Nematron AEMNM10-876 Manual de usuario

AEMNM10-876

Intel®Atom D2550

Mini-ITX Motherboard

User's Manual

Version 1.2

Date: 2012.11

Preface

Contents

Trademarks .................................................................................. 3

Revision History.......................................................................... 3

Safety Instructions ...................................................................... 3

CE Conformity ............................................................................. 5

FCC-B Radio Frequency Interference Statement...................... 5

WEEE Statement ......................................................................... 6

Chapter 1 Overview................................................................. 7

Mainboard Specifications ......................................................................7

Mainboard Layout...................................................................................9

Chapter 2 Hardware Setup.................................................... 10

Quick Components Guide....................................................................10

Memory.................................................................................................. 11

Installing Memory Modules............................................................................ 11

Power Supply ........................................................................................ 11

DC Power Connector: JPWR1 ....................................................................... 11

HDD Power Connector: JHDDPWR1, JHDDPWR2 ...................................... 11

Back Panel I/O.......................................................................................12

D2550 / N2800 ..................................................................................................12

N2600................................................................................................................12

Connector..............................................................................................15

Serial ATA Connector: SATA1 ~ SATA2.........................................................15

Front Panel Pinheader: JFP1 .........................................................................15

Fan Power Connector: SYSTEM_FAN1 ........................................................16

Audio Amplifier Pinheader: JAMP1...............................................................16

Front Audio Pinheader: JAUD1 .....................................................................16

Front USB Pinheader: JUSB1, JUSB2 ..........................................................17

RS-232 Serial Port Pinheader: JCOM1, JCOM3 ...........................................17

LVDS Connector: JLVDS1, JLVDS2...............................................................18

GPIO Connector: J1 ........................................................................................19

TPM Module Pinheader: JTPM1.....................................................................20

Jumper...................................................................................................20

Clear CMOS Jumper: JBAT1 ..........................................................................20

AT / ATX Select Jumper: JAT1 .......................................................................21

Serial Port Power Jumper: JCOMP1, JCOMP2, JCOMP3, JCOMP4 ..........21

Backlight Pinheader & LVDS Power Jumper: JVDD1, JVDD2....................21

Slot.........................................................................................................22

Mini-PCIe (Peripheral Component Interconnect Ex- press) Slot ...............22

Preface

PCI (Peripheral Component Interconnect) Slot ...........................................22

Chapter 3 BIOS Setup ........................................................... 23

Entering Setup ......................................................................................23

Control Keys ....................................................................................................23

Getting Help .....................................................................................................24

General Help <F1>...........................................................................................24

The Menu Bar ........................................................................................25

Main .......................................................................................................26

Advanced...............................................................................................27

Boot .......................................................................................................36

Security..................................................................................................37

Chipset...................................................................................................39

Power.....................................................................................................40

Save & Exit ............................................................................................41

Preface

We take every care in the preparation of this document, but no guarantee is

given as to the correctness of its contents. Our products are under continual

improvement and we reserve the right to make changes without notice.

Trademarks

All trademarks are the properties of their respective owners.

NVIDIA®is registered trademark of NVIDIA Corporation.

ATI®is registered trademark of ATI Technologies, Inc.

AMD®is registered trademarks of AMD Corporation.

Intel®is registered trademarks of Intel Corporation.

Windows®is registered trademarks of Microsoft Corporation.

AMI®is registered trademark of Advanced Micro Devices, Inc.

Award®is a registered trademark of Phoenix Technologies Ltd.

Realtek®is registered trademark of Realtek Semiconductor Corporation.

Revision History

Revision

Revision History

Date

V1.2

For PCB v1.x

2012/11

Safety Instructions

Always read the safety instructions carefully.

Keep this User’s Manual for future reference.

Keep this equipment away from humidity.

Preface

Lay this equipment on a reliable flat surface before setting it up.

The openings on the enclosure are for air convection hence protects the

equipment from overheating. DO NOT COVER THE OPENINGS.

Make sure the voltage of the power source and adjust properly 110/220V

before connecting the equipment to the power inlet.

Place the power cord such a way that people can not step on it. Do not

place anything over the power cord.

Always Unplug the Power Cord before inserting any add-on card or

module.

All cautions and warnings on the equipment should be noted.

Never pour any liquid into the opening that could damage or cause

electrical shock.

If any of the following situations arises, get the equipment checked by

service personnel:

The power cord or plug is damaged.

Liquid has penetrated into the equipment.

The equipment has been exposed to moisture.

