Session number on receipt
The session number is now printed on the receipt line which contains the reference number. For
offline transactions, the last used session number is used.
Skip use of merchant card with merchant code
A new feature allows the merchant to override the “Use merchant card” function with a code so
that the merchant card is not required.
Whenever the terminal asks for merchant code it is possible to press STOP and enter the mer-
chant code without having to swipe the merchant card.
Scenario 1: Entering merchant menu on an iCT250E standalone terminal
1. Press menu
2. Scroll to 8 ""merchant menu""
3. Press OK
4. Terminal displays ""Swipe merchant card""
5. Press STOP (red button)
6. Terminal asks for merchant code
7. Enter merchant code + OK
8. Terminal proceeds to enter merchant menu"
Scenario 2: Entering merchant menu on an iPP350 ECR integrated terminal.
1. Press menu
2. Terminal displays ""Swipe merchant card""
3. Press STOP (red button)
4. Terminal asks for merchant code
5. Enter merchant code + OK
6. Terminal proceeds to enter merchant menu"
Note: On all merchant card protected menu, if merchant presses the stop key, terminal will ask
for a merchant code.
After entering the correct merchant code, terminal will display the menu.
Visa Floorlimit Sweden and Finland
Visa have mandated for zero floor-limit for contact chip transactions from 16. October 2015.
Sweden has a domestic rule allowing existing floor limits for domestic cards. The terminal de-
tects the country code from the chip. The chip floor limit can be registered on BIN level.
This is developed specific for Visa cards in Sweden and Finland.
Offline support is available only for Domestic cards
