NESO Technology Pomona FD 910G Manual de usuario
1
Pomona FD 910G
19” “Trinitron®” Color Monitor
(KEY Control)
User’s Manual
IBM PC, IBM PS/2, and VGA are registered trademarks of International Business Machines Corp. Windows,
DOS are registered trademarks of Microsoft Corp. Macintosh is a registered trademark of Apple Computer Inc.
ENERGY STAR is a U.S. registered mark. FD Trinitron is registered trademark of Sony Corporation.
NESO reserve the right to make changes or improvement in this product described in this manual without notice.
Every effort has been made to ensure that the information in this manual is accurate. NESO Technology Inc. is
not responsible for printing or clerical errors.
FD 910G User’s Manual
2
Federal Communications Commission (F.C.C.) Statement
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
!Relocate the receiving antenna
!Increase the separation between the equipment and receiver
!Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
!Consult the dealer or an experienced radio/TV devices technician for help.
Use only shielded cables or connect I/O devices to this equipment.
You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
3
Table of Contents
Federal Communications Commission (F.C.C.) Statement ...............................................2
Safety Precautions..............................................................................................................4
Quick Installation Guide ....................................................................................................6
Operation............................................................................................................................8
Front Panel Buttons............................................................................................................8
On-Screen Display (OSD) Main Menu..............................................................................9
RECALL ....................................................................................................................9
PICT (Picture) ............................................................................................................9
LANG (Language) ...................................................................................................10
SCREEN...................................................................................................................10
EXIT......................................................................................................................... 11
GEOM (Geometry) .................................................................................................. 11
COLOR ....................................................................................................................12
iVIDEO ....................................................................................................................12
OPTION ...................................................................................................................13
Specifications...................................................................................................................14
Preset Display Modes.......................................................................................................15
Pin Assignment ................................................................................................................15
Troubleshooting................................................................................................................16
DDC Plug & Play.............................................................................................................17
Cleaning the Monitor .......................................................................................................18
FD 910G User’s Manual
4
Safety Precautions
Please read following instructions before use:
1. Please install the swivel base for this monitor before using it.
2. Avoid exposing the monitor to direct sunlight and ensure the area around the monitor is
free from moisture. Never allow any liquid to get inside the monitor.
3. Do not place any objects on the case.
4. Never place the monitor near a heat source such as a radiator.
5. To prevent overheating, the openings for ventilation on the top, rear, bottom and side of
the monitor should be kept free of any obstructions.
6. Do not open the case of the monitor, as doing so may expose you to dangerously high
voltage levels. Never attempt to perform repairs on the monitor yourself, but refer all
servicing to qualified personnel.
7. Disconnect the monitor from the power outlet when the monitor is not in use for
extended periods of time.
8. Continuous use of the monitor over long periods of time may result in permanent
damage to the CRT's screen elements. To increase the life of the CRT, make sure to turn
off the power or reduce its brightness when the monitor is not in use.
9. The monitor is equipped with a three-wire grounding-type plug. For safety, this device
should only be used with a grounding-type power outlet. If your outlet is not of this type,
contact your electrician for replacement. Never use a 3-to-2 prong adapter.
Due to the safety requirements of different areas, please select a suitable power cord
according to the following rules, in addition to the electric rating:
A. Northern America Area: Please select a UL listed and CSA certified power cord.
B. Germany: Please select VDE certified power cord.
C. Nordic countries: Please select a power cord certified by SEMKO, NEMKO,
DEMKO or FIMKO
D. The other areas: Please select a power cord suitable to the local power system and
power outlet.
Usually when this product is sold, a suitable power cord is provided by the manufacturer.
However, this product is sometimes resold or transported to another area with a different
power system and safety requirements. Please pay attention to the selection of a
suitable power cord.
5
The plug on the power cord is intended to serve as the disconnect device, the socket-
outlet shall be installed near the equipment and shall be easily accessible.
10. This monitor is designed with a universal power supply that is suitable for 100 – 240
VAC and 50 – 60Hz frequency.
FD 910G User’s Manual
6
Thank you for your purchase of a NESO FD 910G color monitor. Your NESO FD 910G
package includes:
!NESO FD 910G color monitor
!Swivel base
!Power cord
!Monitor Installation Disk
!This user’s manual
Please contact your local distributor if any of these items are missing.
Important!
1. You may wish to save the original box and packing materials for future use in
shipping the monitor.
