NETGEAR Powerline 500 XWNB5221 Manual de usuario

Quick Start

Powerline 500

Model XWNB5221

Package Contents

In some regions, a resource CD is included with your product.

Getting Started

Powerline networking solutions give you an alternative to Ethernet-only

or wireless networks by extending your signal using the electrical wiring.

Plug 2 or more compatible Powerline 500 devices into electrical outlets to

create or extend your wired home network. In addition to Powerline 500

devices, you can add Homeplug AV-certiﬁed adapters, for a total of up

to 16 devices. For a complete list of Homeplug AV-certiﬁed devices, visit

www.homeplug.org/certiﬁed_products.

You can use the Pick A Plug feature to choose the best combination of

outlets.

You can use the Security button on each Powerline device to secure the

links between the Powerline devices.

Meet Your Adapters

Before you install your adapters, familiarize yourself with the LEDs,

buttons, and port.

Power LED

Factory Reset button Ethernet port

Pick A Plug LED

Ethernet LED

Security button

Powerline 500 WiFi Access Point

(XWN5021)

Powerline 500 Adapter

(XAV5221)

Ethernet port

Factory Reset button

Power LED Wireless LED

On/O switch

Pick a Plug LED

Security button

Power LED Solid green. The electrical power is on.

Blinking amber. The adapter is in power saving mode.

Blinking green. The adapter is in the process of setting up

security.

O. The electrical power is o.

Wireless access points can take up to 30 seconds to power

on.

Ethernet LED Solid. The Ethernet port is linked.

O. The Ethernet port is not linked.

Pick A Plug LED The Pick A Plug feature lets you pick the electrical outlet with

the strongest link rate, indicated by the color displayed by the

LED:

Solid. The adapter is connected to a Powerline network.

• Green. Link rate > 80 Mbps (best)

• Amber. Link rate > 50 and < 80 Mbps (better)

• Red. Link rate < 50 Mbps (good)

O. The adapter did not ﬁnd any other compatible Powerline

devices using the same encryption key.

Wireless LED Solid. The Powerline wireless access point is securely paired

with the wireless network client.

Blinking. The Powerline wireless access point is pairing with

the wireless network client.

Factory Reset

button

Press the Factory Reset button for one second, then release

it to return the Powerline adapter to its factory default

settings.

Ethernet port Connect your computers, networking equipment, and other

equipment that uses an Ethernet cable to your Powerline

network.

On/O switch Slide to turn the adapter o or on.

Security button Use the Security button to create a secure Powerline

network. On your WiFi access point, use the Security button

both to create a secure Powerline network and to let your

wireless clients join the wireless network.

Warning: Do not press the Security button on the Powerline adapter until

installation is complete and the adapters are communicating with each other

(indicated by the blinking Pick A Plug LED). Pressing this button too soon can

temporarily disable Powerline communication. If this occurs, use the Factory

Reset button to return the Powerline adapter to its factory default settings.

Install Your Adapters

Room 1 Room 2

Secure Your Network

¾To create a secure network:

1. Plug in your adapters, including the WiFi access point adapter.

2. Wait until the Pick A Plug LEDs are blinking.

3. Press the Security button on one of the adapters for two seconds,

then press the Security button on one of the other adapters in your

existing network for two seconds.

Both buttons must be pressed within two minutes.

4. If you are installing additional adapters, repeat step 3with one of the

secure adapters and one of the adapters that is not yet secured.

Note: The Security button does not work in power saving mode (see

Troubleshooting Tips on page 13).

Warning: Do not press the

Security

button on the Powerline adapter until

installation is complete and the adapters are communicating with each

other (indicated by the blinking Pick A Plug LED). Pressing this button too

soon can temporarily disable Powerline communication. If this occurs, use

the

Factory Reset

button to return the Powerline adapter to its factory

default settings.

5. Secure your WiFi access point. You can create a secure WiFi

connection between your Powerline WiFi access point and your

wireless devices in two ways: use NETGEAR genie or, for wireless

devices that support it, WPS (Wi-Fi Protected Setup).

To secure the WiFi network using NETGEAR genie:

a. Download and install NETGEAR genie.

To download the version of genie for your computer, visit

www.netgear.com/home/discover/apps/genie.aspx.

b. Temporarily connect your computer to the Ethernet port on

the Powerline WiFi access point.

c. Run NETGEAR genie.

d. Right-click the Powerline WiFi access point’s icon.

Tabla de contenidos

Otros manuales de Adaptador de NETGEAR

NETGEAR

NETGEAR WNA3100 - Wireless-N 300 USB Adapter Manual de usuario

NETGEAR

NETGEAR XAV6501 Manual de usuario

NETGEAR

NETGEAR 85 Mbps Wall-Plugged Ethernet Adapter XE103 Manual de usuario

NETGEAR

NETGEAR XAV2602 Manual de usuario

NETGEAR

NETGEAR HDX101 - Powerline HD EN Adapter Bridge Manual de instrucciones

NETGEAR

NETGEAR XAV1101 - Powerline Ethernet Adapter Manual de usuario

NETGEAR

NETGEAR Powerline 500 Nano Manual de usuario

NETGEAR

NETGEAR GA302T Manual de usuario

NETGEAR

NETGEAR WNCE2001 - Ethernet to Wireless Adapter Manual de usuario

NETGEAR

NETGEAR FA411 Manual de usuario

NETGEAR

NETGEAR WNDA4100 Manual de usuario

NETGEAR

NETGEAR RangeMax Wireless USB 2.0 Adapter WPN111 WPN111NA... Manual de usuario

NETGEAR

NETGEAR RB-WPN111NA Manual de usuario

NETGEAR

NETGEAR XAV5004 - POWERLINE AV 500 ADAPTER Manual de usuario

NETGEAR

NETGEAR Powerline 1200 Manual de usuario

NETGEAR

NETGEAR XAV1301v1 Manual de usuario

NETGEAR

NETGEAR GA620 - PCI Fiber Card Manual de usuario

NETGEAR

NETGEAR FA511 - 32-bit CardBus PC Card Mobile Manual de usuario

NETGEAR

NETGEAR GA511 - Gigabit Ethernet PC Card Manual de usuario

NETGEAR

NETGEAR WNA1000 - Wireless-N 150 USB Adapter Manual de usuario

NETGEAR

NETGEAR GA511 - Gigabit Ethernet PC Card Manual de usuario

NETGEAR

NETGEAR A6100 Manual de usuario

NETGEAR

NETGEAR WG111T - 108 Mbps Wireless USB 2.0 Adapter Manual de usuario

NETGEAR

NETGEAR WNA3100M Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario

RCA

RCA AH57R Manual de usuario

Koolatron

Koolatron AC16 Manual de usuario