NeoTech JPEG2000 Manual de instalación y funcionamiento
Best picture quality DVR
JPEG2000 Stand-alone DVR
0
INSTALLATION & SAFEGUARDS
All the safety and operating instructions should be read before the unit is operated.
Environment Condition for Installation
- To prevent electric shock or other hazard, do not expose units to rain, moisture, or dust.
- This unit should be located in an area with low humidity and a minimum of dust..
- Place this unit in a well-ventilated place and do not place heat-generating objects on this unit.
- This unit should not be located in an area where it is likely to be subjected to mechanical shocks.
Before You Start
- Ensure the power switch is in the OFF position prior to starting.
- Do not attempt to service this unit yourself as opening or removing covers may expose you to
dangerous voltage or other hazards.
- Installation should be performed by qualified service personnel only.
- This unit should be operated only from the type of power source indicated on the manufacturer’s
label and with the power supply included with the unit.
Notice
- Before initial configuration or operation you must first set the TIME/DATE, followed by
setting the unit to the FACTORY DEFAULT settings, lastly clearing the HDD. Please follow
these steps in order.
- Before installing a second HDD, ensure that the drive conforms to the specifications
listed on the specifications page at the end of this manual. When installing a second HDD,
set the drive to SLAVE. After installation, first reset the TIME/DATE, followed by resetting
the unit to the FACTORY DEFAULT settings, lastly clearing the new HDD.
- Pull the unit out of record mode prior to cutting power to the unit. Do this by entering the
setup menu, followed by switching the unit off. Powering off the unit while writing to the
disks can cause critical malfunctions. (ex: Recording Error, Playback Error, System Error)
- When you set the record type, you have to set the Record Configuration and also
Schedule Setup. This unit records as per the Record type & Schedule setup.
- The [REC] button on the front panel is for emergency record using highest image quality.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the
user of this equipment that there are dangerous voltages within the enclosure which may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to presence of
important operating and maintenance(Servicing) instructions in the literature accompanying the
appliance.
Installation & Safeguards
Ver 1.3
Best picture quality DVR
JPEG2000 Stand-alone DVR
1
Contents
Contents
16----------------------------------------------------------------Playback4-7.
16----------------------------------------------------------------Record4-6.
15----------------------------------------------------------------Zoom View5)
15----------------------------------------------------------------Freeze View4)
14----------------------------------------------------------------Display Configuration4-4.
14----------------------------------------------------------------Factory Default4-3.
13----------------------------------------------------------------System Log-in4-2.
13----------------------------------------------------------------Start-up DVR4-1.
15----------------------------------------------------------------PIP View3)
15----------------------------------------------------------------Sequencing Cameras2)
15----------------------------------------------------------------Full / Multiple View1)
15----------------------------------------------------------------Live View Setup4-5.
17
18
18
----------------------------------------------------------------
----------------------------------------------------------------
----------------------------------------------------------------
Search
PTZ Camera Operation
Data Back-Up
4-8.
4-9.
4-10.
13----------------------------------------------------------------OperationCHAP. 4
12----------------------------------------------------------------RS-232C ASCII-code8)
12----------------------------------------------------------------Connector Pin Assignment7)
11----------------------------------------------------------------Other External Device6)
11----------------------------------------------------------------VCR, Video Printer5)
10----------------------------------------------------------------Power4)
10----------------------------------------------------------------Monitor3)
10----------------------------------------------------------------Camera2)
9----------------------------------------------------------------HDD(Hard Disk Drive)1)
9----------------------------------------------------------------Detailed Installation3-2.
8----------------------------------------------------------------Installation Configuration3-1.
8----------------------------------------------------------------InstallationCHAP. 3
7----------------------------------------------------------------Rear2-2.
5----------------------------------------------------------------Front2-1.
5----------------------------------------------------------------Function of Each ButtonCHAP. 2
4----------------------------------------------------------------Package Contents1-2.
3----------------------------------------------------------------Features1-1.
3----------------------------------------------------------------Features & Package ContentsCHAP. 1
Best picture quality DVR
JPEG2000 Stand-alone DVR
2
Contents
25----------------------------------------------------------------System Information8.
54----------------------------------------------------------------SpecificationsCHAP. 7
38
43
45
49
----------------------------------------------------------------
----------------------------------------------------------------
----------------------------------------------------------------
----------------------------------------------------------------
Remote Viewer Program
Back-Up CD Player
DDNS function
FAQ
6-2.
