NEO ELIPSOLED LITE 50 Manual de usuario

P. 1

- Neo Elipsoled Lite 50

USER MANUAL / MANUAL DE USUARIO

PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE

POR FAVOR LEA LAS INSTRUCCIÓNES ANTES DE USAR

ELIPSOLED

LITE 50

ELIPSOIDAL LED

LUMINAIRE

P. 2

Neo Elipsoled Lite 50 - English version

1. OVERVIEW

ELIPSOLED LITE 50

Elipsoidal LED Luminaire - 1 WW 50W LED

Elipsoled Lite 50 is an ellipsoidal LED luminaire that

sports 1 50W White LED that works at a color temper-

ature of 3500K. The equipment is compact and light-

weight and has - among its most salient attributes - a

manual zoom that goes from 20º to 39º. Elipsoled

Lite 50 has an integrated portagobos, manual focus,

4 selectable dimmer curves, beam shutters and

practical gel frame bracket. Amongst its most rele-

vant features the user will nd the built-in USB port

that - in combination with NEO Stick USB - allows the

user to control the unit in wireless mode or via NEO

Wi app – iOS® & Android®.

Source & Optics

• Light Source: 1 50W White LED

• Color temperature: 3500K

• LEDs life: 50,000 hours

• Zoom: 20º-39º manual zoom

Photometric data

• Flux @ 20º: 7,900 Lux @ 6.5 . (2M)

• Flux @ 39º: 2,700 Lux @ 6.5 . (2M)

• Color rendering: >81Ra

Eﬀects & Functions

• Dimmer: Full range 0-100%

• 4 dimming curves

• Strobe eect: 0-30Hz

• Standard beam shutters

• Manual focus

• Flat and even light eld

• Gobo holder

• Gobo size:

- Outer: 53.3 mm. (2 in.)

- Inner: 43 mm. (1.7 in.)

- Thickness: 2 mm. (0.07 in.) MAX

• Flicker free

• Very silent operation

• Gel frame brackets and retaining clip included

Control

• DMX channels: 1/3

• Operational modes: DMX, Master/Slave, au-

to-run, wireless DMX (with optional Neo Stick

USB) and IR (with optional IR6 controller)

Physical

• 4-digit LED display

• DMX connectors: 2 XLR connectors (XLR-3 In

and Out)

• Power supply connectors: Interlock In/Out

• Cooling: Auto-sensing noiseless fan

• Dimensions: 480x157x381 mm. / 18.9x6.2x15 in.

• Weight: 4.2 Kg. / 9.3 Lbs.

P. 3

- Neo Elipsoled Lite 50English version

2. SAFETY

Warning

Before carrying out any operations with the

unit, carefully read this instruction manual and

keep it with cure for future reference. It contains

important information about the installation,

usage and maintenance of the unit.

General instruction

• The products referred to in this manual con-

form to the European Community Directives

and are therefore marked with

• The unit is supplied with hazardous network

voltage (230V~). Leave servicing to skilled per-

sonnel only. Never make any modications on

the unit not described in this instruction manu-

al, otherwise you will risk an electric shock.

• Connection must be made to a power supply

system tted with eicient earthing (Class I ap-

pliance according to standard EN 60598-1). It is,

moreover, recommended to protect the supply

lines of the units from indirect contact and/or

shorting to earth by using appropriately sized

residual current devices.

• The connection to the main network of electric

distribution must be carried out by a quali-

ed electrical installer. Check that the main

frequency and voltage correspond to those

for which the unit is designed as given on the

electrical data label.

• This unit is not for home use, only professional

applications.

• Never use the xture under the following condi-

tions: - in places subject to vibrations or bumps;

- in places with a temperature of over 40 °C.

• Make certain that no imammable liquids, wa-

ter or metal objects enter the xture.

• Do not dismantle or modify the xture.

• All work must always be carried out by qualied

technical personnel. Contact the nearest sales

point for an inspection or contact the manufac-

turer directly.

• If the unit is to be put out of operation deni-

tively, take it to a local recycling plant for a dis-

posal which is not harmful to the environment.

Warnings and installation

precautions

• If this device will be operated in any way difer-

ent to the one described in this manual, it may

suer damage and the guarantee becomes

void. Furthermore, any other operation may

lead to dangers like short circuit, burns, electric

shock, etc.

• Before starting any maintenance work or

cleaning the proyector, cut o power from main

supply.

• Always additionally secure the projector with

the safety rope. When carrying out any work,

always comply scrupulously with all the regula-

tions (particularly regarding safety) currently in

force in the country in ehich the xture's being

used.

• Install the xture in a well ventilated place.

• Keep any inplammable material at a safe dis-

tance from the xture.

• Shields, lenses or ultraviolet screens shall be

changed if they have become damaged to such

an extent that their eectiveness is impaired.

• The lamp (LED) shall be changed if it has be-

come damaged or thermally deformed.

