NETGEAR WNA1000M Manual de usuario
N150 Wireless Micro USB Adapter
WNA1000M Installation Guide
This guide explains Express installation with the
NETGEAR Smart Wizard and the Standalone
Windows Driver installation.
Note: For help with custom installation, see the
User Manual on the Resource CD.
Estimated completion time: 10 minutes
2
© 2010 NETGEAR, Inc. All rights reserved.
Technical Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the product
label and use it to register your product at http://www.NETGEAR.com/
register. Registration is required before you can use the telephone
support service. Registration via the NETGEAR website is strongly
recommended.
For product updates and Web support visit
http://kbserver.netgear.com.For additional information about setting
up, configuring, and using your product, see the User Manual.
Trademarks
NETGEAR, the NETGEAR logo, ReadyNAS, NeoTV, ProSafe, Smart
Wizard, and Auto Uplink are trademarks or registered trademarks of
NETGEAR, Inc. Other brand and product names are registered
trademarks or trademarks of their respective holders.
Statement of Conditions
In the interest of improving internal design, operational function, and/or
reliability, NETGEAR reserves the right to make changes to the
products described in this document without notice. NETGEAR does
not assume any liability that may occur due to the use or application of
the product(s) or circuit layout(s) described herein.
Declarations of Conformity and GPL
For complete DoC please visit the NETGEAR EU Declarations of
Conformity website at: http://kb.netgear.com/app/answers/detail/a_id/
11621. For GNU General Public License (GPL) related information,
please visit http://kbserver.netgear.com/kb_web_files/open_src.asp
This symbol is placed in accordance with the European
Union Directive 2002/96 on the Waste Electrical and
Electronic Equipment (the WEEE Directive). If disposed
of within the European Union, this product should be
treated and recycled in accordance with the laws of your
jurisdiction implementing the WEEE Directive.
3
Package Contents
Smart Wizard Installation
1. Insert the Resource CD in your computer’s
CD drive. If the CD main screen does not
display, browse the files on the CD and
double-click Autorun.exe.
2. Click Setup. The Software Update Check
screen displays.
3. If you are connected to the Internet, click
Check for Updates. If not, then click Install
from CD.
4. Accept the license agreement.
N150 Wireless Micro USB Adapter Resource CD
4
5. On the Setup Type screen, for Express
(recommended) setup, click Next.
Insert Your Adapter
You are prompted to
insert your adapter.
1. Insert the
Resource CD in
your computer’s
CD drive. If the
CD main screen
does not display,
browse the files on the CD and double-click
Autorun.exe.
Note: For best results, put the wireless adapter at
least 4 feet (1 meter) away from your router.
5
2. Click Next. The WNA1000M software
detects the adapter.
3. Follow the onscreen prompts for the
NETGEAR wizard.
Connect to a Network
You are prompted to connect to a wireless
network with one of these screens:
• WPS network: This network supports Push
'N' Connect (also called WPS). Click Next
and follow the prompts to push the WPS
button on your adapter and on your router.
Then connect without entering a password.
• No WPS: Select your wireless network from
the list and click Next. To connect to a
secure network, you must enter its
passphrase or network key.
WPS network No WPS networks
6
The adapter connects to the network, which can
take a minute or two. The Smart Wizard Settings
screen displays. Your settings are saved in a
profile, which you can name.
The icon appears in the system tray and on
the desktop. You can use it to open the Smart
Wizard to make changes or connect to a different
wireless network.
7
Standalone Driver Installation
1. Insert the
Resource CD in
your
computer’s CD
drive. If the CD
main screen
does not
display, browse
the files on the
CD and
double-click Autorun.exe.
2. Click Install Windows Standalone Driver.
The driver is installed on your computer.
3. When prompted, either insert the adapter
into a USB port on your computer, or
connect it with the USB cable that came in
the package.
Note: For best results, put the wireless adapter at
least 4 feet (1 meter) away from your router.
4. When this message displays, click Finish.
8
Connect to a Network
The screen that displays after you install the
driver depends on the Windows version on your
computer. This example shows a Windows XP
connection screen:
The icon appears in the system tray. You can
use it to make changes or connect to a different
wireless network. For help managing wireless
connections in Windows, see your Windows
documentation.
9
Troubleshooting
Adapter is not detected by the system
Symptoms:
• The LED does not light up on the adapter.
• The Found New Hardware Wizard does not come
up.
Possible Causes:
• The USB port on the computer might be faulty.
• The extension cable (if used) that connects the
USB adapter and the computer might be faulty.
• There is no driver support for the operating
system.
Resolutions:
1. Make sure you meet the minimum system
requirements for the adapter and have the latest
updates on the computer.
2. Use the latest driver for the adapter. Look for the
latest drivers on the NETGEAR download page.
3. Try a different USB port on the computer.
4. Try another device and check if it is detected.
5. Try to connect the adapter directly to the
computer without using an extension cable.
6. Try restarting the computer or try the adapter on
a different computer.
10
I can’t install drivers for my wireless adapter
Symptoms:
• You are running on Windows 7 or Vista and:
• The installation of your wireless adapter
software does not complete, most likely halting
while it is attempting to detect the adapter.
• You cannot find the Access Point (AP) or your
wireless name (SSID) in the network list.
Possible Causes:
• A firewall or antivirus software, such as
ZoneAlarm, might be interfering with driver
installation. This problem can occur when using a
NETGEAR or non-NETGEAR wireless adapter.
Resolutions:
1. Check with the firewall or antivirus software
company to see if there is an update that
addresses this issue.
2. Uninstall the driver for the wireless adapter.
3. Uninstall the firewall software.
4. Uninstall the antivirus software.
5. Install the drivers for the wireless adapter first.
6. Reinstall the firewall and antivirus software.
Otros manuales para WNA1000M
2
Tabla de contenidos
Otros manuales de Adaptador de NETGEAR
NETGEAR
NETGEAR WG111 Manual de usuario
NETGEAR
NETGEAR WG111v3 - 54 Mbps Wireless USB 2.0 Adapter Manual de usuario
NETGEAR
NETGEAR XAVB5501 Manual de usuario
NETGEAR
NETGEAR XAV5601 Manual de usuario
NETGEAR
NETGEAR MA111 Manual de usuario
NETGEAR
NETGEAR XAV1004 - Powerline AV Adapter Manual de usuario
NETGEAR
NETGEAR HDX101 - Powerline HD EN Adapter Bridge Manual de usuario
NETGEAR
NETGEAR Powerline 500 Manual de usuario
NETGEAR
NETGEAR POE101 Manual de usuario
NETGEAR
NETGEAR PTV1000 - Push2TV - TV Adapter Manual de usuario
NETGEAR
NETGEAR WNA3100 - Wireless-N 300 USB Adapter Manual de usuario
NETGEAR
NETGEAR MA111 Manual de usuario
NETGEAR
NETGEAR RangeMax WPNT511 Manual
NETGEAR
NETGEAR WPNT121 - RangeMax 240 USB 2.0 Adapter Manual de usuario
NETGEAR
NETGEAR WN111v2 - RangeMax Next Wireless USB 2.0... Manual de usuario
NETGEAR
NETGEAR PowerLine 85Mbps Manual de usuario
NETGEAR
NETGEAR PowerLINE 2000 Manual de usuario
NETGEAR
NETGEAR XAV2101 - POWERLINE AV 200 NANO ADAPTER Manual de usuario
NETGEAR
NETGEAR PA101 Manual de usuario
NETGEAR
NETGEAR WNDA3100v2 - RangeMax Dual Band Wireless-N USB 2.0... Manual de operación
