ii
Contents continued
How to Install Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
How to identify one U-space on the mounting rail 14
Caged nuts 14
How to install and remove caged nuts 15
Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Location of bottom cable entry panels 16
Cable management hoops 16
How to Customize the Enclosure . . . . . . . . . . . . .17
How to Reverse the Door . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Procedure 17
Reverse the door handle (42U) 17
Reverse the door handle (22U) 18
Remove the door 18
Remove the hinge pin brackets, bumpers, and latch plates
19
Reinstall the hinge pin brackets 20
Reinstall the latch plate and bumpers 21
Reinstall the door assembly 22
Mounting Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Location of screws for adjusting the mounting rail 23
How to adjust the mounting rails 24
How to move the rails to a new position 24
Braces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
How to Remove the Roof . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