• Never look directly at the light beam. Please

note that fast changes in lighting, e.g. ashing

light, may trigger epileptic seizures in photo-

sensitive persons or persons with epilepsy.

• Do not touch the product’s housing when oper-

ating because it may be very hot.

P. 4

Neo Elipsoled Lite 50 - English version

3. THE PRODUCT

DMX IN/OUT

LED Display

Fuse Holder

Power In

Menu Buttons

Power Out

Safety Loop

Bracket

Adjustment

Knob

Framing

Shutter x4

Gel Frame

Holder

Gel Frame

Focus Knob

Gobo Holder

Thumbscrew

Zoom Knob

P. 5

- Neo Elipsoled Lite 50

English version

4. MOUNTING

Safety Cable

Bracket

Adjustment

Knob

Mounting Clamp Mounting Bracket

P. 6

Neo Elipsoled Lite 50 - English version

5. CONTROL MENU OVERVIEW

6. DMX FUNCTION CHART

Control Panel

3-Channel Mode

Function Menu

Button Function

Menu Selects operating mode or exits submenus

Up Scrolls up through option lists or selects higher value

Down Scrolls down through option lists or selects lower value

Enter Activates displayed menu option or selected value

Mode Options/Values Description

1-CH d001–512 1-channel DMX mode

3-CH d001–512 3-channel DMX mode

U-- d000-255 Manual dimmer setting

S000-255 Manual strobe setting

dIM

OFF

Dimmer curve setting

(O, Fast, Medium, Slow)

dIM 1

dIM 2

dIM 3

FAN Auto Set fan to Auto mode or

always On

Channel Function Value Percent/Setting

1 Dimmer 000-255 0–100%

2Strobe 000-010 No function

010-255 Strobe speed (slow to fast)

P. 7

- Neo Elipsoled Lite 50

English version

7. OPERATION

FRAMING SHUTTERS

• Use the (4) framing shutters to shape the pro-

jected beam.

ZOOM and FOCUS KNOBS

• Use the Zoom knob to adjust beam angle.

• Use the Focus knob to adjust sharpness of pro-

jected patterns or beam edges.

CUSTOM GOBOS

• The gobo holder accepts M size (66mm outer/

48mm inner) custom gobos.

GELS

• Color gels may be inserted in the gel frame,

which ts into the gel frame holder.

DMX MODES

• Press MENU button until 1-CH or 3-CH is

displayed.

• Press ENTER to select 1-channel or 3-channel

DMX mode.

• Press UP or DOWN to select DMX starting address.

• Press ENTER.

1-Channel Mode

MANUAL DIMMING AND STROBE

• Press MENU button until U-- is displayed.

• Press ENTER.

• Press UP or DOWN to select dimmer (d000-255)

or strobe (S000-255).

• Press ENTER and use UP or DOWN to select

values.

SELECTING DIMMER CURVES

• Press MENU button until dIM is displayed.

• Press ENTER Press UP or DOWN to select dim-

mer curve (OFF, dIM1, dIM2, dIM3).

• Press ENTER.

FAN

• Press MENU button until FAN is displayed.

• Press ENTER.

• Press UP or DOWN to select AUTO or ON.

• Press ENTER.

Channel Function Value Percent/Setting

1 Dimmer 000-255 0–100%

7 Dimmer Speed

000-051 Dimmer Speed set from display

052-101 Dimmer speed mode o

102-152 Dimmer speed mode 1 fast

153-203 Dimmer speed mode 2 medium

204-255 Dimmer speed mode 3 slow

P. 8

Neo Elipsoled Lite 50 - English version

8. MAINTENANCE

Maintenance and Cleaning the Unit

• Make sure the area below the installation place

is free from unwanted persons during setup.

• Switch o the unit, unplug the main cable and

wait until the unit has cooled down.

• All screws used for installing the device and

any of its parts should be tightly fastened and

should not be corroded.

• Housings, xations and installation spots (ceil-

ing, trusses, suspensions) should be totally free

from any deformation.

• The main cables must be in impeccable condi-

tion and should be replaced immediately even

when a small problem is detected.

• It is recommended to clean the front at regu-

lar intervals, from impurities caused by dust,

smoke, or other particles to ensure that the

light is radiated at maximum brightness. For

cleaning, disconnect the main plug from the

socket. Use a so, clean cloth moistened with

a mild detergent. Then carefully wipe the part

dry. For cleaning other housing parts use only

a so, clean cloth. Never use a liquid, it might

penetrate the unit and cause damage to it.

Fuse Replacement

1. Disconnect this product from the power outlet.

2. Remove the safety cap by a screwdriver.

3. Replace the blown fuse with a fuse of the exact

same type and rating (T1A,250V).

