NETGEAR XAVB1601 Manual de usuario
Powerline 200 Nano PassThru (2-pack)
XAVB1601 Installation Guide
XAVB1601v2_Full_IG.book Page 1 Thursday, November 8, 2012 9:04 AM
Technical Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label of your
product and use it to register your product at https://my.netgear.com.
You must register your product before you can use NETGEAR telephone
support. NETGEAR recommends registering your product through the
NETGEAR web site.
To access the XAV1601 utility for product updates and web support, go to
http://support.netgear.com.
Phone (US only): 1-888-NETGEAR
Phone (Other Countries):
See http://support.netgear.com/general/contact/default.aspx.
Trademarks
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks
and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the
United States and/or other countries. Information is subject to change without
notice. Other brand and product names are registered trademarks or
trademarks of their respective holders. © NETGEAR, Inc. All rights reserved.
Statement of Conditions
In the interest of improving internal design, operational function, and/or
reliability, NETGEAR reserves the right to make changes to the products
described in this document without notice. NETGEAR does not assume any
liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.
XAVB1601v2_Full_IG.book Page 2 Thursday, November 8, 2012 9:04 AM
1
Contents
Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
LED Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Button Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Compatible NETGEAR Powerline Devices . . . . . . . . . . . . . . . . 7
XAVB1601v2_Full_IG.book Page 1 Thursday, November 8, 2012 9:04 AM
2
Package Contents
Powerline
XAV1601
adapters
Your adapters might look like one of these:
Ethernet
cables (2)
Resource
CD
XAVB1601v2_Full_IG.book Page 2 Thursday, November 8, 2012 9:04 AM
3
Hardware Features
Ethernet port
Power LED
Ethernet LED
Powerline LED
Security
button
Factory Reset
button
NETGEAR recommends
that you do not plug a
Powerline adapter
directly into a power strip.
XAVB1601v2_Full_IG.book Page 3 Thursday, November 8, 2012 9:04 AM
4
LED Descriptions
Item Description
Power
LED
•Solid green. The electrical power is on.
•Blinking green. The adapter is in the process of restarting
or setting up security.
•Solid Amber. The adapter is in power saving mode.
•Off. There is no electrical power.
Powerline
LED
•Solid green. The adapter is connected to a Powerline
network.
•Off. The adapter has not found any other compatible
Powerline devices using the same encryption key.
The Pick A Plug feature lets you choose the electrical outlet
with the fastest link rate, which is indicated by the LED color:
Green:
Link rate > 80 Mbps
(Fast)
Amber:
Link rate > 50 and <
80 Mbps (Medium)
Red:
Link rate < 50 Mbps
(Slow)
Ethernet
LED •Solid green. The Ethernet port is linked or data is being
transmitted.
•Off. There is no Ethernet connection
XAVB1601v2_Full_IG.book Page 4 Thursday, November 8, 2012 9:04 AM
5
Button Descriptions
Item Description
Factory
Reset
button
Press the Factory Reset button for 1 second, and release it to
return the Powerline adapter to its factory default settings.
Security
button
• After you plug in your new AV adapter, press the Security
button for 2 seconds, and then press the Security button on
one of the other AV adapters in your existing network for 2
seconds. Both buttons must be pressed within 2 minutes.
• Press the Security button for 10 seconds to put the adapter
into power saving mode. Press the Security button again
for 0.5 seconds to wake it.
Filtered
AC
Socket
The filtered AC socket can remove some electrical noise that
might affect Powerline performance. Plugging the power plugs
of nearby devices into the filtered AC socket might improve
performance.
Warning: Do not press the Security/Power button on the Powerline adapter
until installation is complete, and the adapters are communicating with each
other (indicated by the blinking Powerline LED). Pressing this button too soon
can temporarily disable Powerline communication. If Powerline
communication becomes disabled, press the Factory Reset button to return
the Powerline adapter to its factory default settings.