6-3.
6-4.
6-5.
31----------------------------------------------------------------DVR Network Configuration6-1.
29----------------------------------------------------------------RS-232C Setup2.
29----------------------------------------------------------------TCP/IP Setup1.
28----------------------------------------------------------------External Device5-6.
28----------------------------------------------------------------Back-Up5-5.
31----------------------------------------------------------------Network SetupCHAP. 6
30----------------------------------------------------------------Language Setup5-8.
30----------------------------------------------------------------FACTORY Default5-7.
29----------------------------------------------------------------Pan Tilt Zoom Setup3.
27----------------------------------------------------------------Holiday Setup3.
27----------------------------------------------------------------Schedule Setup2.
26----------------------------------------------------------------Record Configuration1.
26----------------------------------------------------------------Record Setup5-4.
25----------------------------------------------------------------Password Setup7.
25----------------------------------------------------------------Buzzer Setup6.
24----------------------------------------------------------------Alarm Setup5.
24----------------------------------------------------------------Interval Setup4.
22----------------------------------------------------------------Camera Setup3.
22----------------------------------------------------------------TIME/DATE Setup2.
21----------------------------------------------------------------HDD Management1.
21----------------------------------------------------------------Configuration5-3.
20----------------------------------------------------------------Monitor Setup2)
20----------------------------------------------------------------Screen Display1)
20----------------------------------------------------------------Display Setup5-2.
19----------------------------------------------------------------Entering the Menu5-1.
19----------------------------------------------------------------Set UpCHAP. 5
Best picture quality DVR
JPEG2000 Stand-alone DVR
3
Live View
Real time display per camera
Auto Sequence
PIP (Picture in picture)
Digital Zoom
Display Freeze
Simple Playback mode
Simple PTZ camera control
Record
Variable Record resolution (For higher picture quality or higher recording speed)
Efficient Image Quality setup in 5 steps
Schedule Record / Holiday Record
Event Record (Alarm / Motion)
Emergency Record
Network
View Live and Playback images across IP network
Copy images across the network
Playback
Search & Playback by Date/Time, Event, Camera
Outstanding picture quality by JPEG 2000 compression algorithm (No mosaic effect)
Suitable for recording not only images but also text
Various steps in Forward Playback Speed (X1/16, X1/8, X1/4, X1/2, X2, X4, X16, X32, X64)
Various steps in Backward Playback Speed (X1/16, X1/8, X1/4, X1/2, X2, X4, X16, X32, X64)
Easy and convenient search by Jog Shuttle & Remote Controller
Data Back-Up
Simple Back-Up using built-in CD Writer (Back-up CD Player included in the package)
Network Back-Up using Remote Viewer program(Remote Viewer included in the package)
Supports bigger capacity of HDD (400GB or bigger)
Others
Multi-Language (English, Spanish, Portuguese, German, French, Italy, Japan, Chinese)
VGA support both TFT LCD monitor and CRT monitor (option)
Lock the system by Password
JOG / SHUTTLE
PAL/NTSC Auto detection
Control the unit by using Remote Controller
CHAP. 1 Features & Package Contents
CHAP. 1 Features & Package Contents
1-1. Features
Best picture quality DVR
JPEG2000 Stand-alone DVR
4
CHAP. 1 Features & Package Contents
1-2. Package Contents
1. DVR Main Unit 2. Remote Controller
3. Power Cable
4. Power Adapter 5. User’s Manual
6. Software CD
7. Battery for remote controller 8. Bolts
For attaching Hard Disk Drive into DVR8. Bolts
