Netio PowerPDU 4C Manual de usuario
1
PowerPDU 4C
&
NETIO 4
NETIO 4All
MANUAL
FIRMWARE 3.4.0
and later
27.5.2020
2
Table of Contents
Introduction .......................................................................................................... 4
1Safety notices .................................................................................................. 4
2General characteristics ....................................................................................... 5
3Specification ................................................................................................... 6
3.1 Features ........................................................................................... 6
3.2 NETIO PowerPDU 4C specifications............................................................ 7
3.3 Drawings........................................................................................... 8
3.4 NETIO 4 / 4All specifications................................................................... 9
4Configuration and control ...................................................................................10
4.1 Detecting and configuring the IP address ...................................................10
4.1.1 Initial configuration over a LAN ..................................................10
4.1.2 Initial configuration over Wi-Fi - only NETIO 4 and NETIO 4All.............. 12
4.2 Login to device web ............................................................................13
4.3 Restoring factory defaults .....................................................................13
5Web interface .................................................................................................14
5.1 Outputs ...........................................................................................14
5.1.1 General...............................................................................15
5.1.2 Scheduler/Timer....................................................................16
5.1.3 Watchdog function .................................................................17
5.1.4 Consumption metering - only NETIO PowerPDU 4C and NETIO 4All.........20
5.2 M2M API Protocols...............................................................................22
5.2.1 SNMP..................................................................................23
5.2.2 TELNET/KSHELL.....................................................................27
5.2.3 MQTT .................................................................................29
5.2.4 Serial console - NETIO PowerPDU 4C only ......................................32
5.2.5 JSON API .............................................................................34
5.2.6 XML API...............................................................................36
5.2.7 URL API ...............................................................................38
5.2.8 Modbus/TCP .........................................................................39
5.3 Cloud..............................................................................................41
5.4 Users ..............................................................................................44
5.5 Schedules.........................................................................................46
5.6 Actions (Lua scripts) ............................................................................48
5.7 Settings ...........................................................................................52
5.7.1 Network mode.......................................................................52
5.7.2 Wi-Fi settings........................................................................58
5.7.3 Network configuration .............................................................60
5.7.4 Security settings ....................................................................62
5.7.5 Date / Time .........................................................................64
5.7.6 E-mail.................................................................................65
5.7.7 Firmware update ...................................................................66
5.7.8 System................................................................................68
5.8 Log.................................................................................................70
6Controlling the outputs manually ..........................................................................71
7LED status indicators.........................................................................................71
8Acoustic indication ...........................................................................................72
9NETIO Mobile2 for Android ..................................................................................72
10 Troubleshooting...............................................................................................73
10.1 Forgotten password, restoring factory defaults............................................73
10.2 Firmware upgrade problems ..................................................................73
10.3 Fuse reset - only NETIO 4 and NETIO 4All ...................................................73
11 Application Notes (ANxx)....................................................................................74
Conclusion ...........................................................................................................75
Declaration of conformity.........................................................................................76
NETIO products overview .........................................................................................78
3
4
Introduction
Thank you for purchasing this product of NETIO products a.s. Before using your product, please read
this
User Manual
(MAN) and the included
Quick Installation Guide (QIG)
to avoid problems with
incorrect installation or use.
Caution:
The product works with mains voltage. Mishandling may damage it or result in injury or death.
1Safety notices
1. The manufacturer is not liable for any damage caused by incorrect use of the device or by
operating it in an unsuitable environment.
2. The device is not rated for outdoor use.
3. Do not expose the device to strong vibrations.
4. Unauthorized modifications may damage the device or cause a fire.
5. Protect the device from liquids and excessive temperatures.
6. Make sure the device does not fall.
7. Only electrical appliances approved for use in the electrical network may be connected to the
device.
8. Do not connect multiple devices in series.
9. The cable plug must be easily accessible.
10.The device is completely switched off only when unplugged from the wall socket.
11.If the device malfunctions, disconnect it from the electrical power supply and contact your
vendor.
5
2General characteristics
NETIO PowerPDU 4C, NETIO 4 and NETIO 4All (NETIO 4x) are the ultifunctional Power Distribution
Units (PDU). With LAN/Wi-Fi network interfaces, the output power ports for connected appliances
can be controlled over the Web interface, with our mobile app, using Lua scripts or over one of the
available open M2M API protocols.
To control the device over the Web, all you need is a web browser; NETIO 4x includes a built-in Web
server.
NETIO 4x is a designation covering several product versions with different electrical socket types. In
this manual, screenshots of the web user interface show only one socket type; the sockets of your
product may be different from the pictures herein.
This manual covers the following models:
NETIO PowerPDU 4C IEC 320 C13/C14 el. connection and metering for each socket. No Wi-Fi.
NETIO 4 Basic model with integrated Wi-Fi and electrical sockets.
NETIO 4All NETIO 4 with electricity consumption metering for each socket.
