
Installation Instructions
Chapter 1 – Getting Started
1.1 Subject
The NEO AUX adapter – an integration between an MP3 player and a factory installed
car stereo. Equipped with the specific vehicle harness and standard 3.5mm jack the NEO-
AUX interface will allow you to connect your MP3/DVD/XM player or iPod / iPhone to
the car stereo system easily.
1.2 Introduction
Thank you for purchasing the NEO-AUX adapter, which has been designed to provide
endless hours of listening pleasure through most vehicles factory radios. To insure that
your AUX interface performs correctly in your vehicle, we recommend that you read this
entire manual before attempting installation
.
1.3 Precautions
Proper mounting location
Securely install the interface in a location that is free from heat, humidity, moving parts,
or direct sunlight. Beware of hot airflow from your vehicle’s climate control system. We
recommend securing the interface to a suitable location, free of sharp metal edges, using
double-sided tape, Velcro, or wire ties.
1.4 Disclaimer
• This product is not affiliated with any of the OEM manufactures.
• Modifying the radio may void any outstanding warranty.
• The purchase of this product carries with it no warranties, either expressed or implied.
• While every care has been taken to provide a quality product, we cannot guarantee that
the Neo Aux adapter will function correctly if installation is not done according to the
instructions provided in this guide. We also cannot guarantee that the NEO AUX adapter
will function correctly with an MP3 player if the MP3 player is broken or damaged or not
supported.
• Keep your eyes on the road while driving!
• We are not liable for the misuse of this product. Misuse includes improper installation,
damage to the board or radio while trying to install it, and the illegal use of the radio.
1.5 Completeness and connection of set
a) NEO AUX adapter set consists of the following (see figure 1).