Nedap !D Hand 2 Manual de usuario
!D Hand 2
Manual ASSY HH2
Page of 2 22 Manual ASSY HH2
Contents
1 Introduction _________________________________________________________________________________ 3
RFID Regions ______________________________________________________________________________ 4
CE WEEE __________________________________________________________________________________ 4
2 Product overview ____________________________________________________________________________ 5
Box contents ______________________________________________________________________________ 5
Components and connections _______________________________________________________________ 6
Add-ons __________________________________________________________________________________ 6
3 Using the device _____________________________________________________________________________ 8
Turning it on ______________________________________________________________________________ 8
Charging it ________________________________________________________________________________ 8
Linking it to an accessory device ____________________________________________________________ 10
Reading RFID labels _______________________________________________________________________ 11
Reading a barcode ________________________________________________________________________ 12
Turning it off _____________________________________________________________________________ 13
4 LEDs ______________________________________________________________________________________ 14
Status LED _______________________________________________________________________________ 14
Bluetooth LED ____________________________________________________________________________ 14
Battery LED ______________________________________________________________________________ 15
5 App development ___________________________________________________________________________ 16
6 Troubleshooting ____________________________________________________________________________ 17
7 Regulatory information ______________________________________________________________________ 18
FCC and IC Compliance statement ___________________________________________________________ 18
FCC and IC Radiation Exposure Statement ____________________________________________________ 18
FCC Information to the user ________________________________________________________________ 19
Information for Taiwan ____________________________________________________________________ 19
Trademarks ______________________________________________________________________________ 19
Licenses _________________________________________________________________________________ 20
8 About Nedap _______________________________________________________________________________ 21
About ___________________________________________________________________________________ 21
Contact __________________________________________________________________________________ 21
Page of 3 22 Manual ASSY HH2
1 Introduction
The Nedap !D Hand 2 (ASSY HH2) is an RFID handheld reader that is easy to use, lightweight and has a high
performance. It can be connected with Bluetooth to a 3rd party device. Due to the 'Made for iPhone, iPod,
iPad' certification it works with iOS devices.
The !D Hand 2 is able to read and write UHF RFID labels (RAIN RFID) and also includes a 2D barcode scanner.
The !D Hand 2 can be charged wireless with a docking station, or by the Micro USB connector.
Knowledge Base articles
This manual provides an overview of the products, the installation and configuration. To obtain more
details on various topics or background information, several Knowledge Base articles are available,
and are referred to in this manual. You can find the Knowledge Base articles on the Nedap Retail
Partner Portal.
This manual covers the following products:
Article
number Article name Technologies FCC ID IC
9215441 !D Hand 2 - ASSY HH2 RFID R1
WHITE
UHF RFID, 2D
Barcode
9565035 !D Hand 2 - ASSY HH2 RFID R2
WHITE
UHF RFID, 2D
Barcode
CGDHH2RFID
Contains:
QOQWT12
1444A-HH2RFID
Contains:
5123A-BGTWT12A
Page of 4 22 Manual ASSY HH2
RFID Regions
Region 1: Europe (ETSI EN 302 208), Armenia, Azerbaijan, Hong Kong, India, Jordan, Oman, Russia, Saudi
Arabia, South Africa, Tunisia and United Arab Emirates
Region 2: United States (FCC Part 15.247), Brazil, Argentina, Canada, Chile, Colombia, Costa Rica, Dominican
Republic, Israel, Mexico, Panama, Peru, Taiwan, Uruguay and Venezuela
Region 3: People's republic of China, New Zealand, Australia, Singapore, Hong Kong, Japan, Korea, Thailand
and Vietnam
CE WEEE
This European Standard specifies a marking:
of electrical and electronic equipment in accordance with Article 11(2) of Directive 2002/96/EC
(WEEE); This is in addition to the marking requirement in Article 10(3) of this Directive which requires
producers to mark electrical and electronic equipment put on the market after 13 August 2005 with a
‘crossed-out wheeled bin’ symbol.
that applies to electrical and electronic equipment falling under Annex IA of Directive 2002/96/EC,
provided the equipment concerned is not part of another type of equipment that does not fall within
the scope of this Directive. Annex IB of Directive 2002/96/EC contains an indicative list of the products,
which fall under the categories set out in Annex IA of this Directive;
that serves to clearly identify the producer of the equipment and that the equipment has been put on
the market after 13 August 2005.
