Net Safety VID-C Manual de usuario
Colour Explosion Proof Video Camera
USER MANUAL
VID-C
Part Number: MAN-0036-00 Rev 4
Copyright © 2002 Net Safety Monitoring Inc.
Printed in Canada
This manual is providedforinformational purposes only. Althoughthe informationcontained in this manual is
believedto be accurate, itcould include technical inaccuracies ortypographical errors. Changes are, therefore,
periodically made to the information within this document and incorporated without notice into subsequent
revisions of the manual. Net Safety Monitoring Inc. assumes no responsibility forany errors that may be
containedwithin this manual.
This manual is a guide forthe use of a VID-C and the data and procedures contained within this document have
been verified and are believed to be adequate forthe intendeduse of the camera . If the cameraorprocedures are
used forpurposes otherthan as described in the manual without receiving priorconfirmation of validity or
suitability, Net Safety Monitoring Inc. does not guarantee the results and assumes no obligation orliability.
No part of this manual may be copied, disseminated ordistributed without the express written consent of Net
Safety Monitoring Inc.
Net Safety Monitoring Inc. products, are carefully designed and manufactured fromhigh quality components and
can be expected to provide many years of trouble free service. Each product is thoroughly tested, inspected and
calibrated priorto shipment. Failures can occurwhich are beyond the control of the manufacturer. Failures can be
minimized by adhering to the operating and maintenance instructions herein. Where the absolute greatest of
reliability is required, redundancy should be designed into the system.
Net Safety Monitoring Inc., warrants its sensors and detectors against defective parts andworkmanship fora
period of 24 months fromdate of purchase and otherelectronic assemblies for36 months fromdate of purchase.
No otherwarranties orliability, expressed orimplied, will be honored by Net Safety Monitoring INC
Contact Net Safety Monitoring Inc. oran authorized distributorfordetails.
Table of Contents
Chapter1Introduction .................................................. 1
Description ............................................................................ 1
Features .............................................................................. 1
Chapter2InstallationandStartUp ....................................... 2
What’sinthepackage ................................................................... 2
LocationofCamera(s) ................................................................... 2
Figure1VID-CDimensionalDiagram ................................................. 3
Figure2SwivelMount............................................................. 4
VID-CWiring .......................................................................... 5
Figure 3 Wiring diagram for the VID-C colour video camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
InstallationChecklist..................................................................... 7
StartUp .............................................................................. 7
Chapter3Troubleshooting .............................................. 7
Chapter4Maintenance ................................................. 8
AppendixATechnicalSpecifications ....................................... I
Appendix B Electrostatic Sensitive Device Handling Procedure . . . . . . . . . . . . . . . . II
1
Chapter 1 Introduction
Description
The NetSafety Monitoring Inc. VID-C explosion proof video camera is ideally suited forsafety
monitoring systems in hazardous locations. The colorvideo camera, mounted in anexplosion proof
housing, delivers acomposite video output foruse with most VCR's orvideo monitors. The wide
viewing angle provides forlarge areacoverage by one camera.
Features
<Full color video with optional black and white
<Compatible with industry standard CCTV hardware and software
<3 feet of video cable with RCA jack included
<Viewing angle of 52/horizontal
<High Resolution
<Extremely compact size
2
Chapter 2 Installation and Start Up
What’s in the package
Remove all the components fromthe packing box(s) carefully; checkcomponents against the packing list. Inspect
all components forobvious damage andbroken/loose parts. Notify the carrierand distributorimmediately if
damage is found orparts are missing.
Location of Camera(s)
Proper location of the VID-C is essential for providing maximum coverage. The most effective placement and
numbers of cameras varies depending onthe location. Experience, common sense, and knowledge of the areawill
determine the numberof cameras needed and the best locations to monitorthe area adequately.
The following factors are important and should be considered forevery installation:
<The VID-C should be located where it is safe frompotential sources of contamination i.e.
oil film, dirt.
<The VID-C must be accessible forcleaning.
<Exposure to excessive heat orvibration can cause premature failure of electronic devices
and should be avoided if possible.
Refer to figure 1 and 2 for installation information.
3
Figure 1 VID-C Dimensional Diagram
4
Figure 2 Swivel Mount
5
VID-C Wiring
NOTE
The VID-C contains semiconductor devices that are susceptible to damage by electrostatic discharge. An
electrostatic charge can build up on the skin and discharge when an object is touched. Therefore, use
caution when handling the device, taking care not to touch the terminals or electronic components. For
more information on proper handling, refer to 'Electrostatic Sensitive Device Handling Procedure', in
Appendix A.
Referto Figure 3 forwiring information. An RCA jackis terminatedat the end of the 3 footcoaxial cable.
Coaxial cable transmission is up to 1000 feet without amplification. Regular video cable
transmission is from 500 feet to 700 feet maximum.
NOTE:
The wiring procedures in this manual are intended to ensure proper functioning of the device under
normal conditions. However, because of the many variations in wiring codes and regulations, total
compliance to these ordinances cannot be guaranteed. Be certain that all wiring complies with
applicable regulations that relate to the installation of electrical equipment in a hazardous area. If in
doubt, consult a qualified official before wiring the system.
6
Figure 3 Wiring diagram for the VID-C colour video camera
The use of Coaxial cable is highly recommended for the video signal to protect against interference
caused by extraneous electrical “noise”.
Referto applicable wiring codes wheninstalling andwiring the VID-C. Afterthe fieldwiring has beencarefully
connected, checkthat the correct wires are connected to the corresponding terminals and that voltage levels do not
exceedthe specifications. When the wiring and voltages have beenverified remove powerform the system.
Tabla de contenidos
Manuales populares de Videocámara de otras marcas
Panasonic
Panasonic AG-HMC152EN Manual de usuario
Insignia
Insignia NS-DCC5HB09 - Camcorder - 720p Manual de usuario
MYDLINK
MYDLINK DCS-6100LH Manual de usuario
Sony
Sony video Hi8 Handycam CCD-TR555 Manual de usuario
SECURECOM
SECURECOM V-5014B Manual de usuario
Panasonic
Panasonic HDC-SD100 Manual de usuario