Battery for remote controller7. Battery
Remote Viewer Software & Back up CD player6. Software CD
User’s Manual5. User’s Manual
12 V DC power supply to DVR main board4. Power Adapter
AC power supply to adapters for 12 V DC power3. Power Cable
DVR control2. Remote Controller
STAND-ALONE DIGITAL VIDEO RECORDER1. DVR Main Unit
DescriptionPackage Contents
Best picture quality DVR
JPEG2000 Stand-alone DVR
5
Reduce or increase the option value in the menu
Navigate in the menu
Move to next step
Selects each menu option
Set up for SYSTEM MENU or Use to exit the menu
Search recorded data on HDD
Playback of recorded data on HDD
Record Stop, Playback Stop, or Return to Schedule Record
from Emergency Record
Emergency Record at continuous, 60ips, SUPER FINE size
•F4 : USER 4
•F3 : USER 3
•F2 : USER 2
•F1 : USER 1
•AUTO : AUTO SCAN
•GOTO : GOTO PRESET
•CLEAR : CLEAR PRESET
•SET : SET PRESET
ENTER
MENU⑥SETUP
SEARCH
PLAY
+ -
▲▼◀▶
NEXT
STOP
REC⑤Record /
Playback
•TELE : ZOOM OUT
•WIDE : ZOOM IN
•FAR : FOCUS FAR
•NEAR : FOCUS NEAR
•CLOSE: IRIS CLOSE
•OPEN : IRIS OPEN
•OFF : LIGHT OFF
•ON : LIGHT ON
2. Control PTZ camera (Each button is assigned for each PTZ command)
1. Pressing this button will display a full screen image of that camera④Camera
selection
&
PTZ camera
control
IR receiver③IR
Firmware upgrade by connecting PC with latest firmware to USB port②USB Device
Shows status of operation①LED Lamps
FunctionName
CHAP. 2 Function of Each Button
2-1 FRONT
CHAP. 2 Function of Each Button
Best picture quality DVR
JPEG2000 Stand-alone DVR
6
⑩CD-RW
⑨Jog Shuttle
⑧Jog Shuttle
Control
Very easy and convenient search : Press J. Shuttle button, and images in
playback pause, and Jog and Shuttle makes it very easy and convenient to
search, forward or backward, fast and slow, as user want.
ACTIVE LED on : When J. SHUTTLE button is pressed
RUN LED on : While you operate Jog or Shuttle
Pressing Jog Shuttle button (Ready for use Jog/Shuttle)
: In playback mode, pressing J. SHUTTLE button make
images frozen.
Lock the key function
Auto camera image sequencing in full screen mode
Display in PIP (Picture in Picture) mode
Switch to split display
Freezing an Image
Zooming an image
On/Off for PAN/TILT/ZOOM control mode
Press this button first to control PTZ camera connected to
DVR unit via RS-485
Data Back-up using built-in CD writer
J.SHUTTLE
K.LOCK
SEQ
PIP
MODE
FRZ
ZOOM
PTZ⑦LIVE View
Control
FunctionName
CHAP. 2 Function of Each Button
Best picture quality DVR
JPEG2000 Stand-alone DVR
7
CHAP. 2 Function of Each Button
2-2. REAR
4 Channel
8 Channel
16 Channel
Best picture quality DVR
JPEG2000 Stand-alone DVR
8
3-1. Installation Configuration
CHAP. 3 Installation
CHAP.3 Installation
10
9
8
7
6
5
4
3
2
1
MONITOR
Output
LOOP Output
CAMERA Input
RS-232C
ETHERNET
VGA
SENSOR Input
Connection with PTZ Camera or other external device using RS 485
interface (Pin 1: D- / Pin 2: D+)
RS 485
POWER
SWITCH
DC Power
VCR Output
Power ON/OFF
DC power input (DC12V, 10A )
Connection with VCR for analog backup
Connection with Composite Monitor
Camera loop out
Connection with camera
Connection to external device as PC using RS-232C to control the DVR
Connection to ETHERNET device
Connection to VGA Monitor (CRT type or TFT LCD monitor)
Sensor input terminal(Pin 6,7 : Ground,
Pin 8 ~15 : Sensor input)
Relay out terminal (Pin 3: Relay COM / Pin 4: NC / Pin 5 : NO)RELAY Output
FunctionName
Best picture quality DVR
JPEG2000 Stand-alone DVR
9
1) HDD
1. Connect Main Board and HDD using IDE cable and HDD power cable.
2. The jumper setting of HDD should be on Master if you install only one HDD.
3. The jumper setting of HDD1 should be on Master and HDD2 should be on Slave if you install
two HDDs.(Refer to the above figure)
4. Stick the HDD absorber (included in package) on the bottom of case and then install the HDD
on top of them by using the bolts (included in package).
5. Screws must be inserted from outside of the case bottom.
CHAP. 3 Installation
3-2. Detailed Installation
Tabla de contenidos