XAVB1601v2_Full_IG.book Page 5 Thursday, November 8, 2012 9:04 AM
6
Room 1 Room 2
XAVB1601v2_Full_IG.book Page 6 Thursday, November 8, 2012 9:04 AM
7
Compatible NETGEAR Powerline Devices
Compatible Powerline and HomePlug AV certified devices
include the NETGEAR XAVB1301, XAVB1401, XAVB2101,
XAVB2602, XAVNB2001, XAVB5601, XAVB5101, XAVB5201,
XAVB5602, XAUB2511, XAVB5004, XAVB1004, XWNB5602,
XWNB5201, and XWNB1601.
For a complete list of HomePlug AV certified devices, go to
www.homeplug.org/certified_products.
XAVB1601v2_Full_IG.book Page 7 Thursday, November 8, 2012 9:04 AM
Safety Information:
•AC input:100–125V, 0.1A (Max: NA) and 200–250V, 0.1A (Max;
others), for product only.
•Operating temperature: 0–40°C
•The socket-outlet shall be installed near the equipment and shall be
easily accessible.
•XAV1601 ratings (maximum load):
•Only power cords are allowed to be inserted into the filtered AC
outlet; no other equipment with a direct plug-in is allowed. The
power cord needs to be a maximum of 1m long and a minimum of
0.75 mm square of cross-sectional area.
•Do not plug devices into the XAV1601 filtered AC outlet that exceed
the product ratings.The output voltage of the filtered AC outlet is the
same as the power outlet into which the XAV1601 is plugged. To
help avoid damaging your system, be sure that the attached devices
are electrically rated to operate with the power available in your
location.
•If the input AC voltage is less than 125 Vac, the device plugged into
the filtered AC socket of the XAV1601 might not perform as well as
expected.
•DO NOT PLUG MAJOR HOME APPLIANCES into the filtered AC
socket or into an attached powerstrip. The device is not intended to
be used with home appliances such as air conditioners, power tools,
space heaters, fans, hair dryers, ovens, or refrigerators.
•Check the electrical current for any appliance used with the device,
and do not exceed home and product outlet ratings and electrical
requirements.
EU: 16A 250V UK: 13A 250V NA: 10A 125V
XAVB1601v2_Full_IG.book Page 8 Thursday, November 8, 2012 9:04 AM
Otros manuales para XAVB1601
2
Tabla de contenidos
Otros manuales de Adaptador de NETGEAR
NETGEAR
NETGEAR XAV5004 - POWERLINE AV 500 ADAPTER Manual de usuario
NETGEAR
NETGEAR GA511 - Gigabit Ethernet PC Card Manual de usuario
NETGEAR
NETGEAR MA111v1 - 802.11b Wireless USB Adapter Manual de usuario
NETGEAR
NETGEAR XAVB5501 Manual de usuario
NETGEAR
NETGEAR WNDA3100v3 Manual de usuario
NETGEAR
NETGEAR Powerline PLP2000 Manual de usuario
NETGEAR
NETGEAR A6150 Manual de usuario
NETGEAR
NETGEAR XAVT5601 Manual de usuario
NETGEAR
NETGEAR GA302T Manual de usuario
NETGEAR
NETGEAR PTV1000 - Push2TV - TV Adapter Manual de usuario
NETGEAR
NETGEAR Powerline 1200 Manual de usuario
NETGEAR
NETGEAR A6210 Manual de usuario
NETGEAR
NETGEAR WG111v3 - 54 Mbps Wireless USB 2.0 Adapter Manual de usuario
NETGEAR
NETGEAR HDX111 - Powerline HD Plus Ethernet Adapter Manual de usuario
NETGEAR
NETGEAR AX743 - ProSafe 10 Gigabit Ethernet Manual de usuario
NETGEAR
NETGEAR WN511B - Next Wireless Pc Card Manual de usuario
NETGEAR
NETGEAR GA311 - Gigabit PCI Adapter Manual de usuario
NETGEAR
NETGEAR XAV1301v1/XAVB1301v1 Manual de usuario
NETGEAR
NETGEAR XAV2602 Manual de usuario
NETGEAR
NETGEAR WNDA4100 Manual de usuario