2. This monitor may, due to the effects of magnetic materials located nearby or of the
Earth’s magnetic field, show localized color discrepancies. It is recommended that
the monitor be positioned so that the screen faces east, and that any items that
emit electromagnetic fields (such as stereos) not be placed near the monitor.
Quick Installation Guide
1. Install swivel base
Align the swivel base with the slots on the bottom of the monitor and insert the swivel
base into the slots. Push the swivel base firmly toward the front of the monitor until the
latches click into the locked position.
7
2. Connect the signal cable
Make sure both the monitor and your computer are turned OFF. Connect the monitor to
the computer using the attached signal cable ("in the diagram below).
3. Connect the power cord
Connect the power cord to a properly grounded AC outlet, then insert the other end into
the AC IN jack on the monitor (#in the diagram below).
4. Turn on the computer and monitor
Be sure to first power up the computer, before turning on the monitor.
NOTE: If you are using Windows 98, you may see a message asking you to install
certain software.
5. Install the monitor's driver software
Please refer to the readme.txt file contained in the Monitor Installation Disk.
6. Configure the monitor's display mode (resolution and refresh rate)
Example: 1024 x 768 @ 85 Hz
Right-click on the Windows desktop to bring up the pop-up menu, then select
Properties>Settings>Desktop Area. Set the resolution in the dialog box that appears. For
instructions on setting refresh rates, please refer to the documentation provided with your
graphics card.
7. Adjust the screen image using the monitor's On-Screen Display (OSD) controls
See the Operation section of this manual for information on using the OSD controls.
#AC IN
"Attached Signal Cable
FD 910G User’s Manual
8
Operation
This section explains how to fine-tune your monitor's screen image to suit your personal
preferences, or to adapt it for different applications or lighting conditions.
Front Panel Buttons
#Power On/Off button with LED indicator
"OSD (On-Screen Display) button — brings up the OSD control menu
$Up and Down buttons — selects sub-menus within the OSD controls
%Left and Right buttons — increases or decreases selected values when using the OSD
controls
When the monitor in on, press the Up/Down ($in the diagram above) or Left/Right (%in
the diagram above) buttons. This will bring up on the screen of your monitor the
BRIGHTNESS/CONTRAST menu shown below.
Shows the brightness level of screen image
Shows the contrast level of screen image
Press the Left and Right buttons to adjust contrast.
Press the Up and Down buttons to adjust brightness.
9
On-Screen Display (OSD) Main Menu
Your FD 910G color monitor provides nine main control parameters that you can adjust
according to preference. To access the main menu of the OSD controls, press the OSD
button ("in the diagram above). On the screen of the monitor, the menu shown below will
appear.
The following is a description of the different choices shown in the main OSD control menu.
RECALL
GEOM RECALL (Geometry Recall)
Restores all Geometry settings (except rotation) to factory preset values.
CONV RECALL (Convergence Recall)
Restores all Convergence settings to factory preset values.
LAND RECALL (Landing Recall)
Restores all Landing setting to factory preset values
PICT (Picture)
FD 910G User’s Manual
10
H-POSITION (Horizontal Position)
Adjusts the position of the screen image left or right.
H-SIZE (Horizontal Size)
Adjusts the width of the screen image.
V-POSITION (Vertical Position)
Adjusts the position of the screen image up or down.
V-SIZE (Vertical Size)
Adjusts the height of the screen image.
ZOOM
Magnifies or shrinks the screen image.
LANG (Language)
Allows users to choose from among seven languages for displaying text in the OSD
controls—English, French, Italian, German, Spanish, Japanese and Simplified Chinese.
SCREEN
MOIRE
Reduces the distortion effects of wavy lines or ripples oriented vertically in the screen
image.
Caution:
1. If moiré reduction is overdone, picture quality, i.e. focus and vertical line
stability will both be affected.
2. Proper adjustment is recommended for not affecting picture performance.
Tabla de contenidos
Otros manuales de Monitor de NESO Technology
NESO Technology
NESO Technology Pomona FD 770A Manual de usuario
NESO Technology
NESO Technology LD 500/500V 15" Manual de usuario
NESO Technology
NESO Technology LD 500V Manual de usuario
NESO Technology
NESO Technology Trinitron Manual de usuario
NESO Technology
NESO Technology Pomona FD 570A Manual de usuario
NESO Technology
NESO Technology Pomona FD 786G Manual de usuario