The equipment does not work well or you can not get it work

according to User’s Manual.

The equipment has dropped and damaged.

The equipment has obvious sign of breakage.

DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT

UNCONDITIONED, STORAGE TEMPERATURE ABOVE 60℃(140℃),

IT MAY DAMAGE THE EQUIPMENT.

CAUTION:

Danger of explosion if battery is incorrectly replaced. Replace

only with the same or equivalent type recommended by the

manufacturer.

警告使用者:

这是甲类信息产品，在居住的环境中使用时，可能会造成无线电

干扰，在这种情况下，使用者会被要求采取某些适当的对策。

废电池请回收

For better environmental protection, waste batteries should be

collected separately for recycling or special disposal.

Preface

CE Conformity

Hereby, we declare that this device is in compliance with the

essential safety requirements and other relevant provisions set

out in the European Directive.

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the

measures listed below:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

Consult the dealer or an experienced radio/television technician for

help.

Notice 1

The changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and AC power cord, if any, must be used in order to

comply with the emission limits.

VOIR LANOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.

This device complies with Part 15 of the FCC Rules. Operation is subject to

Preface

the following two conditions:

1. this device may not cause harmful interference, and

2. this device must accept any interference received, including interference

that may cause undesired operation.

WEEE Statement

Under the European Union (“EU”) Directive on Waste Electrical and

Electronic Equipment, Directive 2002/96/EC, which takes effect on

August 13, 2005, products of “electrical and electronic equipment”

cannot be discarded as municipal waste anymore and

manufacturers of covered electronic equipment will be obligated to take back

such products at the end of their useful life.

Chapter 1 Overview

Thank you for choosing the AEMNM10-876, an excellent industrial computer

board.

Based on the innovative Intel®NM10 chipset for optimal system efficiency, the

AEMNM10-876 accommodates the Intel®Cedarview-M / Cedarview-D

processor and supports up to 1 DDR3 1066MHz Non-ECC SO- DIMM slot to

provide the maximum of 4GB memory capacity.

In the advanced-level and mid-range market segment, the AEMNM10-876

provides a high-performance solution for today’s front-end and general

purpose workstation, as well as in the future.

Mainboard Specifications

CPU Chipset

Intel Cedarview-D D2550 / Cedarview-M N2800 /

Cedarview-M N2600 processor

North Bridge: integrated with CPU

South Bridge: Intel NM10 chipset

Memory

1 DDR3 1066MHz Non-ECC SO-DIMM slot

Supports the maximum of 4GB for D2550 / N2800

Supports the maximum of 2GB for N2600

LAN

2 Intel 82574L GbE controllers for D2550 / N2800

1 Intel 82574L GbE controller for N2600

Storage

2 SATA 3Gb/s ports by Intel NM10 chipset

1 Mini-PCIe slot for mSATA

Audio

HDA Codec by Realtek®ALC887 or ALC886

Compliant with Azalia 1.0 specs

With amplifier

Graphics

Intel 3650 series / 3600 series integrated Graphics

Engine

Resolution up to 1920 x 1200 pixels

Back Panel I/O

1 PS/2 mouse port

1 PS/2 keyboard port

1 VGA port

1 DVI-D port

2 serial ports

Chapter 1 Overview

2 Gigabit LAN jacks

4 USB 2.0 ports for D2550 / N2800

2 USB 2.0 ports for N2600

1 Line-In audio jack

1 Line-Out audio jack

1 Mic-In audio jack

Onboard

Connectors /

Pinheaders /

Jumpers

2 USB 2.0 pinheaders (4 ports)

1 amplifier pinheader

8 serial port pinheaders for D2550

4 serial port pinheaders for N2800 / N2600

1 GPIO pinheader

2 LVDS connectors

1 front audio pinheader

1 TPM pinheader

1 clear CMOS jumper

1 AT/ATX select jumper

4 serial port power jumpers

2 backlight pinheader & LVDS power jumpers

Slot

1 PCI slot (supports -12V)

1 Mini-PCIe slot

Form Factor

Mini-ITX: 170mm x 170mm

Environ- mental

Operating Temperature: 0oC to 60oC

Storage Temperature: -20oC to 80oC

Humidity: 0% ~ 90% RH, non-condensing

Chapter 1 Overview

Mainboard Layout

Tabla de contenidos

Otros manuales de Placa madre de Nematron

Nematron

Nematron AEMQ87-953 Manual de usuario

Nematron

Nematron AEMQ77-989 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario