2. How to Use Smart Pegboard
①
How to Turn the Smart Pegboard ON / OFF
-
ON : Connect the power cable and push the [START] button .
-
OFF : Push the [STOP] button for 4 seconds.
-
Disply is off after 10 minutes of inactivity.
-
The power turns off after 1 hour of inactivity.
* For a 10000mAh potable battery-Usable for 6hours.
②
Placing the board
Put the board on the base unit.
-
The base unit automatically recognizes the board and proceeds
with the training for each board.
③
Setting up the Affected Side
Set the affected side with the [START] button.
-
From the direction where the [START] button is pressed, you
can use the display and the button.
④
Controlling the Volume
When using the pegboard, you can control the volume to suit
the user’s conditions.
⑤
Setting Language
You can set the screen and audio language separately in
<language> menu.