NETIO PowerPDU 4C NETIO 4 NETIO 4ALL
6
3Specification
3.1 Features
Four controlled 110/230V power outputs
Each power output has a status LED and a control button
Each output has an integrated a surge protector
After restarting or powering up the device, each output is set to its pre-configured state (ON /
OFF/ LAST – the last state before the device was powered off)
Wi-Fi interface: IEEE 802.11abgn @ 2.4GHz (secured / unsecured) - only NETIO 4 / 4All
LAN interface: 100 Mbps (NETIO PowerPDU 4C includes an integrated 2-port switch)
Robust design, metal housing
1.2m lead cable + power switch at the device (external cable for NETIO PowerPDU 4C)
Built-in web server for controlling the device, HTTPs support
Encrypted login into device configuration
User accounts with configurable access rights
User interface localized into EN, DE, ES, IT, CZ
Mobile app for controlling outputs is available for iOS and Android devices
Watchdog function for monitoring the state of connected network equipment and restarting it
if needed
Scheduler function controls the outputs according to a user-defined time schedule
Lua scripting enables system integration and customization by system integrators
M2M API - supported protocols: HTTP, HTTPS, SNMP v1/v3, XML, JSON, MQTT, Modbus/TCP, SIP
(VoIP), URL API (HTTP get)
Other supported protocols: SMTP, DNS, NTP, UPnP, DHCP
Supported security protocols: SSL, WEP, WPA, WPA2, TKIP, AES, MD5
Supported encryption protocols: DES, AES
NETIO PowerPDU 4C and NETIO 4All: Independent power measurements for each output [V, Hz,
A, W, Wh, PF (cos φ)]
NETIO PowerPDU 4C: RS-232 serial port
7
3.2 NETIO PowerPDU 4C specifications
Power 100–240 V; 50/60 Hz; 10 A
Switched outputs NETIO PowerPDU 4C: 10 [8] A total per device / 8 A per output
Internal consumption Max 4.1 W
Output relay
Micro-disconnection (µ) (resistive load)
1E5 switching cycles, max. 1.5 kV pulse voltage
Switch heat and fire resistance class 1
Electrical load
ZCS (Zero Current Switching) on each output
- Resistance load compatible
- Capacitive load compatible
- Inductive load compatible
Interfaces 2x Ethernet RJ-45 10/100 Mbit/s
1x RS-232 (green 3-pin terminal block – Rx, Tx, GND)
Environment
IP30, protection rating = class 1
Operating temperature 0–50 °C
Device rated for pollution degree 2.
Designed for continuous operation in altitudes up to 2000 m.
Does not require additional cooling
2x network interface
NETIO PowerPDU 4C features two RJ45 Ethernet jacks.
LAN SWITCH
PWR IN C14
O2
O1
O3
O4
4x IEC-320 C13
COM
RS-232
NETIO PowerPDU 4C
Power Output control
LAN1
LAN2
Figure 1. NETIO PowerPDU 4C block diagram
8
3.3 Drawings
Figure 2. NETIO PowerPDU 4C dimensions
9
3.4 NETIO 4 / 4All specifications
Power 230 V; 50 Hz; max 15 A
Switched outputs NETIO 4/4All: 15 [8] A total per device / 8 A per output
Electrical load Resistance load only
Fuse Built-in 15 A protection fuse
Internal consumption Max 4.1 W
Output relay
Micro-disconnection (µ) (resistive load)
1E5 switching cycles, max. 1.5 kV pulse voltage
Switch heat and fire resistance class 1
NETIO 4 interfaces 1x Ethernet RJ-45 10/100 Mbit/s
1x Wi-Fi 802.11b/g/n 2.4 GHz (external 2 dBi antenna)
NETIO 4All interfaces
1x Ethernet RJ-45 10/100 Mbit/s
1x Wi-Fi 802.11b/g/n 2.4 GHz (3 dBi antenna, RSMA connector)
1x Bluetooth 4.0 Low Energy 2.4 GHz (BLE) (3 dBi, RSMA connector)
Environment
IP30, protection rating = class 1
Operating temperature 0 – 50 °C
Device rated for pollution degree 2.
Designed for continuous operation in altitudes up to 2000 m.
Does not require additional cooling
10
4Configuration and control
Before the first use
1. Connect your NETIO 4x to a LAN with a network cable.
2. Connect the power cable of your NETIO 4x to a mains electrical outlet.
3. Switch your NETIO 4x on with the rocker switch at the back or on the side.
4. Allow about a minute for your NETIO 4x to start up.
System requirements (controlling system)
To be able to fully control the Netio 4x electrical sockets, the controlling system needs a web
browser (Microsoft Internet Explorer, Opera, Mozilla Firefox, Chrome or other) with enabled
JavaScript and cookies. Socket states can be changed in other ways, too; for details, see the Mobile
app and M2M API protocols sections.
4.1 Detecting and configuring the IP address
4.1.1 Initial configuration over a LAN
In order to work correctly in an IP network, the device must have a correctly configured IP address.
To find the current IP address, use the NETIO Discover utility, available for download at:
http://www.netio-products.com/en/software/netio-discover Depending on your operating system,
choose the .exe file (Windows) or the .jar file (Linux or Mac). To run the .jar file, JAVA RE is
needed. It is available for download at: www.java.com
To successfully discover the IP address, the controlling system must be in the same LAN as the
NETIO 4x device.
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Unidad de distribución de energía de Netio
