NETGEAR PowerLINE WiFi 1000 Manual de usuario

Quick Start

PowerLINE WiFi 1000

Models PL1000 and PLW1000

Package Contents

In some regions, a resource CD is included with your product.

Get Started

PowerLINE adapters give you an alternative way to extend your network

using your existing electrical wiring. Plug two or more PowerLINE adapters

into electrical outlets to create a wired network connection. Use a

PowerLINE WiFi access point to add a WiFi access point to your wired

network.

You can add up to eight Homeplug AV-certiﬁed and AV2-certiﬁed adapters

to extend your network. For a complete list of Homeplug AV-certiﬁed

devices, visit http://www.homeplug.org/certiﬁed_products.

1. Power LED 4. Ethernet port 7. WiFi LED

2. Ethernet LED 5. Factory Reset button 8. On/O switch

3. Pick A Plug LED 6. Security button 9. WPS button

4 5 6

Meet Your Adapters

Before you install your adapters, familiarize yourself with their LEDs,

buttons, and ports.

Power LED Solid green. The electrical power is on.

Solid amber. The adapter is in power saving mode (PL1000

only).

Blinking green. The adapter is in the process of setting up

security.

O. The adapter is not receiving electrical power.

Ethernet LED Solid. The Ethernet port is linked.

O. No Ethernet connection is detected.

Pick A Plug LED The Pick A Plug feature lets you pick the electrical outlet

with the strongest link performance, indicated by the color

displayed by the LED:

Red. Link rate < 50 Mbps (good).

Amber. Link rate > 50 and < 80 Mbps (better).

Green. Link rate > 80 Mbps (best).

O. The adapter did not ﬁnd any other compatible

PowerLINE devices using the same encryption key.

WiFi LED

Solid blue. The WiFi radio is on.

O. The WiFi radio is o.

Factory Reset

button

Press the Factory Reset button for one second, and then

release it to return the PowerLINE adapter to its factory

default settings.

Ethernet port Connect your wired devices, including computers, WiFi

routers and game consoles, to your PowerLINE network.

Security button Use the Security button to create a secure PowerLINE

network.

On/O switch Use the On/O switch to turn the device on and o.

WPS button Use the WPS button to automatically connect your computer

or other WiFi devices that support WPS to your PowerLINE

network.

Install Your Adapters

Note: Do not plug your PowerLINE adapters into extension cords, power

strips, or surge protectors.

Room 1 Room 2

¾To install your adapters:

1. Plug in your new adapters.

2. Wait until the Pick A Plug LEDs are lit.

3. Use your computer, tablet, or smartphone to connect to your new

PowerLINE WiFi network. The network name is printed on the product

label and is similar to Netgear##_EXT or Netgear##-5G_EXT.

Congratulations. You installed your adapters and set up your network.

You can customize the network and security settings later.

Do More

Aer your PowerLINE network is installed and running, you can use WPS to

connect your access point, expand your network, customize the network

settings, and customize security.

Use WPS to Connect to Your Network

¾To automatically connect to the PowerLINE access point

using a WPS button:

1. Press and hold the WPS button on the PowerLINE access point for

two seconds and release it.

The WiFi LED starts to blink.

2. Press the WPS button on your WiFi device for two seconds and

release it.

When the WiFi LED stops blinking, your WiFi device is automatically

connected to the PowerLINE access point and you can surf the web.

Add Adapters

To add adapters before you conﬁgure the security feature, just plug them

in and connect the adapters to your equipment.

¾To add an adapter to a PowerLINE network with security

set:

1. Plug the adapter into a wall outlet where you want to add Internet

access.

2. If you used a private encryption key, press the Security button on

one of the adapters that is already a part of the network for two

seconds, and then press the Security button on the new adapter for

two seconds.

Both buttons must be pressed within two minutes.

Note: The Security button does not work in power saving mode.

Do not press the Security button on the PowerLINE adapter until

installation is complete and the adapters are communicating with each

other (indicated by the blinking Power LED). Pressing this button too soon

can temporarily disable PowerLINE communication. If this occurs, use the

Factory Reset button to return the PowerLINE adapter to its factory

default settings.

Otros manuales para PowerLINE WiFi 1000

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Adaptador de NETGEAR

NETGEAR

NETGEAR WGE111 - 54 Mbps Wireless Gaming Adapter Manual de usuario

NETGEAR

NETGEAR WG111T - 108 Mbps Wireless USB 2.0 Adapter Manual de usuario

NETGEAR

NETGEAR RangeMax WN111v2 Manual de usuario

NETGEAR

NETGEAR WG111T - 108 Mbps Wireless USB 2.0 Adapter Manual de usuario

NETGEAR

NETGEAR XAV1101 Manual de usuario

NETGEAR

NETGEAR A6150 Manual de usuario

NETGEAR

NETGEAR WNA1000M Manual de usuario

NETGEAR

NETGEAR PowerLINE 1000 Series Manual de usuario

NETGEAR

NETGEAR WN111v2 - RangeMax Next Wireless USB 2.0... Manual de usuario

NETGEAR

NETGEAR WNDA3100v2 - RangeMax Dual Band Wireless-N USB 2.0... Manual de usuario

NETGEAR

NETGEAR TA612V Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

NETGEAR

NETGEAR XAV1301v1/XAVB1301v1 Manual de usuario

NETGEAR

NETGEAR PA101 Manual de usuario

NETGEAR

NETGEAR WN121T - RangeMax Next Wireless-N USB 2.0... Manual de usuario

NETGEAR

NETGEAR PowerLINE 2000 Manual de usuario

NETGEAR

NETGEAR AX743 - ProSafe 10 Gigabit Ethernet Manual de usuario

NETGEAR

NETGEAR XAV1301v1/XAVB1301v1 Manual de usuario

NETGEAR

NETGEAR A7000 Manual de usuario

NETGEAR

NETGEAR WG111UNA - DOUBLE 108MBPS WRLS USB 2.0 Manual de usuario

NETGEAR

NETGEAR WG111T - 108 Mbps Wireless USB 2.0 Adapter Manual de usuario

NETGEAR

NETGEAR XAVB1101 Manual de usuario

NETGEAR

NETGEAR WN311B Manual de usuario

NETGEAR

NETGEAR WN2500RP-100PAS Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario

RCA

RCA AH57R Manual de usuario

Koolatron

Koolatron AC16 Manual de usuario