarm code:

Lower than BatteryVoltageMinThreshold → sends the Alarmcode = 0x10

Lower than BatteryVoltageThreshold1 → sends the Alarmcode = 0x11

Lower than BatteryVoltageThreshold2 → sends the Alarmcode = 0x12

Lower than BatteryVoltageThreshold3 → sends the Alarmcode = 0x13

Users are able to use these data to check the battery status:

Power configuration cluster (ID:0x0001)

Battery voltage attribute (ID:0x0020)

Otros manuales para z503

Tabla de contenidos

Otros manuales de Mando a distancia de netvox

netvox

netvox ZigBee Z501G Manual de usuario

netvox

netvox ZigBee Z207 Manual de usuario

netvox

netvox Z501A Manual de usuario

Manuales populares de Mando a distancia de otras marcas

Panasonic

Panasonic EUR7622KB0 Manual de usuario

Bang & Olufsen

Bang & Olufsen Beo4 Manual de usuario

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manual de usuario

Multiplex

Multiplex PROFI TX 9 Manual de usuario

One Remote

One Remote RMB4 Manual de usuario

FUTABA

FUTABA 9ZAP - PART2 Manual de usuario

HR Matic

HR Matic HR MULTI 3 Manual de usuario

Yamaha

Yamaha ACC-GNRST-30-20 Manual de usuario

EisSound

EisSound KBSOUND Manual de usuario

Marantz

Marantz RC101 Manual de usuario

Conrad

Conrad FS20 TC6 Manual de usuario

Anritsu

Anritsu MP1777A Manual de usuario

Niles

Niles WVC100 Guía de solución de problemas

RCA

RCA RCU1300 Manual de usuario

Bang & Olufsen

Bang & Olufsen BEO6 Manual de usuario

GE 94901 Manual de usuario

Onbon

Onbon YQ1-75 Manual de usuario

FUTABA

FUTABA R7108SB Instrucciones de instalación

netvox z503 Manual de usuario

Manuales populares de Mando a distancia de otras marcas