Page of 5 22 Manual ASSY HH2
2 Product overview
The !D Hand 2 is available in certain hardware editions depending on the region.
In this document the following abbreviations will be used from here onwards:
' ' is an abbreviation for UHF RFID technology.RFID technology
Box contents
Article number Article name Box contents
9215441 ASSY HH2 RFID R1 WHITE !D Hand 2
Micro USB charger
Manual
9565035 ASSY HH2 RFID R2 WHITE
Page of 6 22 Manual ASSY HH2
Components and connections
In the following schematic drawing the components and connections of the !D Hand 2 are highlighted.
Number Component Description
1 Button The button is used to control the !D Hand 2.
2 Status LED Indicator that indicates whether the !D Hand 2 is on, off or operating.
3 RFID antenna Antenna that is used to read the RFID labels.
4 2D barcode scanner Barcode scanner to read all common 1D and 2D barcodes.
5 Serial number indication Serial number indication that is useful during Bluetooth pairing.
6 Bluetooth LED Indicator for the Bluetooth connection status.
7 Micro USB connector The Micro USB connector can be used to charge the device.
8 Battery LED Status of the battery is indicated with this LED.
Add-ons
There are several add-ons available for the !D Hand 2. The add-ons have their own manual, however, we will
discuss the function of those add-ons here.
Page of 7 22 Manual ASSY HH2
Docking station
The docking station is a wireless charging station for the !D Hand 2. When placing the !D Hand 2 in the
docking station, it will automatically start charging. The docking station can be mounted on the wall or placed
on a table or desk. The docking station has a Micro USB connector for a charger.
Bumper
The bumper protects the !D Hand 2 in challenging environments. It is made out of rubber. You can slide it over
the !D Hand 2.
Combining the bumper and docking station
When the bumper is being used on the !D Hand 2, the device cannot be placed in the docking
station. The Micro USB charger can be used to charge it.
Page of 8 22 Manual ASSY HH2
3 Using the device
The !D Hand 2 has just one button which makes it extremely easy to operate. Feedback is provided by means
of the three LEDs, sounds and a vibration motor.
Turning it on
To turn the !D Hand 2 on, press and immediately release the button. You should feel a short buzz as you press
the button and the Status LED will turn on.
Step Action and/or result
1 Press and immediately release the button.
2 The Status LED will turn on.
When nothing happens
When nothing happens when you press the button, the battery might be empty. Please first charge
the !D Hand 2 before you try to use it.
Charging it
Charging the !D Hand 2 can be done in two ways:
Page of 9 22 Manual ASSY HH2
1.
2.
Using the included Micro USB charger.
Using the optional docking station.
Docking station
For instructions how to operate the !D Hand docking station, please refer to the manual of the
docking station.
To charge the !D Hand 2 using the Micro USB charger, connect the Micro USB charger to the Micro USB port at
the handle of the device.
When connected, the Battery LED should turn one of two colors:
When the Battery LED turns green, the device is already fully charged.
When the Battery LED turns orange, the device starts charging.
Page of 10 22 Manual ASSY HH2
Step Action and/or result
1 Connect a Micro USB charger.
2The Battery LED will turn on. It will indicate whether the device has started charging (orange) or is already
fully charged (green).
Charging with other chargers
You can also charge the !D Hand 2 by using a Micro USB cable and connect the device to a computer.
Note that the !D Hand 2 charges faster when using the supplied Micro USB charger instead of being
connected to a computer.
Linking it to an accessory device
To use the !D Hand, it should be linked to an accessory device. Please follow the instructions on how to link it
in the manual of the accessory device.
You can find the Bluetooth name of the device at the bottom of the !D Hand 2. It is listed as ‘!D Hand XXX’,
where XXX are part of the serial number of the device. This should make it easy to recognize with !D Hand 2
you are pairing with.
!D Hand 2 should be turned on before you can link it
Please note that the !D Hand 2 should be turned on before you can link it up with the accessory
device.
Tabla de contenidos
