1) IP address: 192.168.0.XX: the current IP address
2) Alarm Status: For example, if the signal cable disconnected, it will display Video 1 Not Lock under this menu.
Uptime: It displays the working time duration of the device. It times upon power on.
3) Video Parameters: User can enter the items respectively to check video status and input signal resolution. User can also
choose H.265/H.264 and set Video Bitrate, Low delay time, Rate Mode, H.264 Profile, and H.264 Level.
4) Audio Bit rate: Select audio bit rate among 48, 56, 64, 80, 96,112, 128, 160, 192, 224, 256, 320, 384kbps.
Audio Format: Select audio format among MPEG2, MPEG2-AAC and MPEG4-AAC.
5) Program Information: User can enable or disable the program output under menu Program Output. User can also enter
the other items to edit the Service Name, Program Name, Program Number, and PIDs of PMT, PCR, Video and Audio, and
edit LCN (Logical channel number).
6) Standard: J.83A or J.83B for choosing.