4. Install the safety cap, and reconnect power.

9. TROUBLESHOOTING

Problems Possible causes Checks and remedies

Fixture does not light up

• No mains supply

• Dimmer fader set to 0

• All color faders set to 0

• Faulty LED

• Faulty LED board

• Check the power supply voltage

• Increase the value of the dimmer channels

• Increase the value of the color channels

• Replace the LED board

General low light intensity • Dirty lens assembly

• Misaligned lens assembly

• Clean the xture regularly

• Install lens assembly properly

Fixture does not power up

• No power

• Loose or damaged power cord

• Faulty internal power supply

• Check for power on power outlet

• Check power cord

• Replace internal power supply

P. 9

- Neo Elipsoled Lite 50

English version

Fixture does not respond

to DMX

• Wrong DMX addressing

• Damaged DMX cables

• Bouncing signals

• Check control panel and unit addressing

• Check DMX cables

• Install terminator as suggested

Contact an authorized service center in case of technical problems or not reported in the table can not be

resolved by the procedure given in the table.

Design and product specications are subject to change without prior notice.

P. 1 0

Neo Elipsoled Lite 50 -

1. DESCRIPCIÓN

ELIPSOLED LITE 50

Luminaria elipsoidal con led blanco cálido de 50W

Elipsoled Lite 50 es una luminaria LED elipsoidal

que tiene 1 LED de 50W y trabaja a una temperatura

color de 3500K. El equipo es de diseño compacto y

liviano y cuenta, entre sus atributos más salientes,

con un zoom manual que va desde los 20º a los 39º.

Elipsoled Lite 50 trae un portagobos integrado,

cuenta con foco manual, 4 curvas de dimmeo selec-

cionares, obturadores de haz y un práctico porta-ge-

latina. Entre sus características más salientes está

la incorporación de un puerto USB que permite,

mediante la utilización del NEO Stick USB, controlar

la unidad wireless o mediante la app NEO Wi de AM-

PRO®, disponible para iOS® & Android®.

Fuente & Ópticas

• Fuente de luz: 1 LED blanco cálido de 50W

• Temperatura color: 3500K

• Vida útil promedio: 50.000 horas

• Zoom: Zoom manual de 20º-39º

Datos fotométricos

• Flux @ 20º: 7.900 Lux @ 2M (6,5 pies)

• Flux @ 39º: 2.700 Lux @ 2M (6,5 pies)

• Reproducción de color: >81Ra

Efectos y funciones

• Dimmer: 0-100%

• 4 curvas de dimmeo

• Efecto estrobo: 0-30Hz

• Obturadores de haz estándar

• Foco manual

• Campo de luz plano y nivelado

• Portagobos incluido

• Tamaño del gobo:

• Exterior: 53,3 mm. (2 pulg.)

• Interior: 43 mm. ( 1,7 pulg.)

• Espesor: 2 mm. (0,07 pulg.) máximo

• Flicker free

• Operación muy silenciosa

• Portagelatina con clip incluido

Control

• Canales DMX: 1/3

• Modos de operación: DMX, Master/Slave, au-

tomático, DMX inalámbrico (via Neo Stick USB)

y control inalámbrico (via IR-6)

Físico

• Display LED de 4-digitos

• Conectores DMX: 2 conectores XLR (XLR-3

entrada y salida)

• Conectores de alimentación: Interlock de

Entrada/Salida

• Enfriamiento por ventilador ultra-silencioso

• Dimensiones: 480x157x381 mm. / 18,9x6,2x15

pulg.

• Peso: 4,2 Kg. / 9,3 Lbs..

Versión Español

Tabla de contenidos

Idiomas:

Otros manuales de Equipo de DJ de NEO

NEO

NEO ION 1915Z Manual de usuario

NEO

NEO PROTON 12 USB Manual de usuario

NEO

NEO FOLLOWER 400 LED Manual de usuario

NEO

NEO ION 610B RGBW Manual de usuario

NEO

NEO FRESNELED COLOR Manual de usuario

NEO

NEO NEO DOTZ Manual de usuario

NEO

NEO Moving Torch Manual de usuario

NEO

NEO STEAM F700 Manual de usuario

NEO

NEO PROTON IP 12 QA Manual de usuario

NEO

NEO Flex Par Manual de usuario

NEO

NEO ZOOM PANEL Manual de usuario

NEO

NEO PROTON IP Manual de usuario

NEO

NEO Blinder 64 Manual de usuario

NEO

NEO Mini Panel Manual de usuario

NEO

NEO PROTON IP QW ZOOM Manual de usuario

NEO

NEO FLEX STRIP Manual de usuario

NEO

NEO Ion 3715Z Manual de usuario

NEO

NEO FOLLOWER 35ST Manual de usuario

NEO

NEO ELIPSOLED 3100 MAX Manual de usuario

NEO

NEO ELIPSOLED 5600 MAX Torch 4000 Manual de usuario

NEO

NEO FOLLOWER 15R Manual de usuario

NEO

NEO PROTON IP 7 QA Manual de usuario

NEO

NEO ION 132 F Manual de usuario

NEO

NEO NEO STRIP GOLD Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario